Parts for Briggs & Stratton 12R113-0734: Rewind Starter / Fuel Tank Parts

This oil seal is a common part engineered to work in engines that power generators, vacuum cleaners, snowblowers, leaf blowers, mowers, and other small engine applications. The seal sits between the crankcase and the crankshaft. It is designed as a barrier to prevent oil leakage and to stop contaminants from leaving the crankcase. When the gasoline engine exhibits diminished power, and especially if it begins to emit oily gray or bluish smoke, there is a good chance the oil seal needs to be replaced. In order to replace the faulty seal, begin by removing the starter housing and taking off the nut that holds the starter wheel to the main shaft. The user will find the old seal on this shaft. Remove it and install the new seal, pushing it into place with the edges of a socket, then tapping it securely into place with a hammer. When choosing a replacement seal, remember to use an OEM genuine replacement part that is guaranteed to match the specs for the original part. This will ensure a quality match and long replacement life. This seal is compatible with Toro, Lawn-Boy, and Briggs & Stratton engines.

This cylinder head gasket is a genuine Midwest Engine part, sold individually. This cylinder head gasket can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, and wood chippers. The purpose of the cylinder head gasket is to protect the cylinder head from the accumulation of debris by sealing it off; the cylinder head gasket also prevents internal materials from leaking out of the appliance.The cylinder head gasket might have to be replaced if the seal is broken and external materials can pass through into the cylinder head. This could be a result of puncturing, tearing, scraping, or eroding to the component, in which case the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This cylinder head gasket is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, Snapper, and Simplicity.

This OEM replacement part is a crankcase gasket for lawnmowers. The crankcase gasket is used to seal the two halves of the crankcase. If the crankcase gasket is no longer sealing properly, it might need to be replaced. Luckily, this is a relatively simple repair. Before beginning, make sure the engine has cooled. Once cooled, locate the old crankcase gasket. Tilt the mower on its side. Once tilted, remove the blade of the mower. After removed, clean any dirt that might be on the crankshaft. Drill a small hole into the old seal and be careful not to damage the crankshaft. Insert a screw into the drilled hole and use it to pry off the old crank gasket seal. Once removed, install the new crankcase gasket. Reinstall the blade, and tilt the mower back to its upright position.This genuine replacement part is sold individually and is compatible with MTD brand lawnmowers.

The oil drain plug plays an important role in lawn and garden machines, although most only realize how important it is when it is not working properly. The plug fits into the oil drain at the bottom of the motor. It is removed to allow the oil to be drained from the motor when changing the oil. The durable oil drain plug may need to be replaced if it is no longer working properly. There could be leaks that allow the oil to escape from the motor, which would indicate it needs to be replaced. If the plug is lost, it will need to be replaced, as well. The genuine OEM replacement oil drain plug is sold individually. It is used for lawn mowers, snowblowers, tillers, leaf blowers, pressure washers, chainsaws, edgers, log splitters, wood chippers, heat pumps, generators, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Kenmore, Toro, Cub Cadet, Homelite, Murray, Lawn-Boy, Snapper, and Simplicity.

This replacement part is an oil seal and is intended for use in different types of lawn equipment. This part is a genuine replacement part made by Midwest Engine. Oil seals are typically found in machines with small engines and help ensure that the oil stays within the designated area. The seal is responsible for making sure there are no leaks during or after use. A new oil seal might be needed if the current one is missing or damaged. This can include being cracked or chipped. Any damage may cause oil to leak which can lead to additional problems within the machine itself. Be sure to wear work gloves during this repair as oil is difficult to remove from hands. Refer to the appropriate owner's manual before replacing this part. This oil seal is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This is a genuine replacement oil fill cap that is found on many lawn and garden engines. The oil fill cap is responsible for securing the oil dipstick and fill tube. This small plastic plug screws into the oil fill tube with plastic threads and secures the oil, keeping it from leaking and providing the appropriate engine pressure. Over time, this small plastic piece can become worn, corroded, damaged, or even lost, which will require a full replacement. Without an oil fill cap, the pressure cannot be maintained in the engine and the oil could spill out of the machine. This genuine OEM oil fill cap is manufactured by Briggs & Stratton to exact standards. It is compatible with engines and equipment from this brand, as well as those from Toro, Snapper, and Vanguard. The oil fill cap is sold as an individual part and does not include the dipstick or any other parts and accessories. It is a good idea to inspect caps and other elements when performing maintenance to ensure proper operation. When replacing the filler cap, no tools are required, but the engine should be cool before doing any kind of work.

The flywheel key is the component on outdoor equipment that keeps the flywheel connected to the crankshaft. Over time, this key may become damaged or broken, particularly if the engine experiences a forceful stop, like hitting a large stationary object. If the flywheel key breaks, the engine will not start. A slightly damaged flywheel key is noticeable through symptoms like misfiring, backfiring, or having no power. If any of these are occurring, the flywheel key should be replaced to prevent complete engine failure.A flywheel puller tool is required for this repair. Make sure the engine is cool before working on the flywheel. Wear safety gear, including gloves and eye protection. Disconnect the spark plug and remove the blower housing. Remove the flywheel mounting nut and set it aside. Take the recoil starter cup off the mower. Use the flywheel puller to remove the flywheel and access the flywheel key. Remove the broken flywheel and replace it with the new flywheel. Reverse the steps to put the mower back together.This flywheel key is made of an aluminum alloy and is sold as an individual part. It is designed for use in lawnmowers, lawn tractors, and other small engines manufactured by Briggs and Stratton, Toro, Lawn-Boy, Simplicity, MTD, and others.

This screw is a genuine Midwest Engine replacement part for small engine appliances, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to tightly link materials together through rotation that pierces into the material. A screw might have to be replaced in the event that it is lost or misplaced, a common occurrence due to its size. A screw might also be replaced if it deteriorates over time, through erosion, cracking, or piercing, thereby reducing its efficacy in holding materials together. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately, as the materials held together by the screw must continue to be held together. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: Briggs & Stratton, Toro, Cub Cadet, and Lawn Boy.

This valve retainer is an authentic replacement part for use with many types of small lawn and garden engines. The retainer valve helps to keep the lock valve spring on the valve. It is shaped similarly to a washer, which will fit over the top of the valve spring. The piece also helps to add space between the valve spring and the head of the valve. The valve retainer is made from metal, and it is a small piece. The retainer could become lost and need replacement when performing other maintenance on the engine's valves. The metal could also become corroded or break. In those cases, it will need to be replaced as soon as possible. This is a genuine OEM replacement part that is sold individually. The part can be used with many types of equipment including lawn mowers, snowblowers, tillers, pressure washers, edgers, leaf blowers, log splitters, and wood chippers. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, MTD, Simplicity.

This part is a replacement camshaft. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. It is intended to replace a defective or broken camshaft in various models of outdoor power equipment.The camshaft is important as it closes and opens the equipment's exhaust and intake valves. This part is a critical engine component and thus should be replaced if faulty in any way. Make sure to drain the fuel tank and disconnect the spark plugs before attempting to install this part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this camshaft, the appropriate owner's manual and equipment diagrams should be referred to. This camshaft is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with outdoor power equipment models that have been manufactured by Midwest Engine, MTD, Craftsman, and other brands.

This is a genuine intake gasket replacement that is designed for use in certain lawn mower engines. This specialty intake gasket is what is responsible for creating the seal between the carburetor and the breather tube so that no gases or fluids leak when they pass between the two. This gasket is subjected to constant high pressure, vibrations, and extreme temperatures, and over time it will need replaced. Gaskets are generally considered a part of routine maintenance on most engines, and many owners will choose to keep a few extra on hand in case of an urgent repair need. This genuine OEM intake gasket is manufactured by Briggs & Stratton and designed to offer an identical replacement for the original gasket that came on the new unit. It is compatible with lawn mower engines in models from Briggs & Stratton and Toro, and will fit on over 150 different engine models in lawn mowers from these brands. The intake gasket is made of durable composite material. It is also a good idea to replace gaskets when servicing the carburetor to ensure a proper seal after reassembly. Be sure to use the right tools to install this part so that it isn't damaged in the process.

This is a replacement screw that can be used on various types of lawn and garden equipment. The type of equipment will affect where the screw is used on the tool. A screw is used to attach various components together so nothing comes loose while the tool is in use. It can also be used with a nut. It's best to choose a nut that has the same finish and threading as the screw.A screw can be damaged in many ways. If this occurs, it will need to be replaced. Corrosion, wear and tear, extreme stress, and high temperatures can all cause a screw to fail. Inspecting the screw can indicate whether it will need to be replaced. Use a screwdriver to take off the old screw, or use a pair of pliers if the screw has become stripped. Replace it with a new screw.This is an authentic OEM replacement part sourced directly from the manufacturer. Each screw is sold individually. The component is designed for use with lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, edgers, chainsaws, generators, and wood chippers manufactured by Briggs & Stratton, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Homelite, and Murray.

This is a high-quality carburetor repair kit made for use with several types of lawn and garden equipment. It has several different components needed repair the carburetor in a small engine. The carburetor is used to ensure air and fuel mix together in the correct amounts before being ignited in the cylinder so the engine runs properly.If the engine is refusing to run even when the fuel tank is full of gasoline, the carburetor may be malfunctioning. It can be tested directly to determine whether a repair or replacement is needed. Take the air filter out and add a small amount of fuel to the carburetor. Use the starter rope to see whether the engine turns on. If it does but then dies, this indicates the carburetor should be repaired or replaced.This is a genuine OEM replacement component that is directly sourced from the manufacturer. It is sold individually. The carburetor repair kit is designed for use with lawnmowers, leaf blowers, and tillers made by Briggs & Stratton, Cub Cadet, Toro, Simplicity, and Murray. Work gloves and basic tools are needed to use this component.

The carburetor float is housed in the carburetor and is used to help control the fuel flow. It adjusts the needle valve and ensures that the appropriate amount of fuel reaches the carburetor bowl. This helps provide the right mixture of air and gasoline for the engine to operate at optimal performance. Over time, the float can become worn or detached, or the pin could come loose. When this happens, the flow is affected, and the engine will not operate correctly. If the float isn't working correctly on a lawnmower or another small engine, it might be time for a replacement. This replacement part is a genuine OEM product designed to be used with many Briggs & Stratton engines, including lawnmowers, pressure washers, generators, and other lawn and outdoor equipment engines. It is sold as a single unit with the metal cotter pin included. There are more than 150 compatible machines that this unit will work with. If your lawnmower isn’t working as it should or if the float has come loose and can't control the flow appropriately, this OEM replacement can get things back in working order.

This is a replacement for a blower housing on select models of engines used in blowers and vacuums. The blower housing is a durable plastic part that holds the blower hose for intake and outflow of the air in the machine. This is where the fan will be located that creates the vacuum to suck air into or out of the unit and provide the proper operation. if the blower housing is damaged, broken, or otherwise not working, the unit may not function at all. This genuine OEM part is a replacement that is manufactured to exact standards by Briggs and Stratton. It can also be used in select models from Toro. It is going to be the solution for anyone who needs a new blower housing for their unit. This piece is sold as an individual assembly and does not include related parts or hardware; those will require a separate purchase. The blower housing will require screwdrivers to replace. Always wear gloves and disconnect the power supply before performing repairs like this. It will also be a good idea to work in a well-ventilated area and allow the unit to cool to avoid burns or other issues.

The pawl friction plate on lawn and garden engines is an essential part of the starter assembly that is needed to crank start the machine. It provides power to the starter cup. If the engine on a machine will not start, it could be due to a broken or worn pawl friction plate. Replace the plate immediately to ensure your machine is working properly. This is genuine OEM part is compatible with a range of product types, including lawnmowers, snowblowers, tillers, pressure washers, generators, log splitters, wood chippers, leaf blowers, and chippers. Compatible brands include Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, Snapper, Simplicity, and Toro. The part is sold individually. Keep in mind that this only includes the pawl friction plate. It does not contain the screw or spring, and these will need to be purchased separately.

This is a replacement dipstick tube seal that is designed specifically for use with select Briggs & Stratton engines on lawn and garden equipment. This seal is designed to provide a seal in the oil dipstick tube to ensure that oil stays in the crankcase and air stays out. It sits in the bottom of the fill tube and also helps hold the tube securely in place. Over time, the seal can become damaged or broken and result in oil leaks. If this happens, the seal should be replaced immediately to ensure proper engine operation. Oil leaks can lead to poor performance or even cause further damage to the engine if left unrepaired. This replacement tube seal can get equipment back in proper working order in no time. This dipstick tube seal is manufactured to specific standards by Briggs & Stratton. It is designed for use with multiple models of engines that are installed on blowers, generators, tractors, and snow blowers from Briggs & Stratton, Murray, and Toro. There are over 150 compatible units that can use this exact part. This durable seal is made of premium composite rubber materials and is sold individually. Be sure to drain the oil before replacing this part to avoid spills.

This is a screw. A screw is a type of fastener that is used to secure parts together. This particular screw is used for various applications on outdoor power equipment machines.A new screw may be needed if the original is stripped, worn, or otherwise damaged in any way. If the screw is not fastening components together effectively, a new screw may be needed. This part is a genuine Midwest Engine part and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific screw is used on a variety of parts including control covers on snow throwers manufactured by Cub Cadet and MTD. It is also used on the snow hood of Toro snow throwers. This same screw is also used on the muffler guard of Briggs and Stratton engines, Toro snow throwers, Murray snow blowers and snow throwers, Snapper snow throwers, and Simplicity snow throwers.

This is a replacement screw to secure the pawl friction plate used in many types of lawn and garden equipment. The part is also sometimes called a flange bolt. It is identical to the original screw that came with the machine and will replace a lost or damaged screw. The screws could become damaged due to corrosion or an incident that causes the screw to bend or break. They also serve as replacements in case the screw was lost. Replacing the screw is a simple repair to make. This is an authentic OEM replacement screw that is sold individually. Some buyers might want to have an extra screw on hand. The replacement screw for the pawl friction plate can be used on lawn mowers, snowblowers, tillers, pressure washers, generators, edgers, log splitters, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.

This genuine OEM replacement part is a spark plug terminal for a wide variety of small combustion engines. In a combustion engine, the spark plug generates a small electrical charge that creates enough power to start up the ignition and engage combustion. The plug connects to the ignition through the terminal. Spark plugs generate and then pass a small electrical current through to the ignition. Usually, the main issue with spark plugs is that this current hyper-extends and ends up frying the spark plug. However, if the terminal is damaged, the charge will not pass into the ignitor, and the engine will not turn. If the spark plug can carry a charge but the engine still won't turn, it's likely the terminal that needs replacing. This is an easy repair because the terminal should just snap on and off. If stuck, a pair of needle-nose pliers should make it easier. This high-quality replacement part is compatible with engines from Murray, Toro, Lawn Boy, and Briggs & Stratton. It is sourced from the original manufacturer and ships individually.

This replacement part is a switch key. This is a genuine replacement part made by Midwest Engine. This part is commonly found installed within certain lawn mowers and is able to ensure that the user can turn the machine on and off according to the desired settings. A new switch key might be needed if the current one is unable to turn the machine on or off. This can be caused by normal wear and tear over time. If the key is no longer working, it can be due to this part being damaged. This should be a fairly simple repair and should only use common household tools. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.