Parts for Thermador T30IR70CSS: Refrigerator Section Parts

Base panel for freezer models. Replacement for cracked, broken, or missing bottom trim panel. Installs at the base of the unit to restore appearance.

Installation hardware kit for refrigerators. Includes mounting brackets and connection components for secure appliance setup during initial install or replacement.

This foam piece is an appliance insulation/padding pad that cushions components and helps reduce vibration and noise for a quieter, more stable operation. It fits into a designated cavity to provide padding and minor thermal/noise dampening. What it does

• Cushions panels or components to prevent rattling and wear from vibration.
• Dampens noise by absorbing sound transmission from moving parts.
• Provides light insulation or spacing where specified by the manufacturer.
• Helps keep adjacent parts from making hard contact during operation.

• One foam piece as shown.

• Disconnect power (and water if applicable) before accessing the area.
• Install in the OEM location; ensure the foam sits flat without excessive compression.
• Use only the adhesive or fasteners specified by the manufacturer—do not substitute solvents or household glues unless directed.

Replacement cover for your refrigerator. Snaps or clips into place to conceal internal components. Order a new one if yours is cracked, broken, or missing.

Insulation panel for refrigerator or freezer compartments. Replaces cracked, damaged, or missing insulating parts that affect temperature retention.

Control button not responding or missing? This push button restores tactile control on your refrigerator panel. Simple snap-in installation takes minutes.

Fix frost buildup and icing issues in your refrigerator with this defrost heater. Melts accumulated frost to maintain optimal temperature and airflow.

This is an electrical on/off switch used to control power to an appliance circuit. It replaces a failed switch so controls respond normally and the appliance can be powered on and off safely. What it does

• Opens and closes an electrical circuit to enable or disable appliance power or a specific control function
• Commonly replaces a worn, stuck, or unresponsive switch that prevents controls or lights from operating
• Can resolve symptoms like no power to a control, intermittent operation, or a button that won't actuate
• Designed to mate with the appliance's existing wiring and mounting points

• One electrical on/off switch

• Disconnect power to the appliance at the breaker or unplug before working on wiring
• Verify proper wire locations and secure all terminal connections; replace only with the exact part specified by the manufacturer
• Handle the part carefully to avoid bending terminals or damaging the switch actuator

Buttons not responding or cycles won't change? This control panel module restores user interface function and proper command communication in your refrigerator.

This replacement heating element warms dishwasher wash water to help detergents dissolve and improve cleaning and drying performance. Designed to restore proper water temperature for normal wash cycles when the original heater fails. What it does:

• Heats wash water so detergents activate and soils break down during the main wash.
• Helps the rinse/dry phase reach higher temperatures for improved drying and sanitizing.
• Common symptoms: dishes not getting clean, poor drying, unusually long cycles, or no heat during cycles.
• Works as the direct replacement for a failed or damaged tub heater assembly.

• Always disconnect power to the appliance before starting work; verify power is off at the breaker.
• Access typically requires removing the lower kick panel or toe panel—handle internal components and wiring with care.
• Inspect mounting gaskets and wiring for damage; replace any corroded connectors or compromised seals.
• After installation, restore power and run a short test cycle to check for leaks.

Fix squealing noises, weak airflow, or intermittent spinning in your freezer with this replacement fan motor. Restores proper cooling and ventilation.

If your refrigerator isn't cooling properly or cycles erratically, a faulty temperature sensor is often the cause. This NTC thermistor restores regulation.

This is a replacement micro switch used in select Bosch-built appliances. It opens and closes an electrical circuit when actuated by a lever or cam, enabling functions like starting/stopping a cycle or detecting a position.

• Controls power or signals by opening/closing a low-voltage circuit when pressed
• Commonly used for on/off, door/lid, or position-sensing functions
• Failure may cause the unit not to start, intermittent operation, or features that won't engage
• May also present as unresponsive buttons or functions that only work when pressed a certain way

• Disconnect power before servicing; verify no voltage is present
• Access location varies by model; remove panels as needed to reach the switch
• Note wire positions and terminal orientation before removal
• Test continuity with a meter after installation to ensure proper operation

The FIXTURE is an OEM replacement part for Bosch freezers. Typically located inside the fresh food compartment, fixtures hold slidable wire shelves, bins, crispers, and other removable storage accessories in precise positions.

Causes of a faulty fixture can include cracking or breaking of plastic rails from repeated impact or overloading. Clips and mounting attachments may also loosen over time.

Symptoms of a bad fixture include: 

• Shelves, bins, and pans that no longer slide smoothly or feel insecure
• Storage accessories like crispers that tilt or are difficult to remove
• Interior rattles or banging noises coming from loose components

This replacement Bosch fixture returns stability and structure to the organization system. Realigning fixtures maintains consistent placement and secure engagement of accessories for tidy, accessible food storage. 

Compatible with Thermador, Gaggenau, or Kenmore French door models utilizing consistent interiors.

This temperature limiter safeguards the evaporator defrost heater by opening the circuit if temperatures rise too high. Replacing a failed limiter restores defrost safety and helps prevent frost buildup and inconsistent cooling performance.

• Protects the defrost circuit by cutting power to the evaporator heater when an over-temperature condition is detected
• An open/failed limiter prevents the heater from energizing, causing frost accumulation on the evaporator and warm refrigerator temps
• Designed to be installed in the original location and orientation for accurate temperature sensing

• Disconnect power before servicing; evaporator fins and sheet metal are sharp—use cut-resistant gloves
• Access the evaporator compartment and note the limiter's original mounting and wire routing before removal
• Transfer any clips/insulation sleeves and reconnect wiring to the same terminals; do not bypass this safety device
• Reassemble, restore power, and monitor for normal defrost operation

This halogen light bulb restores bright, reliable illumination in your appliance so you can clearly see the cooking area or interior. Replace a burned-out or flickering bulb to maintain visibility and safe operation. What it does:

• Provides illumination inside the appliance or over the cooking surface
• Replaces a failed halogen lamp to restore proper lighting
• Typical symptoms: light won't turn on, is dim or flickers, or works intermittently
• Helps you monitor food and check progress without guesswork

• 1 halogen lamp

• Disconnect power/unplug and allow the bulb and surrounding area to cool completely before service
• Access the lamp per your model's instructions; remove any lens or cover carefully
• Handle the new halogen bulb with gloves or a clean cloth; avoid touching the glass capsule
• Match the bulb type and rating specified for your model; do not exceed the rated wattage

This is a humidity sensor designed for the freezer compartment of a refrigerator. It monitors moisture levels inside the freezer to help regulate defrost cycles and maintain proper conditions for food storage. Replace this sensor if you notice excessive frost buildup, inconsistent freezer temperatures, or if the defrost system is not cycling correctly.

This is an active carbon filter designed to remove odors from inside the refrigerator compartment. It absorbs and neutralizes food smells to keep the interior air fresh. Replace this filter if you notice persistent unpleasant odors inside the refrigerator despite cleaning, or on a regular maintenance schedule as recommended.