Parts for Craftsman 24A-070H799 / 2014: .Quick Reference Parts

Pre-cleaner filter wraps around your engine's air filter to trap large debris before it reaches the main filter. Replace when torn or clogged to maintain airflow and engine protection. Verify fit by model number.

Fix hard starting, rough running, or engine misfires with this spark plug. Common repair for walk-behind mowers and chipper-shredders. Easy 15-minute fix.

Replacement debris collection hose for chipper shredders and lawn vacuums. Connects unit to collection bag. Replace if cracked, torn, or missing.

Weak suction or poor debris collection? This vacuum impeller generates airflow for chippers, shredders, and lawn vacuums. Restores pickup performance.

This speed control cable connects the handle-mounted speed lever to the drive system on a self-propelled lawn mower. It allows the operator to adjust ground speed by transmitting input from the control lever to the transmission. Replace this cable if the mower no longer responds to speed adjustments, the cable is frayed or kinked, or the self-propel function is intermittent.

Replacement grass collection bag for chipper shredders and lawn vacuums. Catches clippings and debris during operation. Replace if torn or damaged. Verify fit with your model number before ordering.

Replacement discharge chute assembly for chipper shredders. Directs debris away from machine during operation. Replace if cracked, broken, or missing.

Air filter element for walk-behind mowers and outdoor equipment. Replace when clogged or damaged to maintain engine performance. Confirm fit with model.

This is a snap mount safety switch that is a part of many types of lawn and garden equipment. The safety switch is made of plastic and has a metal four-pronged plug on the bottom. A button is located on the top. Inside of the base, there are two sets of contacts. One set is used to create a circuit between two blades, while the other set makes the circuit for the other pair of blades. One set is grounded and the other connects to the engine of the tool.Replacing the safety switch is required if it is no longer working or has been damaged. Turn off the tool, allow it to cool, and disconnect the spark plug wire. Remove the engine cover before taking off the fuel tank assembly. The engine blower housing will also need to be removed. Access the snap mount safety switch and take it out of the tool before attaching a new switch.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The snap mount safety switch is designed to be used with wood chippers, leaf blowers, and lawnmowers manufactured by Craftsman, Yard Machines, Cub Cadet, Yard-Man, and MTD.

This is a control cable that connects the operator handle lever to the drive clutch mechanism on a lawn vacuum or chipper shredder. It engages and disengages the drive system when the lever is squeezed or released. Replace this cable if the self-propel function does not engage, the cable is frayed or stretched, or the drive does not disengage when the lever is released.

Protective hubcap for lawn mower wheels. Snaps onto wheel center to shield the axle and wheel frame from dirt and damage. Replace if cracked or missing.

This is a knob handle that is used on various types of lawn and garden equipment. It is responsible for helping to make adjustments to the upper handle of the lawnmower or other machine. If the knob handle no longer works, is broken, or falls off, adjustments can no longer be made to the equipment. If this situation occurs, the knob handle will need to be replaced.Take a look at the knob handle and determine if it has been damaged. It could have cracks, broken areas, or excessive scratches that make it hard or impossible to use. If the knob handle is not present, this also necessitates a replacement. The part is easy to replace and requires no tools to install. Simply remove the old handle and place the new one in the same location.This is an authentic OEM replacement knob handle that is directly sourced from the manufacturer. It is sold as an individual component. The knob handle is used on lawnmowers, snowblowers, string trimmers, leaf blowers, wood chippers, and edgers. It fits various models offered by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This is a hand-operated siphon pump designed for transferring fluids such as oil, fuel, or other liquids in lawn and garden equipment. It allows you to easily drain or transfer fluids without tipping the equipment. Replace this pump if it is cracked, no longer creates suction, or leaks during use.

Replacement blade for chipper shredders. Installs on the cutting mechanism to chip wood into small pieces. Replace when dull, chipped, or damaged.

This is a replacement collection bag assembly designed for use with lawn vacuums and chipper shredders. It attaches to the discharge chute to collect leaves, grass clippings, and shredded debris during yard cleanup. Replace this bag if it has tears, holes, a broken zipper, or if debris is leaking out during operation.

If your chipper isn't shredding grass and debris effectively, replace the worn flail blade. Attaches to impeller assembly for efficient shredding.

Fuel cap seals the fuel tank and prevents dirt, debris, and contamination from entering your mower's fuel system. Replace if cracked, loose, or missing. Confirm fit with your model number.

Replacement front wheel assembly for walk-behind mowers. Installs on the front axle to restore mobility. Replace if wheel is cracked, worn, or damaged.

Filters debris from fuel before it reaches the engine. Replace annually or when experiencing fuel flow issues. Confirm fit with your model number.