Parts for Ge GCE06GGHCBB: Refrigerator Parts

This upper hinge cover is a molded trim piece that snaps over the refrigerator's top door hinge to protect the hinge, hide hardware and restore a finished appearance. It replaces cracked, broken or missing hinge trim for a cleaner door look. What it does:

• Covers and protects the top door hinge from dirt and damage
• Conceals hinge screws and hardware for a finished appearance
• Helps prevent snagging or sharp edges from a damaged hinge area
• Commonly replaced when the cover is cracked, split or missing

• One upper hinge cover

• Disconnect power to the appliance before starting any repairs when required by the appliance manufacturer
• Support or secure the door before removing hinge fasteners to prevent tipping or injury
• Remove hinge screws, replace the cover, then reassemble and verify door alignment
• Use basic hand tools; keep existing hinge hardware unless explicitly specified otherwise

The Door Gasket is an OEM part for GE refrigerators. It forms an insulating seal around the entire refrigerator door frame. 

The gasket helps maintain separate interiors in the fresh food and freezer compartments by preventing air exchange between them. It contributes to energy efficiency by blocking heat transfer that could raise temperature levels inside the fridge. 

Causes of a bad door gasket can include cracking, tear damage, or dryness from sun exposure over time. Improper closing of the door could also lead to unintended gaps.

Symptoms of a bad door gasket include:

• Higher electricity bills from the refrigerator working overtime 
• Frozen items melting in the freezer or fresh food frosting
• Unpleasant odors transferring between compartments  
• Moisture buildup inside refrigerator surfaces

This authentic GE replacement gasket is also compatible with Hotpoint, RCA, and select Kenmore models for a precision fit.

This lamp socket connects the oven or appliance light bulb to the wiring harness so the interior light powers on safely and reliably. It replaces a cracked, loose, or burned socket to restore proper bulb contact and illumination. What it does:

• Holds the appliance light bulb and provides the electrical connection to power the lamp
• Restores steady bulb contact when the light flickers or works intermittently
• Replaces sockets that are cracked, melted, or have burned contacts
• Helps prevent arcing or poor connection that can cause bulb failure

• Disconnect power to the appliance before servicing to avoid shock
• Handle bulbs and glass components carefully; let recently used bulbs cool before removal
• Inspect wiring and connectors for damage; replace or repair wiring if needed
• Use appropriate replacement bulb type and wattage as specified by the appliance manufacturer

This thermostat controls refrigerator temperature by cycling the compressor and fans to keep food cold. Replaces a faulty or intermittent temperature control to restore stable cooling and proper cycle operation. What it does:

• Senses cabinet/freezer temperature and signals the compressor and evaporator fan to run or stop
• Can cause the appliance to run constantly, not cool, or cycle improperly when failing
• Works with mechanical temperature-control systems that use a sensing element
• Matches OEM function for direct replacement of the factory temperature control

• Disconnect power to the appliance before starting any repair
• Verify the old thermostat location and mounting; transfer any brackets or wiring harnesses if needed
• Avoid kinking or damaging the sensing element/capillary during removal and installation
• Test for proper operation after installation and restore all panels before returning power

This control knob replaces a worn, broken or missing range/oven temperature or function knob so you can safely and accurately set burner and oven controls. Designed to restore a secure grip and clear position indication. What it does

• Fits onto the stove or oven control shaft to select burner heat or oven settings.
• Restores a solid grip and clear pointer for accurate temperature and function selection.
• Commonly used when knobs are cracked, stripped, loose, or completely missing.
• Works with standard push-on control shafts; does not include internal switch components.

• Install by aligning the knob on the control shaft and pushing firmly until seated.
• If knob feels loose, inspect the control shaft or replace the keyed adapter if damaged.
• Always turn controls to OFF and disconnect power at the breaker or unplug the appliance before servicing.
• Do not force a stuck knob; check for debris or damage to avoid breaking the new knob.

This lamp shade is the glass light cover that protects and diffuses the appliance light bulb, restoring even interior lighting and keeping the bulb shielded from spills or debris. It replaces a cracked, chipped or missing light cover. What it does:

• Protects the interior light bulb from contact with food, moisture and debris
• Diffuses and softens the appliance light for more even illumination
• Stops rattling or loose fit when the original shade is broken or worn
• Helps prevent direct bulb exposure that can lead to faster bulb soiling

• One lamp shade / light cover

• Ensure the appliance is powered off and bulb is cool before handling
• Handle the glass carefully; wear gloves to prevent cuts and fingerprints
• Seat the shade into its mounting position and secure per the appliance's original clips or retaining hardware
• Use only the correct replacement bulb and do not force the shade into place

This evaporator door is the movable flap that opens and closes to control airflow from the evaporator section. A working door helps maintain stable temperatures and balanced cooling between compartments for consistent refrigerator performance.

• Regulates airflow from the evaporator through the air duct
• Helps keep fresh food and freezer temperatures within set ranges
• A stuck, broken, or warped door may cause warm spots, overcooling, or frost at air vents
• Can contribute to fluctuating temperatures or clicking from the damper actuator when the door won't move

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Access the air duct/damper area per your model to reach the door
• Reuse any existing clips, seals, and hardware from the original assembly
• Verify the door moves freely before reassembly; restore power and allow up to 24 hours for temperatures to stabilize

The Glass Shelf is an OEM component specifically designed for GE side-by-side refrigerators. It provides a durable and transparent surface for neatly organizing foods in the fresh food compartment. Positioned optimally, the glass shelf allows for viewing stored items.

Symptoms of a failing glass shelf include:

• Chips, cracks, or breaks appearing in the glass
• Warping or sagging that prevents flat resting of items
• Difficulty removing or replacing the shelf 

Causes can be repeated impact from heavy loads, temperature fluctuations stressing the material, or accidental drops during cleaning.  

Replacing with this genuine GE shelf restores clarity and strength. It facilitates easier meal planning and organization with a view of what is stocked. Suitable for Hotpoint, RCA, and compatible Kenmore models as well.
 

A tempered glass shelf designed to replace a damaged or missing refrigerator shelf and restore usable storage space. Fits into factory shelf rails to provide a stable surface for food and containers. What it does:

• Replaces a cracked, chipped, or broken refrigerator shelf to restore safe storage
• Provides a flat, sturdy surface for food storage and organization
• Helps contain spills on a single surface for easier cleanup
• Matches OEM shape so it seats properly in existing shelf supports

• Handle with care; glass edges can be sharp—wear gloves and protective eyewear
• Remove food and any clips or supports before removing the old shelf
• Slide shelf into existing rails or supports until fully seated; do not force
• If shelf uses clips or trim, verify those parts are present and undamaged before installation

This crisper drawer replaces a worn, cracked or missing refrigerator produce drawer to restore organized storage and help keep fruits and vegetables contained. Durable plastic fits into your fridge's lower storage area for easy use. What it does

• Holds produce and other refrigerated items to keep them separated from shelves
• Replaces cracked, chipped or broken drawers that no longer seal or slide smoothly
• Prevents spills and helps contain leaks from damp produce
• Restores proper clearance and alignment for the drawer track

• One crisper drawer

• Remove all contents from the drawer and surrounding area before starting
• Slide the drawer out to the stop, lift slightly to disengage from the track, then lift out to remove
• Align the drawer with the tracks and slide in until it seats; confirm smooth operation
• If any track hardware is damaged or broken, replace the track or mounting hardware before installing

This door shelf bar replaces a broken or loose rail on the refrigerator door so bottles and jars stay secure and organized. Durable molded plastic helps stop items from shifting when the door opens and closes. What it does

• Holds food containers and bottles on the refrigerator door shelf to prevent spills and keep items accessible
• Replaces cracked, warped, or missing door rail that lets items fall out when opening the door
• Restores the storage function and appearance of the door bin area
• Fits front-mount positions where a horizontal retaining bar is used

• One door shelf bar

• Designed for a snap- or screw-fit into the door shelf track; inspect existing fasteners before removal
• Remove food and shelves from the door area before replacing the bar to avoid damage
• Use basic hand tools if screws are present and avoid over-tightening

A replacement screw used to secure appliance panels, trims, or components so parts stay aligned and stable. Installs quickly with a matching driver to restore proper fit and reduce vibration or rattling caused by loose fasteners. What it does:

• Fastens panels, trim pieces, brackets or small components in place
• Restores proper alignment and prevents rattling or vibration
• Replaces missing, stripped, or damaged screws that cause loose parts
• Works where the OEM screw size and thread match the original mounting point

• Screw

• Verify this screw matches the original in length, head style and thread before installing
• Disconnect power and remove any obstructing parts before working on the appliance
• Use the correct driver and turn carefully to avoid stripping the head or threads
• Do not overtighten; snug until secure to avoid damaging parts

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This evaporator fan motor replaces a worn or failed refrigerator fan motor to restore proper airflow through the freezer compartment and help maintain even cooling. It's a direct-fit replacement when the original fan motor stops working. What it does

• Spins the evaporator fan blade to circulate cold air from the freezer through the evaporator and into the refrigerator compartments
• Restores airflow when the fan motor has failed, helping reduce warm spots and uneven cooling
• Stops grinding, squealing, or non-spinning symptoms caused by a damaged or seized motor
• Works with the existing fan blade and mounting hardware when compatible

• One evaporator fan motor

• Disconnect power before servicing to avoid shock or injury
• Handle the motor and fan blade carefully to avoid bending blades or damaging wiring

This PTC cover is the protective shroud that fits over a PTC thermistor/starting device to help keep the sensor assembly secure and shielded from debris and contact. It preserves reliable operation by protecting the component. What it does:

• Protects the PTC thermistor/assembly from physical damage and debris
• Helps retain proper sensor position and alignment for consistent operation
• Reduces risk of accidental contact with the thermistor or wiring
• Can prevent intermittent operation caused by a loose or damaged cover

• Disconnect power to the appliance before beginning any repair
• Access may require removing outer panels or an access cover; follow OEM service manual steps
• Handle the PTC thermistor and wiring carefully to avoid damage
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners

The R600 Process Valve with Red Cap is an OEM part for GE refrigerators. It regulates the flow of refrigerant within the cooling system, ensuring proper cooling and temperature control.

A bad process valve can occur due to wear and tear, refrigerant leaks, or mechanical failure. If you notice symptoms such as inadequate cooling, excessive frost buildup, or unusual noises coming from the refrigerator, it may indicate a faulty or malfunctioning process valve.

Symptoms of a bad process valve include:

• Inadequate cooling or inconsistent temperature control
• Excessive frost buildup in the freezer
• Unusual noises coming from the refrigerator

Restore your refrigerator by replacing the faulty process valve with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.