Parts for Lg LFC20760ST/00: Refrigerator Parts

The Screw is an OEM part for LG refrigerators. This part secures the shelf brackets within the refrigerator compartment.

Causes of a bad Screw can range from physical damage or impact to general wear and tear over time. 

Symptoms of a faulty Screw  include:

• Shelves feeling loose or unstable
• Shelves sagging or not sitting level
• Shelves falling out or collapsing when loaded with items

This OEM LG part is also compatible with some Kenmore models.

This slide rail mounts inside the refrigerator and guides a storage drawer so it opens and closes smoothly. Replacing a worn or broken rail restores proper drawer alignment and easy access to stored items. What it does:

• Supports the drawer and provides a smooth glide path along the cabinet wall
• Maintains alignment to keep the drawer level and on track
• Replaces cracked, warped, or worn rails that cause rough, uneven movement
• Common symptoms: drawer binds or sticks, tilts or sags, falls off track, or shows visible rail damage

• 1 slide rail

• Disconnect power to the refrigerator before servicing interior components
• Remove the drawer and any shelf/glass cover to access the rail
• Save and reuse existing mounting screws and any end caps/brackets; match the rail's orientation to the original if your model uses left/right rails
• Align the new rail with factory mounting points, tighten screws, and test for smooth operation

This rail guide assembly supports and steers a refrigerator drawer along its track. Replacing a worn or broken guide restores smooth sliding and proper alignment, helping prevent binding and damage to bins and rails.

• Guides the drawer as it opens and closes for smooth movement
• Helps keep the drawer level and properly aligned on the track
• Restores easy operation when the rail is cracked, worn, or deformed
• Typical symptoms: drawer hard to slide, tilts or drops, scraping/grinding noises, visible damage to the rail

• Disconnect power and empty the affected drawer before servicing
• Remove the drawer/bin and any screws or locking tabs securing the old guide
• Transfer any reusable clips or end caps from the old guide to the new assembly if present
• Reinstall, ensure proper engagement on the track, and test for smooth operation

This rail guide assembly supports and guides a refrigerator drawer so it slides smoothly and stays aligned. Replace a cracked or worn rail to restore easy opening/closing and keep the drawer from jumping off its track.

• Provides the sliding track and side support for one refrigerator drawer/pan
• Restores smooth movement and proper alignment of the drawer
• Can help resolve sticking, binding, tilting, or the drawer popping off the track
• Often needed when the rail is cracked, stop tab breaks, or wear causes rough travel

• Disconnect power and empty the affected drawer before service
• Remove the drawer (and any shelf above) for clear access; note the original side/orientation
• Release locking tabs or remove mounting screws to swap the rail; secure the new assembly in the same positions
• Reinstall the drawer and test for smooth travel before reloading

This glass shelf assembly replaces a damaged or missing refrigerator shelf to restore usable storage space and a stable surface for food items. It fits into existing shelf tracks and provides a flat, easy-to-clean surface. What it does

• Replaces cracked, chipped, or sagging glass shelves so food can sit level and safely.
• Restores lost shelf space after accidental breakage or removal.
• Provides a smooth, washable surface that resists spills and stains.
• Seats into factory shelf supports for secure placement and proper shelf spacing.

• Remove all items from the refrigerator and shelves before installing to avoid damage.
• Handle glass carefully and wear cut-resistant gloves when removing a broken shelf.
• Slide the new shelf into the factory tracks until it seats fully; do not force.
• If any shelf support rails or clips are damaged, replace them before installing the new shelf.

A replacement glass refrigerator shelf that provides a sturdy, easy-to-clean surface for storing food and containers. Restores lost storage space and helps keep items organized and visible. What it does:

• Supports food, containers and small appliances inside the refrigerator
• Creates a flat, stable storage surface for better organization
• Helps contain spills on a single surface for easier cleanup
• Restores damaged, cracked or missing shelving to regain full shelving capacity

• One glass shelf

• Handle glass carefully and wear cut-resistant gloves to prevent injury
• Remove food and other items from adjacent shelves before installing
• Slide into existing shelf tracks or clips until fully seated; do not force
• If shelf hardware is damaged or missing, replace mounting clips or supports before use

This shelf net is a mesh-style refrigerator shelf designed to support and contain food items while allowing airflow. It replaces torn, stretched, or missing nets to restore storage organization and help prevent items from shifting. What it does:

• Provides a flexible, ventilated surface for storing packaged foods, produce, or deli items
• Helps keep small or irregularly shaped items from falling through larger shelves
• Restores proper storage function when original netting is damaged, loose, or missing
• Compatible with designated shelf frames and snaps into place where equipped

• Unplug the appliance or turn off power to the unit before servicing for safety.
• Empty and remove food items from the affected shelf area before installation.
• Install by aligning the net with the shelf frame and securing per the owner's manual; do not force or modify parts.
• If installation requires removal of shelves or trim, keep fasteners and small parts organized and follow manufacturer instructions.

This glass shelf assembly replaces a damaged or missing refrigerator shelf to restore usable storage space and a stable surface for food items. It fits into existing shelf tracks and provides a flat, easy-to-clean surface. What it does

• Replaces cracked, chipped, or sagging glass shelves so food can sit level and safely.
• Restores lost shelf space after accidental breakage or removal.
• Provides a smooth, washable surface that resists spills and stains.
• Seats into factory shelf supports for secure placement and proper shelf spacing.

• Remove all items from the refrigerator and shelves before installing to avoid damage.
• Handle glass carefully and wear cut-resistant gloves when removing a broken shelf.
• Slide the new shelf into the factory tracks until it seats fully; do not force.
• If any shelf support rails or clips are damaged, replace them before installing the new shelf.

This replacement shutter knob snaps onto the refrigerator's vent lever and gives you fingertip control of the air shutter. Restores smooth, accurate vent adjustment so you can fine-tune airflow to the intended compartment.

• Attaches to the shutter/vent lever on a drawer or shelf cover
• Provides manual open/close control of the air passage
• May help fix: broken or missing knob, slider won't engage, vent stuck in one position, hard to adjust temperature in that compartment
• Durable OEM design for a precise, secure fit

• Unplug the refrigerator before servicing
• Remove the drawer or cover if needed for access to the vent lever
• Pull the damaged knob straight off; align the new knob with the keyed lever and press to seat
• Cycle the slider to confirm the shutter opens and closes smoothly before reassembling

Restore produce storage and smooth drawer action with this vegetable tray assembly, the refrigerator's crisper drawer. Replace a cracked or missing bin to regain capacity and keep spills contained for a tidy, organized fresh food section.

• Holds and organizes fruits and vegetables in the fresh food compartment
• Slides in and out on the existing shelf rails for easy access
• Helps contain minor leaks and spills within the drawer
• Common signs it's failed: cracked or broken bin, won't slide smoothly, falls off the tracks, or doesn't stay seated

• Empty and remove the old drawer; inspect shelf rails for damage or obstructions
• Align the new drawer with both tracks and slide it fully into place; do not force
• Transfer any reusable inserts or labels from the original bin if applicable
• Wash with mild soap and water before first use; avoid hot water on cold plastic to prevent cracking

The Drawer Cover is an OEM part for LG refrigerators. It serves as a protective cover for the refrigerator's crisper drawers, providing a barrier that helps maintain optimal humidity levels and freshness for stored fruits and vegetables. The shelf measures approximately 19" in depth and 26" in width. This product does not include glass. As per the manufacturer's note, the original center support is not compatible with the updated crisper cover. 

You should replace the drawer cover if it becomes cracked, broken, or warped. Common causes of damage include placing heavy items on top of the cover, accidental impacts, or normal wear and tear over time, which can compromise its structural integrity and functionality.

Symptoms of a bad drawer cover include:

• Cracks or breaks in the cover
• The cover not fitting properly or sitting securely
• Difficulty in opening or closing the crisper drawers
• Reduced efficiency in maintaining the freshness of stored produce

This OEM LG part is also compatible with Sears/Kenmore models.

The Crisper Drawer Cover Support is an OEM part for LG refrigerators. This support piece holds the crisper drawer cover in place, providing stability and ensuring that the drawer functions correctly. It helps to maintain the integrity of the crisper drawer structure, allowing for smooth opening and closing while keeping fruits and vegetables fresh.

Over time, the crisper drawer cover support can become damaged due to regular use, heavy loading, or accidental impact. If the support breaks or wears out, it can lead to misalignment or difficulty in operating the crisper drawer.

Symptoms of a bad crisper drawer cover support include:

• The crisper drawer cover not staying in place
•  Difficulty opening or closing the crisper drawer
• The drawer feeling loose or unstable
• Cracks or visible damage to the support piece

This OEM LG part is also compatible with Sears/Kenmore models.

This refrigerator shelf glass replaces the broken or missing glass insert in the shelf assembly. It restores a sturdy, easy-to-clean storage surface and proper support so items can be organized safely without sagging, tipping, or gaps.

• Replaces cracked, chipped, or shattered shelf glass
• Provides the flat, stable support surface within the shelf frame
• Helps keep items level and maintain safe load support
• Designed to install in the existing shelf frame for original fit

• Empty the shelf and remove the shelf frame from the refrigerator
• Wear cut-resistant gloves; carefully remove and dispose of any broken glass
• Place the frame on a flat surface and slide the new glass fully into the grooves, matching the original orientation
• Reinstall the shelf, ensuring the frame is fully seated in the cabinet supports before loading items