Parts for Bosch B22CS50SNB/01: Refrig Door Parts

The Active Carbon Filter is an OEM part for Bosch refrigerators. This filter helps reduce odor-causing substances inside the refrigerator for fresher preserved food. It traps molecular impurities through an advanced filtration process.

Causes of a filter requiring replacement include normal lifespan expiration as indicated on the packaging. For optimal results, these filters should be replaced according to manufacturer guidelines.

Symptoms of a spent filter include:

• Return of odors to the refrigerator interior
• Potential taste transfers between strong smelling foods
• Reduced effectiveness of the odor reduction system

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement utensil tray holds silverware and small kitchen tools in the dishwasher, keeping items separated for better cleaning and preventing nesting. It restores secure, organized loading for consistent wash results. What it does:

• Provides a dedicated space for forks, knives and spoons to keep items upright and separated
• Helps prevent flatware from nesting so water and detergent reach all surfaces
• Fits into the dishwasher rack to stabilize small items during the wash cycle
• Reduces movement and rattling of utensils while the dishwasher runs

• Slide or clip the tray into the designated position in the dishwasher rack; no tools typically required
• Inspect for wear or broken clips and replace the rack or mounting hardware if needed
• For safety, disconnect power to the appliance before attempting repairs that require moving the rack assembly

This factory replacement tray restores the intended fit and function in your appliance. It provides a stable surface/collection area as designed by the manufacturer, helping items sit securely and containing minor drips or debris in the designated location. What it does

• Provides a stable, model-specific surface or collection area inside the appliance
• Helps contain small spills, drips, or debris where the tray sits
• Maintains proper support and spacing for items in that section
• Replaces a cracked, warped, stained, or missing original tray

• 1 tray

• Disconnect power and, if applicable, shut off water before servicing
• Compare the new tray to the original to match/orientation before installation
• Clean the area so the tray seats flat and secure
• Ensure any tabs or guides are fully engaged and stable fit before use

This door seal fits around the dishwasher tub opening to keep water and steam inside during cycles. Replacing a worn gasket restores a tight seal so the door latches properly and helps prevent leaks at the sides or bottom.

• Creates a watertight barrier between the door and tub during wash and rinse cycles
• Helps contain steam and reduce moisture escaping from the front of the unit
• Replaces a flattened, cracked, torn, or deformed seal that can cause leaks
• Common symptoms include drips at the front edge, water on the floor near the door, and needing extra force to latch

• Disconnect power and, if applicable, shut off the water supply before servicing
• Pull the old seal from the channel; clean the groove and mating surfaces thoroughly
• Press the new seal in evenly without stretching; seat corners fully and position the joint at the bottom center
• Close the door to help the seal set; a snug fit at first is normal

This support mounting bracket reinforces and secures appliance components to reduce movement and maintain proper alignment during use. It restores stable mounting for parts that have loosened, shifted, or rattled. What it does:

• Provides a stable mounting point to hold panels, assemblies, or housings in place
• Prevents vibration and noise caused by loose or sagging components
• Keeps moving parts aligned to help ensure smooth operation
• Replaces worn, cracked, or broken supports that allow parts to shift

• Intended for users comfortable disassembling appliance panels; disconnect power and water before starting
• Verify orientation and fastener locations match your appliance before tightening
• Use existing screws or fasteners unless replacement fasteners are specified by the manufacturer

A replacement hinge pivot bearing that supports the dishwasher door for smoother, quieter opening and proper alignment. Fits into the door hinge assembly to reduce binding and wear for reliable door operation. What it does

• Supports the door hinge pivot so the door opens and closes smoothly.
• Reduces friction and wear on the hinge, helping prevent sagging or misalignment.
• Stops squeaks, sticking, or rough movement caused by a worn bearing.
• Works as a direct replacement for the corresponding hinge bearing in the door assembly.

• Disconnect power to the appliance and shut off water before starting any repair.
• Support the door while removing hinge fasteners to prevent the door from dropping.
• Access typically requires removing the lower toe panel or inner door trim—use basic hand tools.
• Inspect hinge components and nearby parts for wear; replace any damaged hardware and test door alignment after installation.

This replacement tray restores a clean, secure surface inside your appliance. Replace a cracked, warped, or missing tray to keep items supported and minor drips or crumbs contained so your unit looks tidy and works as intended.

• Provides the designed support/catch surface within the appliance compartment
• Helps contain small spills, drips, or debris depending on location and design
• Restores proper fit and appearance when the original is cracked, warped, stained, or missing
• Can help address wobbling items, poor seating, or leaks originating from a damaged tray area

• Disconnect power; if the appliance is plumbed, turn off the water supply before starting
• Remove the damaged tray and transfer any reusable inserts or mats if applicable
• Align with guides/tabs and slide or snap into place without forcing
• Verify level seating and smooth operation before restoring power and use

This replacement tray restores a clean, secure surface inside your appliance. Replace a cracked, warped, or missing tray to keep items supported and minor drips or crumbs contained so your unit looks tidy and works as intended.

• Provides the designed support/catch surface within the appliance compartment
• Helps contain small spills, drips, or debris depending on location and design
• Restores proper fit and appearance when the original is cracked, warped, stained, or missing
• Can help address wobbling items, poor seating, or leaks originating from a damaged tray area

• Disconnect power; if the appliance is plumbed, turn off the water supply before starting
• Remove the damaged tray and transfer any reusable inserts or mats if applicable
• Align with guides/tabs and slide or snap into place without forcing
• Verify level seating and smooth operation before restoring power and use

This replacement tray is a removable cutlery and utensil insert that helps organize silverware for thorough cleaning and easy unloading. Fits into the dishwasher's rack to keep items separated and positioned during a wash cycle. What it does:

• Holds forks, knives, spoons and small utensils securely in the rack so water reaches all surfaces
• Prevents items from nesting together for improved cleaning performance
• Keeps sharp utensils contained for safer loading and unloading
• Helps reduce movement and noise of loose utensils during a cycle

• One replacement tray/utensil insert

• Place the tray into the designated slot or area in the dishwasher rack until it snaps or rests securely
• Ensure utensils are placed handle-down when recommended by your dishwasher manual to avoid blocking spray arms
• Do not force the tray into place; check alignment with rack guides to prevent damage
• Disconnect power to the appliance before attempting any repairs that require disassembly beyond removing the tray

This replacement cutlery tray fits into the dishwasher's third rack to organize and secure silverware and small items for better cleaning and to prevent nesting or damage during cycles. What it does:

• Provides a dedicated area to lay forks, knives and spoons flat so water reaches all surfaces
• Helps prevent utensils from falling through or clumping together during a wash
• Maintains proper spacing to improve wash performance for small items
• Replaces a cracked, warped or missing third-rack tray that can allow items to shift or block spray

• Remove and reinstall on the third-rack rails; no tools typically required
• Ensure tray locks or rests fully in the rack before running the dishwasher
• Inspect for broken tabs or sharp edges and handle carefully to avoid cuts
• Disconnect power and your dishwasher's user manual or parts diagram about placement

This support mounting bracket secures internal components to the appliance chassis, restoring proper alignment and reducing vibration. Use this direct-fit support to replace damaged or broken brackets that no longer hold components firmly. What it does:

• Provides a secure mounting point for interior panels or assemblies to prevent sagging and misalignment
• Reduces noise and vibration caused by loose or unsupported parts
• Restores correct spacing so moving parts operate without interference
• Helps prevent further wear or damage to adjacent parts caused by improper support

• One support mounting bracket

• Inspect surrounding parts and mounting hardware; replace any stripped screws or broken clips
• Tighten to manufacturer torque where specified; avoid over-tightening to prevent cracking
• Disconnect power and water before accessing internal components