Parts for Thermador T36BT71FSE: Refrig Shelfs Parts

This active carbon filter refreshes the air when your range hood is set to recirculate. Replace a saturated filter to restore effective odor reduction and maintain a more comfortable cooking space. What it does:

• Adsorbs cooking odors in recirculating operation
• Helps maintain fresher indoor air when venting back into the room
• Restores odor-removal performance when the old filter is saturated
• Typical signs it's time to replace: persistent cooking smells or diminished odor reduction

• One activated carbon filter

• Disconnect power to the hood before servicing
• Remove the metal grease filter(s) to access the charcoal filter
• Release the old filter from its clips/bayonet mount and install the new filter in the same orientation until it locks
• Charcoal filters are not washable; replace when saturated

• For hoods configured for recirculation; not used when vented to the outdoors

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Spindle is an OEM replacement part for Bosch refrigerators. It rotates shelf tracks, glide systems, and adjustable organizers for customizable storage throughout the interior. Smooth spinning allows for simple organizational changes as needs evolve.  

Symptoms of a bad spindle typically include jamming, binding, or grinding noises heard while maneuvering shelves and accessories. Mineral buildup from water deposits poses risks to spindle function over time. 

Causes of a bad spindle include:

• Spindles are difficult or impossible to turn freely  
• Jammed accessories that spin but do not change position
• Corrosion visible on components from water damage
• Mounting brackets or bushings stripped or degraded

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This rack rail guides the lower dishwasher rack smoothly in and out, restoring proper rack movement and alignment for reliable loading and unloading. It replaces a worn, bent, or broken slide rail to reduce sticking and mis-tracking. What it does:

• Guides and supports the lower dish rack so it slides smoothly on the dishwasher track
• Replaces damaged or bent rail that causes the rack to stick, bind, or wobble
• Helps keep the rack aligned to prevent dishes from tipping or not seating properly
• Works with the rack rollers/tires and end stops to ensure consistent movement

• One rack rail

• Intended to be installed by someone comfortable with basic appliance repairs; disconnect power and water before beginning
• Remove the lower rack and any end caps/fasteners holding the old rail; align and snap or fasten the new rail per the OEM layout
• Keep small clips and screws secured during reassembly; test rack movement before returning the dishwasher to service

This cover is a replacement protective housing that helps shield internal components from debris and moisture, preserving appliance operation and extending component life. It restores the original protective barrier when a worn or damaged cover is replaced. What it does:

• Protects internal parts from spills, dust, and physical contact
• Helps maintain proper airflow and component spacing
• Reduces risk of short circuits by shielding electrical components
• Can resolve symptoms like visible damage, gaps, or exposed parts

• One replacement cover

• Disconnect power and water before beginning any repair
• Inspect surrounding components and mounting clips for damage before installing
• Align cover with mounting tabs and secure using original fasteners; do not overtighten

A small retaining clip that fastens a component or panel in place inside your appliance. Replacing a broken or missing clip restores a secure fit so parts stay aligned and don't rattle during operation.

• Holds a mating piece, trim, or cover securely in position
• Helps prevent vibration-related looseness, gaps, and rattling
• Restores proper fit when the original clip is cracked, bent, or missing
• Common signs: loose or wobbly part, misalignment, visible damaged/missing clip

• Disconnect power; shut off water or gas supply
• Note the original clip's orientation; take a photo before removal
• Use needle-nose pliers to release/install; avoid prying on brittle plastics
• Press until fully seated and verify secure engagement before reassembly

This replacement glass plate restores a clean, sturdy surface inside your appliance so dishes and food sit level and are easy to clean. It's a direct-fit replacement where the original glass shelf or plate is cracked, chipped, or missing. What it does:

• Provides a stable, flat surface for cookware, dishes, and food
• Replaces cracked, chipped, or broken glass that can create safety hazards
• Keeps the interior tidy and simplifies cleanup by providing a smooth, non-porous surface
• Helps restore proper spacing and support for items that rely on the glass shelf/plate

• One glass plate

• Handle carefully; glass can chip or break—use gloves and protective eyewear
• If used in a microwave, disconnect power before inspecting or replacing parts

This small replacement clip secures a hose, wire or small appliance assembly so parts stay in place and operate reliably. It restores proper routing and prevents rubbing or disconnection that can cause noise or leaks. What it does:

• Holds hoses, wiring or small components in the correct position to prevent chafing or strain
• Keeps parts seated during normal use and vibration
• Helps maintain proper flow paths and clearances to avoid interference
• Reduces rattling or movement that can lead to wear or disconnection

• One replacement clip

• Designed for straightforward snap-in replacement; no special tools typically required
• Power off and disconnect the appliance before starting any repair
• Verify orientation and fit before fully seating the clip to avoid damage
• If the original clip is brittle or broken, inspect adjacent parts for wear and replace as needed

This glass turntable plate replaces a cracked or missing rotating tray to restore even cooking and safe food support. Durable tempered glass designed to sit on the microwave turntable support ring. What it does

• Provides a stable surface for plates and bowls during microwave cooking
• Helps promote even heating by rotating food while cooking
• Replaces chipped, cracked, or broken turntable glass that may rattle or not rotate properly
• Fits onto the turntable support/roller ring and spins with the drive coupling

• Handle with care; tempered glass can shatter if dropped or struck
• Ensure the turntable support ring and drive coupling are aligned and clean before installing
• Do not use if plate is cracked; replace immediately to avoid injury or damage

Note: Kit of 2 rails

This replacement fixture restores the original mounting support used in select Bosch appliances, helping secure internal components for reliable operation and fit. Use this part when worn or damaged mounting hardware causes loose or misaligned assemblies. What it does:

• Provides a secure mounting point to hold internal appliance components in place
• Prevents movement or vibration that can cause noise, rubbing, or improper operation
• Restores correct alignment of the attached assembly for proper function
• Helps stop intermittent contact or mechanical binding caused by a broken fixture

• One replacement fixture

• Disconnect power and water before starting any repair
• Follow OEM disassembly steps for access; some panels or components may need to be removed
• Use proper tools and avoid over-tightening fasteners to prevent damage

This glass plate is the microwave turntable that supports and rotates dishes for even cooking. It replaces a cracked, chipped or missing turntable to restore stable, even heating. What it does

• Provides a stable surface for plates and bowls while the microwave rotates them
• Helps food cook evenly by enabling proper rotation during operation
• Replaces broken, chipped or missing glass that can cause wobbling or poor contact
• Restores proper alignment so the drive coupling can engage the plate

• One glass turntable plate

• Unplug or disconnect power to the microwave before servicing
• Handle with care to avoid chipping; support the plate from beneath when removing or installing
• Do not use a cracked or chipped plate; replace immediately to avoid injury or further damage

This glass plate is the microwave turntable that supports and rotates dishes for even cooking. It replaces a cracked, chipped or missing turntable to restore stable, even heating. What it does

• Provides a stable surface for plates and bowls while the microwave rotates them
• Helps food cook evenly by enabling proper rotation during operation
• Replaces broken, chipped or missing glass that can cause wobbling or poor contact
• Restores proper alignment so the drive coupling can engage the plate

• One glass turntable plate

• Unplug or disconnect power to the microwave before servicing
• Handle with care to avoid chipping; support the plate from beneath when removing or installing
• Do not use a cracked or chipped plate; replace immediately to avoid injury or further damage