Parts for Craftsman 247287751: Replacement Parts

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

Hex head screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if missing, stripped, or damaged during maintenance.

This flexible coupling is a genuine MTD part, sold individually. This flexible coupling can be used as a replacement part for a log splitter or a chipper shredder. The purpose of the flexible coupling is to carry on the power transmission between multiple shafts. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This flexible coupling is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, and Yard Man.

Protective coupling shield for log splitters. Guards the coupling connection from debris and damage. Replace if cracked, bent, or missing for safety.

Grease retainer fastener for log splitters. Secures and holds the grease seal assembly in place. Replace if cracked, damaged, or missing during maintenance.

Replace a cracked, bent, or missing bracket and flange on your log splitter. This structural component provides secure mounting and support for safe operation.

Lock washer prevents fasteners from loosening due to vibration in lawn mowers, snowblowers, and outdoor power equipment. Simple replacement part.

Log Splitters use this plug pipe to cover the oil tube and measure the amount of oil in the engine with the included dipstick. The dipstick sits inside the oil tube, and when it is pulled out, the amount of oil is determined by the markings on the dipstick. If the plug pipe is lost or misplaced while replacing the oil or making repairs to the engine, it will need to be replaced to prevent oil from leaking and to keep the pressure inside the oil tube optimal. Maintaining the correct oil level in all engines is critical to keeping the engine running. If the engine runs without oil, major damage can be done to the pistons and other parts, making the engine seized and have to be replaced. It is less expensive to maintain the oil than it is to replace the engine. This plug pipe with dipstick is an OEM replacement part that is sourced directly from the manufacturer. It is a gold-colored metal part with an attached dipstick. It is sold as an individual unit that is designed to be used on log splitters manufactured by MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Yard Machines.

This is an oil filter designed for use in larger gasoline-powered landscaping and outdoor equipment such as log splitters and chippers. An oil filter is an essential safeguard to maintain a good operating condition and ensure long life in a gas engine. Oil filters remove toxic chemicals as small pieces of debris that can end up in the engines. Because these contaminants, if improperly removed, could also end up in the air or in the environment in other ways, oil filters must be meet EPA emission regulations. This filter not only meets federal environmental standards but also is an OEM guaranteed replacement part that is manufactured to the identical specification of the original parts being replaced. By the very nature of what it's supposed to accomplish, eventually, the filter will need to be replaced. Over time the filter's elements will become full of debris, and failing to replace it in a timely manner runs the risk of allowing the captured pollutants to escape back into the engine oil. When replacing the old filter, make sure to follow environmental guidelines as well, disposing of the oil and filter according to posted regulations. Replacing the filter is the ideal time to replace the engine oil as well. This filter is compatible with Husky, Cub Cadet, Troy-Bilt, Yard-Man, and MTD equipment.

Replace your power equipment's filter head to maintain clean fuel flow and optimal engine performance. Attaches to filter with built-in valve. Verify fit.

Replace cracked or missing 3/4 inch hose barb fitting on lawn tractors, log splitters, and chippers. Secures hose connections for proper operation.

This nut, or slotted nut, is a genuine MTD part. It is a replacement part for use on lawn mowers, log splitters, wood chippers, lawn tractors, and chipper shredders. It is hexagonal in shape.The uses for this nut vary greatly depending on the machine with which owners plan to use it. Generally speaking, nuts work to secure various parts of components together. Loosening and tightening most nuts can be accomplished with a wrench. Before making any repairs, be sure that the engine has completely cooled, empty the fuel tank to avoid spillage, and disconnect the spark plug or battery. Wear work gloves and other protective gear.This nut is a genuine OEM part sourced directly from the manufacturer. It is sold individually; very often, more than one nut is used on machines such as these, so be sure to check how many are needed. It is designed for compatibility with various machines made by Agway Craftsman, Cub Cadet, Duerr, MTD, Lawn Chief, OEM, Ranch King, Remington, Ryobi, White Outdoor, Yard Machines, and Yard-Man.

Secures wheels and attachments to axles on lawn mowers and tractors. Replace if bent, rusted, broken, or lost to restore safe equipment operation.

This hubcap is an authentic OEM replacement part sourced directly from the manufacturer for use on log splitter and chipper wheels. The hubcap covers the central opening of the wheel assembly. This prevents dirt and debris from getting into the wheel assembly. If the hubcap comes off during use or is lost when replacing tires, a new one should be installed. The machine will work without a hubcap; however, the interior wheel assembly will be open to flying debris and could be damaged if rocks or large limbs go into the wheel assembly. During routine inspection and maintenance, the hub caps should be checked for damage and to make sure they are in place.The hubcap is easily removed and replaced with a screwdriver needed to pry the old hubcap off if it is still on the machine. The new hubcap simply snaps into place. This hubcap is made of high-quality metal and is sold individually. This hubcap is designed to be used with log splitters and chippers manufactured by MTD, Cub Cadet, Troy Bilt, Husky, and Yard-Man.

Tubeless air valve for lawn tractor and mower tires. Replace when cracked, leaking, or damaged during tire changes. Installs in wheel rim for proper inflation.

This cutting wheel assembly sits inside the chipper shredder housing to break down yard debris into smaller pieces. Replace when blades become dull, chipped, or the wheel wobbles excessively during operation.

Roller bearing for tillers. Replace if you notice rough operation, grinding noise, or difficulty moving parts. Verify fit with your model number.

Flat washer for lawn tractors and garden equipment. Distributes load under bolt heads and prevents surface damage. Replace if worn or missing.

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

Replacement hex bolt for lawn mowers and outdoor power equipment. Secures components throughout the machine. Replace when stripped, broken, or missing.

Threaded nipple pipe connector for lawn tractors, log splitters, and chippers. Replace if cracked, stripped, or leaking to restore secure fitting.

Replacement hex bolt for lawn tractors, log splitters, and wood chippers. Secures components when original is stripped, missing, or corroded.

Hex screw for lawn mowers and outdoor power equipment. Replaces lost, stripped, or damaged hardware. Secures components and panels during assembly.

Wood not splitting properly or getting jammed? This log splitter wedge assembly guides wood through the splitting mechanism. Durable metal construction.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

This part is a replacement floating gib plate. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or defective floating gib plate in a variety of different log splitter models.The floating gib plate works to support the wedge assembly and keep it in good alignment. This part can become worn or broken over time and will require replacement to keep the equipment functioning properly. Proper tools may be required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this floating gib plate, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this floating gib plate is suitable for use on several different models of lawnmowers manufactured by MTD. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Hex center nut secures components on lawn mowers and outdoor power equipment. Replace if stripped, corroded, or missing to ensure proper assembly.

Replace a lost, stripped, or corroded nut on your lawn mower, tractor, or outdoor power equipment. Secures components for safe operation.

The replacement screw seen here is made from high-quality, durable metal. It is an identical replacement for a faulty screw in many types of lawn and garden equipment. The screw features a hex-bolt shaped head and is used for various applications in the machines. Owners will want to refer to diagrams of their model to ensure the correct application for the screw. A screw may need to be replaced for any number of different reasons. In some cases, the screw could become lost when making other repairs to the machine. It could also become bent or the threads could be damaged. Corrosion is also a possibility over time. Replacing the screw is typically considered a fast and easy repair. The screw is a genuine OEM replacement part that is sold individually. The screw can be used for many models of snowblower, lawnmower, chainsaw, tiller, string trimmer, log splitter, edger, and wood chipper. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This part is a replacement stripper half. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken, detached or malfunctioning stripper half in a variety of different log splitter models.The stripper helps to remove a partially split log if it gets stuck within the wedge assembly. This enables the log splitter to remain clear and unclogged of debris and keeps it functioning properly. This part is subject to wear and tear and may require replacement within the lifespan of the equipment. Wear work gloves to protect the hands when replacing equipment parts. Additionally, when working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this stripper half, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this stripper half is suitable for use on several different models of log splitters manufactured by MTD. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.