Parts for Ge GCE06GSHCSB: Refrigerator Parts

This upper hinge cover is a molded trim piece that snaps over the refrigerator's top door hinge to protect the hinge, hide hardware and restore a finished appearance. It replaces cracked, broken or missing hinge trim for a cleaner door look. What it does:

• Covers and protects the top door hinge from dirt and damage
• Conceals hinge screws and hardware for a finished appearance
• Helps prevent snagging or sharp edges from a damaged hinge area
• Commonly replaced when the cover is cracked, split or missing

• One upper hinge cover

• Disconnect power to the appliance before starting any repairs when required by the appliance manufacturer
• Support or secure the door before removing hinge fasteners to prevent tipping or injury
• Remove hinge screws, replace the cover, then reassemble and verify door alignment
• Use basic hand tools; keep existing hinge hardware unless explicitly specified otherwise

Insulating seal for compact refrigerator doors that prevents air exchange between compartments. Replace when torn, cracked, or not sealing properly. Verify fit with your model number before ordering.

This is a complete refrigerator door assembly that serves as the main access panel for the refrigerator compartment. It includes the outer door shell and provides insulation to maintain proper internal temperatures. Replace this door if it is dented, warped, has a broken seal surface, or no longer closes properly, which can cause temperature fluctuations and increased energy consumption.

Restores interior lighting in your refrigerator so you can see contents clearly. Replace when bulb burns out or flickers. Verify fit with your model number.

This lamp socket connects the oven or appliance light bulb to the wiring harness so the interior light powers on safely and reliably. It replaces a cracked, loose, or burned socket to restore proper bulb contact and illumination. What it does:

• Holds the appliance light bulb and provides the electrical connection to power the lamp
• Restores steady bulb contact when the light flickers or works intermittently
• Replaces sockets that are cracked, melted, or have burned contacts
• Helps prevent arcing or poor connection that can cause bulb failure

• Disconnect power to the appliance before servicing to avoid shock
• Handle bulbs and glass components carefully; let recently used bulbs cool before removal
• Inspect wiring and connectors for damage; replace or repair wiring if needed
• Use appropriate replacement bulb type and wattage as specified by the appliance manufacturer

Refrigerator not cooling properly or running constantly? This thermostat control box regulates temperature cycles. Moderate difficulty repair in 1-2 hours.

Refrigerator not cooling properly or running constantly? This thermostat controls compressor cycling to maintain stable temperatures. Moderate DIY repair.

This is a control knob that attaches to the cold control thermostat inside the refrigerator, allowing you to adjust the temperature setting. It typically mounts on the thermostat shaft inside the fresh food compartment. Replace this knob if it is cracked, broken, or no longer grips the thermostat shaft properly, making it difficult to change the temperature.

This lamp shade is the glass light cover that protects and diffuses the appliance light bulb, restoring even interior lighting and keeping the bulb shielded from spills or debris. It replaces a cracked, chipped or missing light cover. What it does:

• Protects the interior light bulb from contact with food, moisture and debris
• Diffuses and softens the appliance light for more even illumination
• Stops rattling or loose fit when the original shade is broken or worn
• Helps prevent direct bulb exposure that can lead to faster bulb soiling

• One lamp shade / light cover

• Ensure the appliance is powered off and bulb is cool before handling
• Handle the glass carefully; wear gloves to prevent cuts and fingerprints
• Seat the shade into its mounting position and secure per the appliance's original clips or retaining hardware
• Use only the correct replacement bulb and do not force the shade into place

Replaces a cracked, broken, or missing evaporator door flap in your refrigerator. Controls airflow from the evaporator to maintain stable temperatures.

Drip tray for compact refrigerators. Collects condensation beneath the unit. Replace if cracked, warped, or missing to prevent water leakage.

Replacement glass shelf for refrigerator fresh food compartment. Replace if cracked, broken, or missing. Fully assembled with frame, ready to install.

Tempered glass shelf that replaces a cracked, chipped, or broken refrigerator shelf. Fits into factory shelf rails to restore usable storage space.

Replace your cracked, broken, or missing refrigerator crisper drawer. Durable plastic drawer installs in the lower storage area to organize produce.

Right-side leveling leg for refrigerators. Installs at the front or rear corner to adjust height and stability. Replace if cracked, broken, or missing.

Left leveling leg for refrigerators. Supports and levels your appliance for proper door alignment. Replace if cracked, broken, or missing.

Replaces broken or loose door shelf bar on your refrigerator. Secures bottles and jars on door shelves. Durable molded plastic prevents items from shifting.

Replace the door shelf retainer bar in your refrigerator. Secures items on door bins. Order a new one if your original bar is cracked, broken, or missing.

Door shelf bar for compact refrigerators. Secures door bins and shelves in place. Replace if cracked, broken, or missing to restore door storage function.

Retainer bar secures items on refrigerator door shelf. Replaces broken, cracked, or missing bars that no longer hold bottles and condiments in place.

Plastic door stop that prevents the refrigerator door from overextending. Replace if cracked, broken, or missing to protect door hinges and cabinet.

A replacement screw used to secure appliance panels, trims, or components so parts stay aligned and stable. Installs quickly with a matching driver to restore proper fit and reduce vibration or rattling caused by loose fasteners. What it does:

• Fastens panels, trim pieces, brackets or small components in place
• Restores proper alignment and prevents rattling or vibration
• Replaces missing, stripped, or damaged screws that cause loose parts
• Works where the OEM screw size and thread match the original mounting point

• Screw

• Verify this screw matches the original in length, head style and thread before installing
• Disconnect power and remove any obstructing parts before working on the appliance
• Use the correct driver and turn carefully to avoid stripping the head or threads
• Do not overtighten; snug until secure to avoid damaging parts

Washer for compact refrigerators. This small spacer component fits between parts to prevent wear or ensure proper alignment. Replace if missing or damaged.

This sealed component removes moisture and contaminants from the R600 refrigerant system, typically located in the sealed system behind the refrigerator. Replace if the refrigerator isn't cooling properly, runs constantly, or if a technician identifies refrigerant system contamination.

Fix uneven cooling or warm fridge with this evaporator fan motor. Restores airflow through freezer compartment when original motor fails. Direct replacement.

Mounting bracket that secures the evaporator or condenser fan assembly in your refrigerator. Replace if cracked, broken, or missing to restore proper support.

Fix warm refrigerator or excessive frost buildup with this evaporator fan motor. Direct-fit replacement part restores proper air circulation.

Fix a compact refrigerator that won't cool or makes clicking sounds with this PTC relay. Common fix for compressor start issues. Basic repair in 15-30 minutes.

If your compact refrigerator won't start or stops running after a few seconds, the compressor overload protector may have failed. Moderate DIY repair.

This PTC cover is the protective shroud that fits over a PTC thermistor/starting device to help keep the sensor assembly secure and shielded from debris and contact. It preserves reliable operation by protecting the component. What it does:

• Protects the PTC thermistor/assembly from physical damage and debris
• Helps retain proper sensor position and alignment for consistent operation
• Reduces risk of accidental contact with the thermistor or wiring
• Can prevent intermittent operation caused by a loose or damaged cover

• Disconnect power to the appliance before beginning any repair
• Access may require removing outer panels or an access cover; follow OEM service manual steps
• Handle the PTC thermistor and wiring carefully to avoid damage
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners

Fix cooling issues in your refrigerator with this process valve. Regulates refrigerant flow for proper temperature control. Red cap design for R600 systems.