Parts for RBFS21TIAE: Refrigerator Parts

This mullion heater warms the vertical door mullion to reduce condensation and ice buildup between refrigerator doors, helping doors seal properly and reducing moisture-related odors. It's a direct-replacement heater for affected mullion assemblies. What it does

• Provides focused heat to the fridge/freezer mullion area to help prevent frost and ice buildup.
• Reduces condensation that can cause water drips or sticky door seals.
• Helps maintain a consistent door seal by preventing cold spots that let moisture accumulate.
• Common symptom: visible frost or ice between doors, water pooling, or poor door sealing.

• One mullion heater (heater strip/assembly) as described.

• Power should be disconnected before servicing electrical components.
• Typically installed behind the mullion or door trim; access may require removing trim panels.
• Handle wiring carefully and follow OEM wiring and routing; replace any damaged connectors or clips.

This leveling leg and bracket assembly provides an adjustable support foot to stabilize and level the appliance for safe, even operation. Restores proper height and prevents rocking or uneven door alignment. What it does:

• Supports one corner of the appliance and lets you raise or lower height for a level installation
• Helps stop rocking, wobbling, or uneven operation caused by an out-of-level cabinet or floor
• Maintains proper clearance and alignment for doors and drawers to close smoothly
• Designed as a direct-fit replacement for the OEM leveling leg/bracket assembly

• Turn off power to the appliance and disconnect from power source if working near electrical components
• Block or support the appliance before removing or adjusting legs to prevent tipping; have a helper if needed
• Use basic hand tools to remove the old bracket and install the new assembly; tighten securely but avoid over-torquing

This flex ice tray is the replacement tray that holds and releases ice cubes in the freezer compartment. Its flexible design helps free ice quickly and keeps ice accessible for everyday use. What it does:

• Holds water to form individual ice cubes in your refrigerator freezer
• Flexible sections allow easier release of ice without twisting the tray
• Replaces damaged, cracked, or warped trays that hold or leak water
• Helps maintain ice supply by restoring a functional tray when original is broken

• One flex ice tray

• Remove old tray and wipe the area clean before installing the new tray
• Fill tray with water and place level in freezer; allow time to freeze before use
• Handle with care to avoid bending or puncturing the flexible material
• For safety, follow refrigerator manufacturer's instructions when accessing the freezer compartment

This mullion bracket secures the decorative trim (mullion) between oven or microwave sections, keeping the trim aligned and stable for a clean, finished appearance. It replaces a damaged or missing bracket to restore proper fit. What it does

• Anchors the mullion/trim to the appliance frame so panels stay flush and aligned
• Prevents trim from sagging, rattling, or separating from adjacent panels
• Helps maintain a consistent gap between doors or between oven/microwave sections
• Works as a structural mounting point for the mullion piece

• One mullion bracket

• Disconnect power to the appliance before starting any work
• Typical installation uses existing screws; support the trim while removing and reinstalling fasteners
• If access requires removing the oven or inner panels, handle panels carefully to avoid damage
• Tighten fasteners snugly but avoid over-torquing to prevent striping the bracket or screw holes

This display control panel is the refrigerator's electronic user interface that shows settings and accepts touch/button input so you can view and change temperatures and modes. Replaces a damaged or unresponsive front display. What it does:

• Provides the visual display for temperature, mode and status indicators
• Receives user input from touchpads/buttons to change settings
• Restores visible readout when the original panel is cracked, faded, or blank
• Helps fix issues where controls don't respond or display incorrect/missing information

• Disconnect power at the wall before starting to avoid shock.
• Handle the display lens and ribbon connector carefully to prevent damage.
• Reconnect all wiring harnesses and secure the panel before restoring power.

This vegetable pan cover frame is the replacement trim that supports and seals the refrigerator crisper/vegetable drawer, restoring proper fit and helping maintain cooler, more consistent humidity for stored produce. Easy replacement when the existing frame is cracked or warped. What it does:

• Replaces damaged or warped crisper/vegetable pan trim to restore proper drawer alignment
• Helps maintain a better seal around the vegetable pan to preserve produce freshness
• Prevents rattling or catching from a loose or broken cover frame
• Matches OEM fit and mounting locations for straightforward part swap

• 1 vegetable pan cover frame

• Remove power or unplug refrigerator before starting work to be safe
• Usually installs with simple snap-in tabs or a few screws — handle gently to avoid breaking mounting tabs
• Inspect adjoining drawer and tracks for damage while replacing the frame

This condenser fan motor powers the refrigerator condenser fan to help move air across the condenser coils for proper cooling and efficient compressor operation. It replaces a failed fan motor so the condenser fan can run normally. What it does:

• Spins the condenser fan blade to pull or push air across condenser coils for heat dissipation.
• Restores proper airflow when the fan motor has seized, hums, or won't start.
• Helps reduce compressor cycling caused by poor condenser airflow.
• Works with the existing fan blade and mounting hardware when the motor is the only failed component.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle with care to avoid bending condenser fins or damaging wiring.

This mullion bottom axle is the lower pivot that secures and lets the refrigerator mullion (vertical door trim) pivot properly, restoring correct door alignment and smooth opening/closing. Designed to replace a worn or broken lower mullion axle. What it does:

• Provides the lower pivot point for the refrigerator mullion/trim so doors stay aligned.
• Replaces a broken, bent, or worn axle that causes the mullion to wobble or not seat.
• Helps stop binding, uneven gaps, or rubbing between doors caused by mullion instability.
• Works with the mullion assembly to maintain proper door sealing and operation.

• One mullion bottom axle

• Disconnect power and remove any trim or mullion cover per manufacturer instructions before replacing.
• Handle trim pieces carefully to avoid scratching or damaging door finishes.
• Use proper fasteners and torque as specified by manufacturer; do not overtighten.

This articulating mullion is the hinge-cover trim that lets paired refrigerator doors close flush while covering the center gap for a finished look. Replaces a worn or damaged center mullion to restore proper door alignment and appearance. What it does

• Covers the center gap between refrigerator doors and provides a finished trim piece.
• Articulating design allows the mullion to move with door motion for smooth opening and closing.
• Helps doors sit flush and reduces visible gaps caused by a broken or warped mullion.
• Commonly replaced when the center trim is cracked, loose, or no longer aligns properly.

• One articulating mullion piece as shown.

• Disconnect power to the appliance before starting work; follow appliance-specific safety instructions.
• Basic door access and trim removal required; keep track of screws and clips for reassembly.
• Handle trim and surrounding finishes gently to avoid scratching; refer to appliance manual for door alignment steps.

This small torsion spring powers the refrigerator's center door mullion (flipper), helping it flip and seal between the doors. Replacing a weak or broken spring restores smooth door action and helps prevent air leaks and condensation at the center joint.

• Provides return tension for the center mullion/flipper between the fresh food doors
• Helps the flipper align and seal properly for a tight door closure
• Supports smooth opening/closing of the door edge
• Symptoms may include the flipper not flipping back, door not closing flush, clicking/loose mullion, or moisture forming at the center seam

• Unplug the refrigerator before servicing
• Note the spring's orientation/leg position before removal; take reference photos
• Control spring tension and use needle-nose pliers with eye protection
• After install, verify the flipper moves freely and seals along the full height