Parts for Craftsman 13BL78ST299 / 2013: .Quick Reference Parts

High blades are used on lawnmowers and perform well in all conditions. They are curved on the ends more deeply than low blades, which creates more suction to circulate the cut grass and discharge the clippings more efficiently. High blades work well in deep or wet grass and are less likely to cause clogging. High blades can wear out or become damaged with time and will require replacement.To replace a high blade for a lawnmower, find out what corresponding sized wrench is required to loosen the bolts affixing the current blade. Ensure that the lawn tractor is completely cool before starting, and always wear gloves when working with lawn tractor blades. Remove the old blade, and clean up around the area where the new blade goes before installing and securing it tightly.The high blade is an authentic OEM part made by the MTD manufacturer. The blade is 23.5 inches and is only compatible with the MTD brand lawn tractors with the matching star pattern. It is made of durable, high-quality metal. This is a single lawnmower blade. If two lawnmower blades are required, they must be ordered separately.

This is an oil filter that facilitates the removal of harmful contaminants from the engine oil. This part is designed to help maintain the optimum performance of an engine in compliance with the necessary EPA emissions regulations. It is recommended that the oil filter is replaced annually or every 100 hours. Remember to prepare something to catch the oil when replacing the oil filter. The old one will need to be unscrewed to replace it, but be sure to coat the seal of the new filter with oil before installing it. To ensure that the new oil filter is in place, make sure it touches the plate it seals against by giving the filter a firm turn to tighten it down. This replacement part is an individual genuine OEM part. It is compatible with small engines, lawnmowers, generators, snowblowers, and wood chippers from Toro, Lawn-Boy, Simplicity, Snapper, and Briggs & Stratton.

This oil filter wrench is a genuine MTD part, sold individually. This oil filter wrench can be used as a replacement part in a lawn mower or a log splitter. The purpose of an oil filter wrench in a lawn mower or a log splitter is to access and remove an oil filter that is deeply recessed and cannot be removed by hand without a supplemental component.The oil filter wrench might have to be ordered as a new component or as a replacement part in an oil filter wrench that has suffered damage to the point of reduced or no efficacy. If the oil filter wrench has been chipped, cracked, dented, warped, or eroded to the point that it cannot access the oil filter or if the operator does not own an oil filter wrench, this oil filter wrench should be ordered as a genuine OEM part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil filter wrench is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This replacement part is a suitcase weight. This is a genuine replacement part made by MTD. This part is typically used to weigh large bags of debris collected by lawn mowers in any way.A new suitcase weight might be needed if the current one is damaged in any way. If the weight is off or unable to properly measure any large bags of debris, a new weight might be needed. Refer to the user manual for more details on how to use this part. Typically this suitcase weight is an added function and option for many lawn mower users. It comes in handy when needing to measure the weight of large bags of debris or leaves. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a set of two keys that are used with lawn tractors. Keys are put into the ignition and turned to start the engine.A new set of keys will be needed if the originals are cracked, broken, bent, or damaged in any way such that the key will not slide into the ignition. Keys can also be easy to misplace, which is another reason why someone may want to replace their keys. It's also a good idea to have extras on hand in the event that the keys are lost.This key set is a genuine MTD part. It is sold individually. This particular key set is compatible with lawn tractors that are manufactured by the MTD brand and Craftsman brand.

This air cleaner filter is a genuine MTD part, sold individually. This air cleaner filter can be used as a replacement part in a lawn mower. The purpose of the air cleaner filter in a lawn mower is to protect the internal machinery from debris. To ensure the lifespan of a lawn mower, the air cleaner filter should be checked regularly and replaced if it is damaged or significantly dirty.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This air cleaner filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, and Simplicity.

This replacement part is a bagger and is intended for use with lawn mowers. This part is compatible with various kinds of lawn mowers. The bagger is responsible for collecting the leaves and other debris during use so that the user can clean up more easily. A new bagger might be needed if the current part is no longer working properly or is damage. If the part cannot stay attached to the lawn mower, it might be best to replace it altogether. If the bag has visible tears or rips, consider replacing this part as well. This should be a fairly simple repair. This is a genuine replacement part made by MTD, sold individually.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

This authentic OEM replacement ball joint assembly is a part of the front suspension of a lawn tractor or riding mower. Suspensions are complex systems that include joints, bushings, and bearings that must all work together to turn and maintain contact with the ground. This ball joint assembly helps to connect all of these components. It works similarly to a human hip in that it has a joint and a ball that allows for pivot motions. The most common reason for a ball joint assembly to go bad is if it loses lubrication or becomes gritty. In order to work smoothly, these joints must stay well oiled or else they will grind and break. If the ball assembly breaks, use a wrench to disengage the wheel and change out the part. This is a fairly straightforward repair and should not take more than a few minutes. This replacement assembly is a high-quality part for Cub Cadet, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Bolens, Ryobi, and Yard Man machines. This part is sourced from the original parts manufacturer and ships individually.

The cable seen here is an authentic replacement that is sourced from the manufacturer. This control cable is used for lawn mowers. It will pivot to pull the belt idler pulley, which will fasten the belt and spin the mower's cutting blades. When the cable is not working properly, it could mean that the blades will not spin properly and not provide the mower with the cutting capability that it should have. The cable that comes with the mower tends to be durable, but this does not mean that it will not need to be replaced at some point. Many things could happen to the cable that would require a replacement. The spring might start to wear out, for example. The cable could become frayed or corroded, as well. Owners should always make sure they are wearing gloves when replacing this part. They will need a screwdriver and pliers to complete the repair. The cable is a genuine OEM replacement part that is sold individually. This cable will work with more than 130 models of mowers. Brands with compatible models include Craftsman, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut.

When interlock switches are working properly, they will keep the engine from starting if there is no foot is not on the brake or if the parking brake is not set. When the switch breaks, it will not allow current to reach the starter even when the brake is on, which means the engine will not start. If the solenoid is not clicking when the ignition key on the tractor or mower is turned, the interlock switch is likely to blame. This is a genuine OEM replacement interlock switch that can help get a lawn tractor up and running again. Is is compatible with riding tractors and mowers from many different brands, including Craftsman, Bolens, Yard Machines, Yard-Man, MTD, and Troy-Built.

This is a rubber variable-speed belt designed for use with lawnmowers. This part ensures that the lawnmower is able to move. Since the belt is under a lot of stress, it can break, become damaged, or stretch out. When any of those things occur, the variable-speed belt will need to be replaced.A pair of pliers and a wrench set will be needed to replace the variable-speed belt. Before making the replacement, the pulleys should be cleaned to ensure the best longevity and performance with the belt. To change the belt, disconnect the spark plug wire and loosen the transaxle pulley. Take the tension off the drive belt, remove the belt, and then secure the new belt. To get the best performance out of the belt, it is a good idea to periodically inspect it for stretching or wear and tear.This variable-speed belt is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as a single component. The belt is made to be used in lawnmowers and lawn tractors made by Craftsman, Toro, Troy-Bilt, MTD, Huskee, Montgomery Wards, and Yard-Man.

The nut-hex flange 5/8-18 features a hex nut with a wide flanged portion at one end. This flange will act as an integrated washer that does not spin. Since the flange acts as a washer, it ensures that the nut can fasten to the material's surface evenly. If any of these nuts are removed from a machine to do other work, it is recommended to replace them with a new nut-hex flange. Check the nuts that are currently on the machine at least once a year. Make sure they are properly tightened and that they are in good condition. Replace them as needed. This OEM part will work for many types of equipment, including lawnmowers, edgers, snowblowers, and lawn tractors. The part will work with many brands, including Ryobi, Poulan, Bolens, Yard-Man, MTD, Yard Machines, and Troy-Bilt.