Parts for Weedeater 96112009200: Rotary Mower Parts

Deck housing for walk behind lawn mowers. Replaces cracked, damaged, or worn housing components. Essential for structural integrity and protection.

Replacement control bar for walk-behind lawn mowers. Mounts to the handle as a safety mechanism. Needed when original bar is cracked, broken, or bent.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

Replacement handle bolt for lawn mowers and outdoor power equipment. Secures upper and lower handles together. Replace if damaged, stripped, or missing.

This is a mulcher plate that is intended for use with many different models of lawn mowers. This piece is sometimes called a mulching door. The plate is used as a means to help keep the grass beneath the deck of the mower. This can help to ensure that the smaller clippings will decompose, which can provide the soil with the nutrients it needs. It will attach over the side discharge chute, where it can be opened or closed.The mulcher plate is durable, but it could still become damaged. In some cases, it might be damaged during use. Over time, there is a chance that the plastic could eventually crack. If it is not working properly, it will not mulch properly. Owners can quickly and easily replace the mulching door.The mulcher plate will work with certain models from Weed Eater, Husqvarna, Poulan, Craftsman, Murray, and Ryobi. This piece is sold individually. This is a genuine OEM replacement part sourced from the manufacturer.

Rear axle arm assembly for walk-behind lawn mowers. Replaces broken or bent axle arms that support the rear wheels. Essential structural component.

Handle knob for lawn mowers, snowblowers, and trimmers. Attaches to upper or lower handle adjustment levers. Replace when cracked, broken, or missing.

Mower wheels not turning smoothly or axle movement restricted? This axle arm assembly enables proper axle motion for smooth wheel operation on walk-behind mowers.

Fix wheels that won't turn or wobble during use with this lawn mower axle assembly. Restores proper wheel rotation and smooth operation on walk-behind mowers.

Hairpin cotter pin clip secures components on shafts in walk-behind lawn mowers. Replace if bent, broken, or missing to properly retain parts.

Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.

If your lawn mower handle won't stay up or collapses during use, this torsion spring restores proper tension. Quick 10-minute repair for most models.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

This mulching blade is a 3-in-1 blade. It can cut, discharge, and bag grass clippings. This versatility is due to its curved surface design, which promotes an increased cutting edge. When this mulching blade is in action, the grass clippings will be transferred to the deck and cut once more. Once it falls back to the ground, the clippings are smaller. Smaller clipperings are suitable for mulching because they decompose faster. A mulching blade is made from sturdy metal, but prolonged use can make its edges dull. A dull mulching blade will result in undesirable fraying and tearing cuts. A mulching blade replacement takes 30 minutes or more. Start by disconnecting the spark plug and turn the machine on its side. Then, remove the old blade. Insert the replacement into the blade spindle and use a ratchet for a secure fit. This original Husqvarna mulching blade replacement is a perfect choice. It is made explicitly for lawnmowers from Husqvarna, Murray, Craftsman, Weed Eater, Ariens, Ryobi, and Poulan. It measures 22 and comes in solid metal construction. It is sold individually.

Height adjustment bracket for walk-behind mowers. Mounts to deck to enable cutting height changes. Replace if bracket is bent, cracked, or broken.

This is a front height adjuster lever assembly with a selector spring used on walk-behind lawn mowers. It allows you to change the cutting deck height by selecting from multiple positions. Replace this part if the height adjustment lever is loose, won't stay in position, or the spring is broken, making it difficult to set or maintain the desired mowing height.

Attaches to the height adjuster lever to set your mower deck cutting height. Replace if cracked, broken, or missing for proper deck adjustment control.

Height adjuster spacer for lawn mowers and trimmers. Mounts to deck adjustment mechanism. Replace if cracked, worn, or missing to restore proper function.

Replacement shoulder bolt for walk-behind lawn mowers. Installs on various mower assemblies. Order when original bolt is stripped, broken, or missing.

Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.

Fix loose or vibrating parts with this tiller lock nut. Secures bolts on tillers, mowers, and snowblowers. Easy 5-minute repair for reliable fastening.

Replace your worn or broken lawn mower self-propel extension spring. This domed spring connects drive components and can wear out or stretch over time.

Curved cylindrical washer for walk-behind lawn mowers. Secures components during operation. Replace if cracked, worn, or missing to restore proper fit.