Samsung 6031-001523 Washer, Wave OEM Part

Ordered new spider and associated parts from you guys. Rather than install spider which was bare aluminum I coated the entire unit except spindle with 3 coats of epoxy paint. cleaned the drum and water tub the minor scratches in the front drum I filled with two part epoxy and leveled. Checked rear bearing which were ok, but if you need them they are availible from bearings direct on line 6307zz interior bearing and 6306zz exterior bearing cost 21.00 including shipping. Assembly was reverse of tear down which you guys provided on a excellant video. I was a little perturbed with Samsung as to the design of the support spider but I expext to get another 7 plus years out of this machine. With the cycle counter we were on our 3196 load and a family of 6 or 1.25 loads per day. I had a pair of Asko that were 15 years old and are still being used by my middle daughter. I guess I will go back to Asko when i scrap the Samsung set and use the motor for a wind generator. Took right at 2.5 hours disassembly and reassembly. another hour to clean the parts a day for the paint to dry. Bill C

Replaced wave washer and rubber gasket plus tub seal - appliance parts pro videos are excellent and so is their parts department ( it probable took me 8 hours to repair my washer ) my experience was excellent with appliance pro!!!