Parts for Mtd Gold 12AVB2M7004 / 2013: .Quick Reference Parts

This replacement part is an adapter assembly. This is a genuine replacement part made by MTD. This adapter assembly piece is able to connect different parts so that the entire machine is able to work together and run smoothly and efficiently. A new adapter assembly might be needed if the current one is damaged in any way including being bent, dented, cracked, or chipped. It is also possible that this part can become stripped due to normal wear and tear. Be sure the engine is completely shut down before attempting to replace the adapter assembly. Work gloves are also recommended to protect the hands during any repair or replacement.This adapter assembly is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This 21-inch extreme blade is an OEM replacement part for select lawn mowers. Routine blade maintenance is an important part of owning a lawnmower. With regular sharpening and care, this durable blade made of high-quality metal should last for a long time. However, the blade can still become dull with regular use or damaged by hitting concrete or other objects. If the cutting as it should, replace it immediately for safety and effective operation. This OEM blade offers a greater cutting surface and extreme cutting power for compatible machines. Installing the blade is simple and only requires a wrench. Disconnect the spark plug for safety before accessing the mower deck. Always wear gloves when working on blades or engine components. This extreme blade replacement is designed for use with various MTD lawnmowers, as well as models from Troy-Bilt, Yard Machines, Yard-Man, and Craftsman. This blade is sold individually.

Fuel filters are created to strain out gas before it reaches the carburetor in lawnmowers and other gardening tools. Located in the fuel line or the fuel tank, it prevents unwanted debris from reaching the carburetor, which can cause engine damage. If the fuel filter is damaged or becomes clogged with material, it no longer offers the same protection to the carburetor. This can lead to difficulty starting the lawnmower and decreased performance. Correcting this issue early can prevent damage that might require a new lawnmower. Maintenance of the lawnmower by adding fuel stabilizer, changing the oil, and replacing the air filter will increase the life of lawn care equioment. Even if no issues are present, the fuel filter should be replaced after about 200 hours of use. Disconnecting the spark plug should be done prior to installing a new fuel filter. This fuel filter is a genuine OEM component directly from the manufacturer and comes as an individual part. It can be used with various Craftsman, Cub Cadet, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and Mastercut lawnmowers, tillers, blowers, and wood chippers.

This cover is a genuine MTD part, sold individually. This cover can be used as a replacement part in a lawn mower. This cover helps to protect the mower from exposure to dust and the elements.If the cover is punctured, ripped, torn, or otherwise leaves the lawn mower exposed, the cover should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This cover is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This is a replacement belt for self-propelled lawn and garden equipment. The belt is responsible for turning the axle that rotates the wheels when the self-propelled action is engaged. Over time, the belt can become worn with regular use. it should be replaced every season for optimal operation. There may also be instances where the belt breaks or becomes damaged and needs immediate replacement to avoid further damage. Without a working belt, the self-propelled function will not work. This genuine OEM v-belt is designed for use with a variety of 21-inch walk-behind lawn mowers and snow throwers. This belt is made of durable composite rubber material and reinforced for longer life with premium compression materials. Be careful when replacing belts and other tension parts as pinching and crushing injuries are common. Always allow the engine to cool and disengage the spark plug for safety.

This grass catcher frame holds the grass-catching bag, which captures grass clippings for compost or simply to remove yard waste. Bagging rather than mulching allows grass to get higher and thicker without putting added stress on the mower. The internal grass catchers frame can become bent and not suitable for further use, making it impossible to bag clippings until it is replaced. This OEM replacement handle is the answer for mowers made by these manufacturers: Bolens, Murray, Mastercut, Troy-Bilt, Yard Machines, Craftsman, Yard-Man, and Cub Cadet. This OEM part is sold individually.

This part is a replacement front wheel assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a worn or defective front wheel assembly in a variety of different lawn equipment models.Wheels are an essential part of moving lawn equipment as they enable mowers and tractors to be properly maneuvered and controlled. Wheels are a high wear and tear part and can easily become damaged, particularly when regularly used on rough terrain. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this front wheel assembly, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this front wheel assembly is suitable for use on several different models of lawnmowers and lawn tractors manufactured by MTD, Yard Man, and Cub Cadet. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Installing a brand-new air filter keeps the engine in top running condition. When the machine is in operation, the vacuumed air goes through the air filter. Any dirt or dust is left in the filter media. Over time, the filter will become dirty and can no longer provide the same filtering efficiency as before. If left ignored, the tiny particles could clog the engine and the carburetor. You may experience misfires and no engine start-up. An air filter replacement is cheap and easy to do. Simply remove the air cleaner cover and take out the dirty filter. Insert the new filter into the housing. This replacement will take less than 5 minutes. A screwdriver will be needed. The MTD 951-10298 Air Cleaner Kit is a genuine air filter from MTD. Each kit comes with one paper filter and one foam filter. The foam filter can be cleaned with water and detergent. The paper filter, however, needs replacement at least once a year. This air filter kit is compatible with Cub Cadet, PowerMore, and Troy-Bilt. It can also work with other garden equipment like wheel string trimmers, chipper-shredder vacuums, and log splitters.

Designed for comfortable mowing, this trail shield attaches to walk-behind lawnmowers. It secures to the back of the deck on the lawnmower and prevents grass and other debris from reaching the person using the mower. This trail shield is made of durable plastic but can become damaged use. If it is broken, it will not be able to keep grass from collecting behind the mower deck, so it will need to be replaced.To replace the part with a new shield, put the lawnmower on a stable surface and ensure it is powered off. On the original trail shield, find the metal clasps that hold it secure. Unclasp each of these and remove the trail shield from the lawnmower. The new replacement part can be attached and the lawnmower will operate correctly.This trail shield is an authentic OEM replacement part that is directly sourced from the manufacturer. It is an individual component and does not come with hardware. The part is compatible with lawnmowers by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Troy-Bilt, Huskee, Murray, MTC, and Yard Machines.

This replacement part is a hex bolt. It is a genuine replacement part made by MTD. Hex bolts are named because they are shaped like a hexagon and are different from the regular circle-shaped bolts. These parts are able to hold other parts secure and in place so that everything can operate as needed. A new hex bolt might be needed if the current ones are damaged in any way. It is possible that these bolts become stripped or lodged in place over time due to normal wear and tear and should be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous part is stuck. Be sure the engine is completely powered down before beginning this repair. This bolt is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

A side discharge chute is engineered to move the debris away from the machine's underside. This is because grass that is not only long and thick but also moist can get trapped and clog the deck and the blades. When this happens, you will have to stop to clear the accumulated clippings periodically. To mitigate clogging and maximize cutting, using a side discharge chute is ideal. When a side discharge chute is installed, but clogging still occurs, there might be a problem with the chute itself. It can be torn or already loose. Luckily, installing a brand-new side discharge chute is easy and will take less than 5 minutes. Start the installation by removing the spark plug. The engine should be cool to the touch. Then, lift and hold the mulch cover up. Take the brand-new side discharge chute and hook the tabs on to the hinge pins. Then, release the mulch cover. MTD manufactures this brand-new side discharge chute. It is an original replacement with Craftsman, MTD, Murray, Yard-Man, Yard Machines, Bolens, Huskee, and Mastercut lawnmowers. It comes in solid plastic material with a black finish. This side chute is sold individually.

A mulching blade has a unique curved or angled design that allows discharging, bagging, and mulching. If its edges are already dull, it can lead to longer mowing time and frayed and torn grass blades. Mulching blade installation is easy. First, unplug the spark plug wire. Then, position the lawnmower on its side. Get a woodblock, preferably 6 x 2 in size, and put it between the old blade and housing deck. Make sure that the wood will prevent the old blade from moving. Take a socket wrench and remove the blade’s nut and washer. Remove the old blade and put the new mulching blade in. Put the nut and washer back and tighten until it is secured. You can use the woodblock to prevent the replacement blade from moving when it is tightened. This mulching blade replacement s an original MTD product. This OEM mulching blade can be used for MTD, Craftsman, Cub Cadet, Murray, Yard-Man, and Bolens lawnmower models. This brand-new mulching blade is sold individually. The support blade and screw hex are sold separately.