Parts for Yard-Man 13A2785S001 / 2013: .Quick Reference Parts

Throttle and choke cable for front-engine lawn tractors. Installs from control panel to carburetor. Replace if frayed, kinked, or damaged.

Replacement fuel cap for lawn tractors and riding mowers. Secures the fuel tank opening to prevent spills and debris entry. Order if cracked or missing.

Fix uneven cuts or poor grass mulching with this lawn tractor mower blade. Replaces damaged or dull blades that hit stumps or rocks. Direct fit repair.

Oil filter wrench tool for accessing and removing recessed oil filters in lawn mowers, garden tractors, and log splitters. Essential when standard tools can't reach.

Battery does NOT contain battery acid

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This is a two in one blade that can be used as a lift blade to bag clippings, as well as a side discharge for clippings. It is time to consider replacing this blade when there are uneven or even missed areas of cutting or bagging when using the mower. It may be that the blade has been dulled by prolonged use or bent or damaged by striking rocks and dense roots. Either way, replacing the blade is a relatively easy repair to make and should be considered a part of routine maintenance. The repair requires the use of the proper tools, including wrenches and sockets. An appropriate flange bolt may need to be purchased as well if the original has been damaged or worn. "This OEM replacement cutting blade works with more than 150 types of tractors and mowers made by Craftsman, Yard Machines, Yard-Man, MTD, and Troy Bilt. This ships singly and is a high-quality blade made of durable materials.

Blade removal tool for lawn mowers and garden tractors. Safely holds the blade in place during removal or installation. Replace if damaged or missing.

Ball joint assembly for lawn tractor front suspension steering. Replaces worn, damaged, or broken ball joints that affect wheel alignment and control.

Replace your lawn tractor's flange bearing if you notice wheel wobble, noise, or rough movement. Ensures smooth operation and extends equipment life.

Flange bearing for lawn tractors and riding mowers. Replace if you notice excessive noise, vibration, or wheel wobble. Verify fit with your model number.

5-inch diameter deck roller wheel for lawn tractors and riding mowers. Replaces cracked, worn, or missing deck wheels that support smooth cutting deck operation.

The cable seen here is an authentic replacement that is sourced from the manufacturer. This control cable is used for lawn mowers. It will pivot to pull the belt idler pulley, which will fasten the belt and spin the mower's cutting blades. When the cable is not working properly, it could mean that the blades will not spin properly and not provide the mower with the cutting capability that it should have. The cable that comes with the mower tends to be durable, but this does not mean that it will not need to be replaced at some point. Many things could happen to the cable that would require a replacement. The spring might start to wear out, for example. The cable could become frayed or corroded, as well. Owners should always make sure they are wearing gloves when replacing this part. They will need a screwdriver and pliers to complete the repair. The cable is a genuine OEM replacement part that is sold individually. This cable will work with more than 130 models of mowers. Brands with compatible models include Craftsman, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut.

Black ignition key for lawn tractors and riding mowers. Replace lost, broken, or worn ignition keys. Direct fit for starting your mower's engine.

Filters debris from fuel before it reaches the engine. Replace annually or when experiencing fuel flow issues. Confirm fit with your model number.

This air filter consists of an internal plastic frame with a foam mesh cover that captures dust and dirt. The outer, washable pad covers an accordion-style inner filter that removes even finer particles. An air filter keeps particles in the air from getting sucked into the motor, where friction will cause wear and tear to the engine. However, a filter has a limited life cycle. Eventually, it gets clogged up, which leads to limited airflow and decreased efficiency. If the engine is bogging down when it is revved up, a clogged air filter might be to blame. Simply install a new air filter and see if the motor performance improves. It is recommended to preemptively replace the air filter every spring so a clogged filter never puts a halt to a job in progress. This is an OEM part, sourced directly from MTD, and it is sold individually. In addition to MTD lawn equipment, it has also been used by other manufacturers, including Craftsman, Yard Machine, and Yard-Man.

Variable speed drive belt connects engine to transmission for lawn tractors and riding mowers. Replace if stretched, damaged, or broken. Verify fit with your model.

Removes contaminants from engine oil to protect internal parts. Replace regularly to maintain engine performance. Confirm fit with your model number.

Replaces a stripped, damaged, or missing 5/8" hex flange nut on your lawn mower or snow thrower. Secures blades and other components with integrated washer.

Spindle assembly for lawn tractor mower decks. Connects blade to drive belt for cutting operation. Replace if cracked, worn, or damaged bearings.