Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
The fuel filter on lawnmowers and lawn tractors provides the engine with protection from contaminants that could be in the fuel. If the fuel picks up debris, the filter prevents this debris from causing engine damage. The fuel filter also keeps debris from entering the fuel tank during operation. Fuel filters should be changed on a regular basis to ensure the engine remains protected. If the engine begins backfiring or won't start, check the fuel filter to see if it is clogged.Empty the fuel tank before replacing the fuel filter on the equipment. Locate the fuel filter inside the fuel tank or in line with the fuel lines. Remove the old filter and dispose of it. Install the new filter and put fresh fuel back into the fuel tank. Start the engine and check to make sure fuel is flowing correctly to ensure the filter was put back in place. This fuel filter is an authentic OEM replacement part sourced from the manufacturer for use on lawnmowers and lawn tractors. It is sold individually. This fuel filter is designed for use on lawn mowers and lawn tractors manufactured by Jonsered, Craftsman, Toro, and Cub Cadet.
This is an oil filter that facilitates the removal of harmful contaminants from the engine oil. This part is designed to help maintain the optimum performance of an engine in compliance with the necessary EPA emissions regulations. It is recommended that the oil filter is replaced annually or every 100 hours. Remember to prepare something to catch the oil when replacing the oil filter. The old one will need to be unscrewed to replace it, but be sure to coat the seal of the new filter with oil before installing it. To ensure that the new oil filter is in place, make sure it touches the plate it seals against by giving the filter a firm turn to tighten it down. This replacement part is an individual genuine OEM part. It is compatible with small engines, lawnmowers, generators, snowblowers, and wood chippers from Toro, Lawn-Boy, Simplicity, Snapper, and Briggs & Stratton.
This part is discontinued by the manufacturer and is no longer available for purchase.
This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.
This authentic OEM replacement ball joint assembly is a part of the front suspension of a lawn tractor or riding mower. Suspensions are complex systems that include joints, bushings, and bearings that must all work together to turn and maintain contact with the ground. This ball joint assembly helps to connect all of these components. It works similarly to a human hip in that it has a joint and a ball that allows for pivot motions. The most common reason for a ball joint assembly to go bad is if it loses lubrication or becomes gritty. In order to work smoothly, these joints must stay well oiled or else they will grind and break. If the ball assembly breaks, use a wrench to disengage the wheel and change out the part. This is a fairly straightforward repair and should not take more than a few minutes. This replacement assembly is a high-quality part for Cub Cadet, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Bolens, Ryobi, and Yard Man machines. This part is sourced from the original parts manufacturer and ships individually.
The nut-hex flange 5/8-18 features a hex nut with a wide flanged portion at one end. This flange will act as an integrated washer that does not spin. Since the flange acts as a washer, it ensures that the nut can fasten to the material's surface evenly. If any of these nuts are removed from a machine to do other work, it is recommended to replace them with a new nut-hex flange. Check the nuts that are currently on the machine at least once a year. Make sure they are properly tightened and that they are in good condition. Replace them as needed. This OEM part will work for many types of equipment, including lawnmowers, edgers, snowblowers, and lawn tractors. The part will work with many brands, including Ryobi, Poulan, Bolens, Yard-Man, MTD, Yard Machines, and Troy-Bilt.