Parts for Ge JV665H2CC: 01 - Range Hood Parts

This motor/lamp switch is the user control for many GE range hoods. It turns the fan motor and hood light on and off, restoring reliable control when the original switch becomes worn, intermittent, or sticks.

• Provides on/off control for either the hood fan motor or the hood light, depending on model location
• Common symptoms: fan or light won't turn on, stays on, intermittent operation, or a loose/sticky rocker
• Restores reliable, positive switching of the selected circuit
• Direct-fit replacement designed for the original switch footprint

• Disconnect power at the breaker before servicing
• Remove filters and the control/trim panel to access the switch (procedure varies by model)
• Photograph or label wire positions; transfer one lead at a time to the new switch
• Seat the switch fully in its bracket, reassemble, restore power, and test operation

This lamp switch controls power to the appliance's light circuit. It turns the light on and off via the door mechanism or controls, restoring visibility inside the cavity and fixing issues like a light that won't turn on or off. What it does

• Controls the on/off function of the lamp circuit
• Activates or deactivates the light with the door or control input (as designed for the model)
• Common fix for a light that won't turn on, stays on continuously, or works intermittently
• Replaces a switch with worn, stuck, or inconsistent contacts

• 1 lamp switch

• Disconnect power before servicing; if working on a microwave, be aware of high-voltage components
• Access is typically behind the control panel or latch area; remove mounting screws/panels as needed
• Note wire positions (COM/NO/NC) and transfer one at a time to the new switch
• Verify switch orientation, secure in bracket, and test light operation before reassembly

This is a blower motor assembly intended for use with range hood fans. The blower motor assembly powers the fan that circulates air over the stove. With use, the blower motor assembly may malfunction or fail. When this part becomes damaged or stops functioning correctly, a replacement part is required to continue the effective use of the fan in the range hood.Signs that the blower motor assembly needs to be replaced include a fan that doesn't turn on or a fan that makes unusual sounds when operating. The replacement of the blower motor assembly is simple. Disconnect the range from its power source before starting the disassembly of the appliance. Wear gloves for protection. A screwdriver and a nut driver are necessary to complete the repair. The blower motor assembly is located inside the range hood. Lower the fan unit, disconnect the old blower motor and connect wires to the new motor for installation.This blower motor assembly is a genuine OEM replacement part. It is sold as an individual piece. The blower motor assembly is made of durable materials. It can be installed in several different models of ranges. The blower motor assembly is compatible with appliances produced by General Electric, RCA, and Hotpoint.

NON-DUCT FILTER KIT 36IN

The 36" Filter is an OEM replacement part for GE range hoods and ventilation systems. It is designed to capture and remove grease, smoke, and odors from the air, ensuring a clean and fresh kitchen environment.

Symptoms of a clogged or faulty range hood filter include:

• Reduced airflow and poor ventilation performance
• Visible buildup of grease or residue on the filter surface
• Strong cooking odors lingering in the kitchen

Causes of a bad filter can range from normal accumulation of grease and grime over time, exposure to high heat or humidity, or physical damage from improper cleaning or handling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore range hood models.