Parts for County Line 11A-B2AQ794 / 2014: .Quick Reference Parts

One of the essential parts of a walk-behind lawn mower is the gas cap. Many people don't notice that mower fuel caps are almost always rubberized or hard plastic and that they are black in color. These are specific design reasons for this. Other openings in the mower's body, especially the oil fill, are coded with different colors. This is meant to prevent users from pouring any incorrect substance into a container where it could damage the mower in any way. The rubber or hard plastic cap is meant both to be durable and non-conductive. In the past, mower caps were made of vented steel, which was conductive. Since a gallon of gasoline has the explosive potential of two sticks of dynamite, manufacturers have resorted to a number of wise safety measures to prevent accidents. As durable as they are, these caps do sometimes need to be replaced. If a cut or a heat-related deformation causes the cap to lose its water-tight capability, it must be replaced. Often caps are lost when users forget to replace them after gassing up. When choosing a replacement cap for a Troy-Bilt, MTD, or Yard-Man mower, make sure to select one like this OEM genuine certified replacement fuel cap. It's important to make sure the generator is not running when you replace the cover.

This cover is a genuine MTD part, sold individually. This cover can be used as a replacement part in a lawn mower. This cover helps to protect the mower from exposure to dust and the elements.If the cover is punctured, ripped, torn, or otherwise leaves the lawn mower exposed, the cover should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This cover is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

An air filter is a machine's first line of defense against tiny particles that may clog and disrupt an engine or carburetor's efficiency. When air passes through, its filter media traps or captures dust and dirt. Eventually, the accumulation can become problematic. This is because a dirty filter also restricts optimal airflow. The carburetor needs air to create the engine's required combustible mixture. At this point, a dirty air filter can mean overheating, as well as uneven fuel-air ratio production. For optimum filtering performance, it is necessary to periodically install a brand-new air filter. It is a simple procedure and doesn't require any tools. Replacement is straight-forward. Simply take out the old filter and insert the new one. This original MTD air filter is compatible with lawnmowers from Yard-Man and MTD. It is also compatible with some Honda engine models. This brand-new air filter is sold individually.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This wheel assembly is created for a variety of lawnmowers and attaches to the front of the machine. The wheel is made from a durable plastic material and connects to the front axle assembly. It is a required part for moving the lawnmower around the yard. The wheel can sometimes become broken or experience damage which results in the need to replace it. Pushing it over large items or bumping into things can cause damage.A visual inspection of each of the front wheels on a lawnmower will provide information about whether it needs to be replaced or not. If the wheel is broken or has a large amount of damage, it will need to be removed and replaced. Taking off the wheel and replacing it with a new one may require a variety of tools including a wrench set, a screwdriver, and a socket set. This wheel assembly is made for lawnmowers created by Bolens, Craftsman, Murray, Huskee, MasterCut, MTD, Yard-Man, and Yard Machines. It is a genuine OEM replacement part that is sourced directly from the manufacturer. It comes with a single wheel assembly.

This grass catcher frame holds the grass-catching bag, which captures grass clippings for compost or simply to remove yard waste. Bagging rather than mulching allows grass to get higher and thicker without putting added stress on the mower. The internal grass catchers frame can become bent and not suitable for further use, making it impossible to bag clippings until it is replaced. This OEM replacement handle is the answer for mowers made by these manufacturers: Bolens, Murray, Mastercut, Troy-Bilt, Yard Machines, Craftsman, Yard-Man, and Cub Cadet. This OEM part is sold individually.

This is a blade adapter that is intended for use with lawnmowers. The blade adapter attaches the motor shaft to the lawnmower blade. A new blade adapter may be needed if there is any damage to the part. Any damage to the blade adapter can make the lawnmower vibrate excessively and loosen the blade mounting. If the blade loosens, it can strike the housing or the ground and cause it to break. This can be dangerous. Blade adapters are designed to be a breaking point between the blade and the crankshaft, making any damages less expensive to repair. Make sure to wear gloves when performing care and maintenance or replacing any parts on a lawnmower. The spark plug wire should be disconnected before attempting to install the blade adapter. A power drill, wrench set, and socket set are required to replace this part.This blade adapter is a genuine OEM Craftsman part. It is sold individually. This particular blade adapter is compatible with lawnmowers that are manufactured by the Husqvarna brand.

This is a genuine replacement for select walk-behind push lawn mowers. The hinged mulch cover is designed to replace the clippings chute that allows discharge so that the grass is more finely mulched in the machine. This part includes a metal hinge, which can break or snap over time. The plastic itself can also become damaged by debris or impacts, or simply crack due to age. Replacing the mulch cover with a genuine OEM model like this can be the ideal solution. If the cover is not replaced, the mulching feature will not be able to be used. This OEM replacement mulching cover is compatible with lawn mowers from MTD, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, and Husky. This product includes the metal bracket and spring that are required for installation and securing the cover, sold as a single assembly. This hinged mulching cover can be used with 150+ lawn mowers from the brands listed above. No tools are required for this part replacement but it is important to be careful of pinch injuries when working with parts like this spring-hinged cover.

Designed for comfortable mowing, this trail shield attaches to walk-behind lawnmowers. It secures to the back of the deck on the lawnmower and prevents grass and other debris from reaching the person using the mower. This trail shield is made of durable plastic but can become damaged use. If it is broken, it will not be able to keep grass from collecting behind the mower deck, so it will need to be replaced.To replace the part with a new shield, put the lawnmower on a stable surface and ensure it is powered off. On the original trail shield, find the metal clasps that hold it secure. Unclasp each of these and remove the trail shield from the lawnmower. The new replacement part can be attached and the lawnmower will operate correctly.This trail shield is an authentic OEM replacement part that is directly sourced from the manufacturer. It is an individual component and does not come with hardware. The part is compatible with lawnmowers by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Troy-Bilt, Huskee, Murray, MTC, and Yard Machines.

This replacement part is a hex bolt. It is a genuine replacement part made by MTD. Hex bolts are named because they are shaped like a hexagon and are different from the regular circle-shaped bolts. These parts are able to hold other parts secure and in place so that everything can operate as needed. A new hex bolt might be needed if the current ones are damaged in any way. It is possible that these bolts become stripped or lodged in place over time due to normal wear and tear and should be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous part is stuck. Be sure the engine is completely powered down before beginning this repair. This bolt is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

A side discharge chute is engineered to move the debris away from the machine's underside. This is because grass that is not only long and thick but also moist can get trapped and clog the deck and the blades. When this happens, you will have to stop to clear the accumulated clippings periodically. To mitigate clogging and maximize cutting, using a side discharge chute is ideal. When a side discharge chute is installed, but clogging still occurs, there might be a problem with the chute itself. It can be torn or already loose. Luckily, installing a brand-new side discharge chute is easy and will take less than 5 minutes. Start the installation by removing the spark plug. The engine should be cool to the touch. Then, lift and hold the mulch cover up. Take the brand-new side discharge chute and hook the tabs on to the hinge pins. Then, release the mulch cover. MTD manufactures this brand-new side discharge chute. It is an original replacement with Craftsman, MTD, Murray, Yard-Man, Yard Machines, Bolens, Huskee, and Mastercut lawnmowers. It comes in solid plastic material with a black finish. This side chute is sold individually.

A mulching blade has a unique curved or angled design that allows discharging, bagging, and mulching. If its edges are already dull, it can lead to longer mowing time and frayed and torn grass blades. Mulching blade installation is easy. First, unplug the spark plug wire. Then, position the lawnmower on its side. Get a woodblock, preferably 6 x 2 in size, and put it between the old blade and housing deck. Make sure that the wood will prevent the old blade from moving. Take a socket wrench and remove the blade’s nut and washer. Remove the old blade and put the new mulching blade in. Put the nut and washer back and tighten until it is secured. You can use the woodblock to prevent the replacement blade from moving when it is tightened. This mulching blade replacement s an original MTD product. This OEM mulching blade can be used for MTD, Craftsman, Cub Cadet, Murray, Yard-Man, and Bolens lawnmower models. This brand-new mulching blade is sold individually. The support blade and screw hex are sold separately.