Parts for Broan 2736: Range Hood Parts

This bushing cushions and supports a range-hood motor shaft to restore smooth, quiet blower operation and reduce wear on rotating parts. It's a small replacement part used where the motor shaft passes through the housing. What it does:

• Centers and stabilizes the motor shaft to prevent wobble and vibration
• Reduces shaft-to-housing friction that can cause noise or premature wear
• Helps maintain proper blower alignment for consistent airflow
• Supports long-term motor and housing durability when installed correctly

• One bushing

• Disconnect power to the appliance before starting any repair
• Access the blower/motor housing; partial disassembly is usually required
• Inspect mating surfaces and replace any worn or damaged components at the same time
• Follow OEM instructions for placement; do not force the bushing into position

Fan or light not responding? Intermittent operation or loose controls? This range hood switch restores reliable on/off control. Simple DIY fix.

Fix intermittent operation, lights not working, or fan issues with this wire harness. Routes power between switches, lights, and motor. Easy install.

Replace worn or broken range hood control knobs to restore precise fan speed and light control. Direct-fit knob for compatible Broan models. Confirm fit.

Restore dependable control with this replacement switch. It replaces a worn or unresponsive control so your unit responds consistently when operated, helping eliminate intermittent operation and no-response issues caused by fatigued contacts or mechanical

Wire harness for range hood electrical connections. Replace if wires are damaged, frayed, burnt, or connectors are broken. Restores proper wiring.

Replacement mounting plate for range hood assemblies. Secures and covers internal components while providing a finished trim. Needed when original is cracked, broken, or missing.

Crank assembly for range hood vent systems. Replaces broken or worn crank mechanisms that control vent opening and closing. Direct fit replacement part.

Mounting spacer maintains proper clearance between range hood panels. Replace if original spacer is worn, missing, or broken to restore correct alignment.

Mounting bracket for range hood installations. Secures hood to wall or cabinet. Replace if bracket is bent, cracked, rusted, or missing hardware holes.

Mounting bracket for range hood installation. Securely attaches hood to wall or cabinet. Replace if bracket is bent, cracked, or missing hardware.

This is a factory replacement part for Broan appliances. Use it to restore original operation when a specific component has failed or is missing — helps get your range/ventilation unit working like it did before. What it does:

• Replaces a failed factory component to restore normal appliance function
• Can address symptoms such as loss of operation, intermittent operation, or abnormal noises when the missing/failed part is the cause
• Restores original fit where the OEM component is required for proper performance
• Preserves factory safety and operating characteristics when the correct part is installed

• Verify the part number on your appliance and that this is the correct replacement before installation
• Disconnect power (and gas if applicable) to the appliance before attempting any service
• Follow OEM service manual instructions for removal and installation; use appropriate tools and safety gear

Replacement cover panel for range hood exterior. Protects internal components and completes the appearance. Order if your original is cracked or missing.

Captures cooking vapors and airborne grease to protect your range hood blower. Replace when saturated or clogged to restore airflow and ventilation performance. Confirm fit by model number.

Fix a noisy, stalled, or non-starting range hood fan with a new blower motor. Powers the fan blade to move air through your ventilation system.

Replacement screw for range hood assembly. Secures panels, mounts, or internal components. Order a new screw if original is stripped, missing, or damaged.

Replacement support bracket for range hood installation. Secures and stabilizes your vent hood to the wall or cabinet. Order a new bracket if yours is bent, broken, or missing.

Mounting screw for range hood installation and assembly. Replace missing, stripped, or damaged screws to secure housing panels and components properly.

This is a genuine replacement mounting screw that secures range hood components and trim for reliable fit. Using the correct screw helps keep panels and assemblies fastened so vents and lights stay properly aligned. What it does

• Fastens trim, brackets or internal components to maintain proper alignment
• Prevents rattling or loose panels that can cause vibration or noise
• Restores a missing or stripped fastener so parts install securely
• Works where the factory-specified screw size and thread are required

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but avoid over-torquing which can damage threads or plastic parts
• Disconnect power and follow appliance safety instructions before servicing
• If threads are damaged, replace with the correct OEM fastener rather than forcing installation

Secure mounting nut for range hood installation. Replaces lost, stripped, or corroded nuts that hold your ventilation system in place during assembly.

Replacement bolt for range hood and vent system assemblies. Secures panels, covers, or mounting brackets. Order if original hardware is stripped or missing.

This strain relief secures and protects the appliance power cord where it enters the housing, helping prevent wire pull-out and chafing for safer, more reliable electrical connections. What it does

• Secures the power cord to the appliance to prevent accidental pull-out
• Protects wiring from abrasion where it passes through the cabinet or junction box
• Helps maintain a stable electrical connection and reduces intermittent power issues
• Commonly used where a flexible cord enters a range hood or ventilation blower housing

• Disconnect power to the appliance before starting any repair
• Access typically from the unit rear or inside the junction box; remove cover as required
• Insert cord and tighten clamp/nut until snug; avoid over-tightening which can damage the cord
• Inspect wiring and insulation; replace if damaged before reassembly

A simple replacement wire tie designed to secure wiring and small components inside range hoods and ventilation units, helping keep wires organized and away from moving parts or heat sources for safer operation. What it does:

• Bundles and secures wiring to prevent loose harnesses from rubbing or snagging
• Keeps wires routed away from fan blades, heating elements, and sharp edges
• Reduces vibration-related wear on wire insulation and connectors
• Helps maintain a neat internal layout for easier future service

• One wire tie

• Use pliers or a cable-tie tool to tighten; trim excess tail flush with the locking head
• Inspect surrounding wiring for damage before securing; replace damaged wires or insulation first
• Avoid overtightening; cable ties should hold firmly without cutting into wire insulation
• Disconnect power to the appliance before accessing internal components