Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Normally screws are found in many different types of appliances. These parts are important in holding different pieces together so that the user is able to operate the machine effectively. A new screw might be needed if some parts of the appliance are loose or missing from place.Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced. The repair for this screw is simple and will most likely require common household tools as well as pliers. This screw is made of durable metal made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.
This is a recoil starter pulley kit that can be used as a replacement for many different models of handheld trimmers and similar outdoor power equipment. The starter pulley is an important part of the starter mechanism in the engine. When the user pulls the rope to start the engine, the pulley will engage the flywheel, which will then allow the engine to start running. Owners might find that they need to replace the recoil starter pulley at some point. Over time and with a lot of use, this part can begin to wear down. Elements of it could break or wear away. If this happens, it will be difficult to get the engine started because the pulley will not properly engage the flywheels. Sometimes, it might be impossible to get the engine started at all. The owner will then need to replace the recoil starter pulley. This is a genuine OEM replacement part that is sold individually. The pulley can work with many models of pole pruner, string trimmer, and leaf blower. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro.
This recoil starter spring is what retracts the rope back into the main starter assembly. When the rope is pulled, the spring expands. The release of the rope triggers a retraction, which pulls the rope in and activates the starter, creating the chain reaction that starts the engine. This spring can get twisted or become hyperextended with regular use, in which case the only solution would be to replace the entire spring assembly. This OEM recoil starter spring is manufactured by Husqvarna, with high-quality standards in mind. It is compatible with Poulan, Weed Eater, and Husqvarna machines, including trimmers, leaf blowers, edgers, and pruners. Owners should always consult their parts diagram or owner’s manual for exact part number compatibility. This durable metal spring is designed from high-quality materials and is sold individually. The starter rope and other parts of the assembly are sold separately. Always disconnect the spark plug and wear gloves when performing engine work.
This part is discontinued by the manufacturer and is no longer available for purchase.
This starter rope tube is a genuine Husqvarna part, sold individually. This starter rope tube can be used as a replacement part in a leaf blower. This part houses the starter rope.The starter rope tube might eventually have to be replaced if it cannot hold the pull rope due to damage to the material of the tube. If the starter rope tube is punctured, dented, warped, or eroded to the point that the rope cannot pass through the tube or that a portion of the tube is exposed, the starter rope tube should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This starter rope tube is compatible with the following outdoor appliance brands: Husqvarna, Weed Eater, Craftsman, Poulan, and Poulan Pro.
This is a momentary switch kit is special switch that is used to turn the handheld leaf blower off and on. It's made of durable plastic that houses a switch with two tabs on the sides. Through time and use, the momentary switch kit can start to malfunction due to damage or wear and tear. When this happens, the momentary switch kit will need to be replaced. A broken switch kit will not allow a user to turn on and off the leaf blower.Replacing the momentary switch kit doesn't require the use of tools. A set of work gloves can be useful for the process. Make sure the engine is shut off, and the spark plug wire has been disconnected. Take off any covers needed to access the momentary switch. Remove the switch from the wires and install the new part.This is an authentic replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The momentary switch kit is designed for use with leaf blowers manufactured by Craftsman, Weed Eater, Poulan, and Poulan Pro.
This replacement part is a screw. This part is a genuine replacement part made by Husqvarna. Screws are small but important in many different types of machinery. Screws are able to hold different parts in place and help them stay secure during use so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is missing or damaged in any way. It is possible that the screw can become stripped over time and therefore not stay in place properly. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. Note that This is a genuine OEM replacement part.
This vacuum door cover is a genuine Husqvarna part, sold individually. This vacuum door cover can be used as a replacement part in a leaf blower. The purpose of the vacuum door cover in a leaf blower is to house and protect the area in and around the leaf blower's vacuum.If the vacuum door cover has been dented, cracked, punctured, torn, ripped, warped, or eroded to the point that the vacuum is exposed, the vacuum door cover should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This vacuum door cover is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.
This vacuum door spring is a genuine Husqvarna part, sold individually. This vacuum door spring can be used as a replacement part in a leaf blower. The purpose of the vacuum door spring in a leaf blower is to allow the opening and shutting of the vacuum door so that the door does not swing open of its own volition and remains shut while the appliance is in use.The vacuum door spring in a leaf blower might have to be replaced if it shows signs of damage that renders the spring incapable of producing its typical function during the standard use of the appliance. If the vacuum door does not remain shut due to damage, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This vacuum door spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.
This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.
This is a leaf blower fan blade, also called an impeller. This is what creates the flow of air out of the machine that blows leaves, grass clippings, and other debris out of the way. Without this part, the leaf blower would be unable to move air at all. The leaf blower fan blade is subject to some wear and tear through normal use. It is also made of plastic and may degrade over time, eventually cracking. If the leaf blower is not moving air and the engine is running normally, this could be the problem. Replacing the leaf blower fan blade will require opening the blower motor housing. Locate the fan blade, remove the Torx screws, and then remove the old impeller. Install the new one, replace the screws, and then reassemble the housing. This replacement fan blade is made from plastic with a metal sheath/insert. Note that this is an OEM part, and it is sold individually. It fits over 44 different Craftsman and Husqvarna gas-powered leaf blowers.
This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.
As a small engine fuel tank, this part is designed to ensure your engine is secure, vented, and has clean fuel at all times. Many fuel tanks come with a vented gap to prevent pressure or a vacuum from being created in the fuel system. If fuel is coming out of the cap, a replacement cap may be required. Maintenance should be done on the fuel tank if you notice leaking or see debris floating in the tank. Repairing a damaged tank can result in fuel contamination, leakage, or fire, so replacement is the favored option. If the tank is damaged or cracker, replacement is required. The fuel should be drained before starting with the replacement process. This fuel tank is designed to attach to leaf blowers manufactured by Weed Eater, Craftsman, and Poulan. The fuel tank is a genuine OEM component that comes directly from the manufacturer. It comes as an individual part and does not include a fuel filter. The part is white and weighs less than six oz with dimensions of 9 x 3 x 2.5 inches. Attaching a new fuel tank will require the use of a hex screwdriver.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.
Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.
Symptoms of a bad Fuel Line include:
This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.
This is an OEM replacement screw that is specifically designed to secure the fuel tank on select lawn and garden equipment. The fuel tank retainer screw is made of durable metal and will be screwed to the fuel tank and the body of the machine, holding the tank in place and preventing it from being exposed to excessive vibrations or potential spillage. These screws can become worn over time or be lost in the process of other repairs. This genuine OEM fuel tank retainer screw is compatible with hundreds of trimmers, blowers, edgers, and pruners. It can be used with select models of machines from Poulan, Husqvarna, Weed Eater, and Jonsered. Owners should check their parts diagram for exact placement and part number compatibility as fuel tank retainer screws come in different lengths and diameters, so they are model-specific. This screw is made of durable metal and will require a Torx driver to install. The fuel tank retainer screw includes a built-in washer and is sold as an individual unit. Those who need more than one will have to purchase multiple quantities.