Parts for Weedeater FB25 TYPE 2: Scroll / Hose / Impeller Parts

This part is a replacement handle assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective handle assembly in a variety of handheld blower models. The handle assembly features the trigger throttle and also provides a comfortable grip for the user. The equipment may be difficult to use or rendered unusable if this part is broken or faulty. Thus, it should be replaced immediately. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this handle assembly, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this handle assembly is suitable for use on several different models of handheld blowers manufactured by Husqvarna, Poulan, Weedeater, and other brands. Please note that this is a genuine part made of high-quality, durable plastic and is sold individually.

Replacement tension spring for leaf blower mechanisms. Installs in internal assemblies to provide torque and movement. Order when original is stretched or broken.

Replacement vibration isolator for leaf blower handles. Needed when original isolator is cracked, broken, or worn from use. Attaches to handle assembly.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

Can't start your leaf blower or trimmer? A broken starter handle prevents the pull cord from engaging the engine. This replacement handle restores easy starting in minutes.

This part is a replacement recoil starter rope. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, snapped, or defective recoil starter rope in a variety of leaf blower models. This recoil starter rope wraps around the recoil starter pulley to supply power to the leaf blower. The rope may snap or become frayed and worn over time, and thus will require replacement. When working on or near any engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this recoil starter rope, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this recoil starter rope is suitable for use on several different models of leaf blowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer or a leaf blower. The purpose of the retainer in a string trimmer or a leaf blower is to secure the recoil starter pulley while the appliance is in use. The retainer in a string trimmer or a leaf blower might have to be replaced if it can no longer secure the recoil starter pulley. If damaged, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.

Rope won't retract or pulls out unevenly? This starter pulley assembly stores and releases the pull rope to engage your leaf blower's flywheel and motor.

Starter won't pull freely or rope doesn't retract? This recoil starter spring retracts the pull cord and activates your engine. Simple DIY repair in minutes.

Fan housing for leaf blowers. Covers and protects the cooling fan assembly. Replace if cracked, broken, or damaged to restore proper engine cooling.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

Flat washer for trimmers, blowers, and hedge trimmers. Replaces worn, missing, or damaged washers. Essential hardware for secure assembly and fit.

Fix your leaf blower's weak airflow or no air output with this impeller. Restores proper air velocity when damaged or worn. Moderate DIY repair.

Washer for grass line trimmers and leaf blowers. Replaces worn, missing, or damaged washers. Essential hardware component for secure assembly.

Assembly screw for grass line trimmers, leaf blowers, and pruners. Secures internal components and housing panels. Replace if stripped, missing, or damaged.

This part is a fuel cap assembly without the retainer piece. This part is used on trimmers and edgers. The purpose of a fuel cap is to keep the fuel in the tank and also to keep outside contaminants from getting into the fuel. This fuel cap is manufactured out of a high-quality black plastic material.A new fuel cap assembly will be needed if the existing one is cracked, broken, or damaged in any way. It's important to replace the fuel cap as soon as possible if this is the case so that contaminants cannot enter the gas tank. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This fuel cap assembly is a genuine Husqvarna part. It is sold individually. This particular fuel cap assembly is compatible with trimmers and edgers that are manufactured by Husqvarna and Weed Eater.

Seals the fuel tank with an airtight fit to prevent spills during operation. Replace if cracked, loose, or leaking. Verify fit with your model number.

Replace a cracked or leaking fuel tank that's causing fuel spills or preventing your leaf blower from running. Direct replacement fuel reservoir.

Replace a cracked or leaking fuel tank that's causing fuel spills or preventing your leaf blower from running. Direct replacement fuel reservoir.

Fix fuel leaks and engine starting problems with this fuel line fitting. Connects separated fuel line sections on trimmers, blowers, and chainsaws.

Delivers fuel from tank to carburetor in trimmers, blowers, and chainsaws. Replace if cracked, stiff, or leaking to restore proper fuel flow.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

Assembly screw for grass line trimmers, leaf blowers, and pruners. Secures internal components and housing panels. Replace if stripped, missing, or damaged.

If your leaf blower has reduced airflow or a cracked tube, this blower tube assembly restores full power. Direct-fit design makes installation quick.