Parts for Frigidaire FGBC5334VS: Recommended Spares Parts

This is a set of two hinge bearings designed for the top hinge assembly of a refrigerator door. The bearings reduce friction and allow the door to pivot smoothly when opening and closing. Replace these bearings if the refrigerator door squeaks, feels stiff, doesn't align properly, or if the existing bearings are cracked or worn.

Door stop for wine and beverage coolers. Prevents door from over-opening and protects hinges. Replace if broken, cracked, or missing for proper operation.

This is a genuine replacement mounting screw designed to secure appliance panels and small components. Installing the correct screw restores proper fit and reduces rattling or loose parts for safe, reliable operation. What it does:

• Secures panels, brackets, or small components to the appliance chassis
• Restores proper alignment and fit where a screw is missing or damaged
• Helps stop rattling, vibration, or loose parts caused by a stripped or lost fastener
• Simple, direct replacement when the original screw is worn or corroded

• Use the matching screwdriver or bit to avoid stripping the head
• Power off and unplug the appliance before accessing internal panels
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Replace with the exact fastener type and length shown in your appliance's parts list

This door stop is the replacement bumper that limits refrigerator door travel and cushions contact to prevent damage and noise. Restores proper door stop action so the door closes smoothly and avoids hitting adjacent surfaces. What it does:

• Cushions the door at its travel limit to reduce noise and prevent cabinet or door-edge damage
• Holds the door at the correct stopping point to keep proper alignment during opening/closing
• Helps prevent the door from swinging past its intended range and stressing hinges
• Common symptom: door slams, catches, or goes past its normal stop

• One replacement door stop

• Disconnect power or unplug the appliance before starting when working near electrical components
• Installation typically requires removing the hinge or accessing the hinge area—support the door to prevent it from falling
• Use basic hand tools and follow OEM instructions; do not force parts—inspect hinge and mounting area for damage

Replacement door handle for wine and beverage coolers. Restores safe, easy grip when original handle is cracked, broken, or worn. Matches factory mounting.

This is a push-button switch located on the control panel that controls the interior light of the wine cooler. It activates or deactivates the light when pressed, typically when the door is opened or closed. Replace this switch if the interior light stays on constantly, does not turn on at all, or the button feels stuck or unresponsive.

This oven front grill is a replacement trim piece that restores the oven's finished appearance and covers the top edge of the control/door area. It keeps the front of the range looking complete and helps protect internal edges from spills. What it does

• Covers and protects the upper front edge of the oven/control area
• Restores the oven's factory appearance after damage or loss
• Helps prevent debris from entering gaps behind the control panel or door
• Commonly replaced when the grill is cracked, bent, or cosmetically worn

• One oven front grill

• Disconnect power to the appliance before beginning any work
• Removal may require loosening adjacent trim screws or fasteners—keep hardware for reinstallation
• Handle carefully to avoid scratching the finish; wear gloves if needed

Fixing ice buildup in your freezer? The defrost sensor monitors temperature and triggers defrost cycles to prevent frost accumulation in your refrigerator.

This thermistor cover is the protective housing that shields the refrigerator's temperature sensor from drafts and moisture, helping the sensor read air temperature more reliably for steadier cooling control. What it does

• Protects the thermistor/sensor from direct air drafts, moisture, and physical contact
• Helps the sensor register ambient temperature more consistently for accurate cycling
• Can reduce temperature swings or short-cycling caused by exposed sensor readings
• Useful when sensor readings are erratic, interior temperature seems inconsistent, or starts/stops feel abnormal

• Unplug the appliance or shut power to the circuit before servicing
• Remove only the interior paneling or trim necessary to access the sensor; keep fasteners organized
• Handle the thermistor/sensor carefully — avoid pulling on wiring or applying pressure to the sensor element
• If the cover is clipped in place, ensure proper alignment and secure fit; do not force or glue parts unless specified by the manufacturer

This is a set of four rubber gaskets designed to mount around the fan motor inside a wine cooler. They provide a vibration-dampening seal between the fan motor and the cooler housing, reducing noise and preventing air leaks. Replace these gaskets if you notice increased vibration, rattling noises from the fan area, or if the originals have become brittle or deteriorated.

Wine cooler not cooling evenly or running warm? This evaporator fan motor circulates cold air to maintain consistent temperatures in all compartments.

Wine cooler not cooling or buttons unresponsive? This control assembly regulates temperature settings and display functions. Moderate DIY repair.

Replace your wine cooler's interior light bulb to restore visibility. Install when bulb burns out or flickers. Verify fit with your model number.

Enables wine cooler door to pivot smoothly and stay aligned. Replace when door sags, rubs, or won't close securely. Confirm fit with your model number.

Replace a worn upper right door hinge to restore smooth door operation and proper alignment on your wine or beverage cooler. Confirm fit with your model.

Control panel not responding or display blank? This electronic control board restores user controls and system functions. Intermediate DIY repair.

Replacement tray for wine and beverage coolers. Installs inside cabinet to hold bottles and cans. Order when original is cracked, warped, or missing.

Power cord for upright freezers and wine coolers. Replace if your original cord is damaged, frayed, cracked, or missing. Ensures safe electrical connection.

Base panel for wine and beverage coolers. Covers the bottom exterior of your unit. Replace if cracked, damaged, or missing to restore appearance.

Leveling leg for wine and beverage coolers. Installs at the base to stabilize and adjust height. Replace if cracked, broken, or missing.

If your wine cooler has uneven temperatures or warm spots, the fan motor may have failed. This motor circulates air to maintain consistent cooling.

Fix loose panels or unusual noises in your wine cooler with this support mounting bracket. Secures internal components to reduce movement and wear.

This metal refrigerator door hinge mounts the door to the cabinet and lets the door pivot smoothly so it opens, closes and seals correctly. Replaces a worn, bent or damaged hinge to restore proper door alignment and operation. What it does:

• Secures the refrigerator door to the cabinet while allowing controlled pivot movement
• Keeps the door aligned so the gasket seals fully and cold air stays inside
• Stops door sag, binding, or uneven gaps caused by a damaged hinge
• Works with factory mounting locations and hardware to maintain original fit

• One metal door hinge

• Unplug or disconnect power to the appliance before starting any repair
• Remove food and shelves from the door and support the door while loosening hinge fasteners
• Use appropriate hand tools; avoid forcing parts — tighten fasteners to secure fit without over-torquing
• After installation, check door alignment and gasket contact; adjust hinge position as needed

Replaces cracked, broken, or missing glass shelf in your wine or beverage cooler. Restores stable storage space for bottles and beverages.