Dishwasher Condensate Overflow Float Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10274880
Fix a dishwasher that stops mid-cycle with a blinking start light. This door interlock switch restores reliable operation. 20-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Kenmore ultra wash dishwasher worked great for 18 months; then would not run start button blinked 3 times and nothing happened Nick C. • Safety Harbor , FL • November 12, 2015
Looked online, appeared to be door switch or control panel. Tried door switch first, a $30 part. Installed new door switch and washer started right up and appears to be fixed. Have not tried full wash cycle yet, but problem appears to be fixed. I decided to buy part from AppliancePartsPros.com because I could return the part if it did not correct the problem, no one else offered such a deal. I will only deal with AppliancePartsPros in the future, they were extremely helpful on the phone!
Read more
More
$50.57
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002363
Fixes dishwasher overfilling or not filling properly. This float rises with water to signal when the tub is full. DIY-friendly repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Runs but will not fill with water Michael K. • Las Vegas , NV • January 25, 2020
I first installed the inlet pump with no results. I then ordered a Control Switch and Float and Nut. This fixed the problem. Everything comes out so clean. I also replaced the filter which allowed me to clean debris around old filter. It is also easier to replace all these parts with the dishwasher pulled out and tilted on its side. I had to pull mine out to unplug power to the dishwasher.
Read more
More
$5.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3376397
Fix dishwasher overfilling or not filling with water by replacing the float assembly. Common issue with sticky buildup preventing proper operation.
Do-It-Yourself Stories from Customers like You
Inadequate cleaning of dishes / detergent residue all over the interior Randy N. • Elkhart , IN • September 19, 2015
I cleaned all the jet nozzles with a toothpick and a pipe cleaner to remove the hard water deposits. I then replace the ring bearing under the bottom spray wand and the ring bearing under the upper spray wand. I also replaced the smaller radial ring bearing. Although none of them looked overly worn, it doesn't take much to cause the spray wands to spray inadequately.
Then, I replaced the float and washer assembly. Although it appeared to work properly when I lifted up on it and let it down, it...
Read more
More
$73.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WD49X23818
The Funnel Service Kit is an OEM replacement part for GE dishwashers. It includes a water inlet funnel and seals necessary for proper water flow within your dishwasher. This part helps prevent leaks and ensures that water is properly directed into the dishwasher.
Symptoms of a faulty water inlet funnel service kit include:
- Water leaks from the dishwasher
- Insufficient water flow during the wash cycle
- Inconsistent cleaning or rinsing performance
Causes of a bad water inlet funnel service kit can include wear and tear over time, blockage from debris or mineral buildup, or damage to the funnel or associated components. If you notice issues such as water leaks, inadequate water flow, or inconsistent cleaning results, it may be time to replace the old or damaged water inlet funnel service kit with this genuine OEM part.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
More
$48.34
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Bosch part
By: Bosch
Part Number: 00263833
Fix a dishwasher that won't fill, overfills, or leaks from the base. Water inlet valve controls flow into the tub. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Horrible smell when running a cycle Aaron H. • Los Angeles , CA • January 13, 2017
Bacteria buildup in the venting assembly and drain hose. Replaced them and it's back to normal
Read more
More
$141.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Bosch part
By: Bosch
Part Number: 00165301
The Float is an OEM part for Bosch dishwashers. This float senses water levels inside the dishwasher, signaling the inlet valve to refill when needed.
Causes of a float malfunctioning can be mineral deposits accumulating and weighing it down over time, or cracks in the plastic housing allowing water in.
Symptoms of a bad float include:
- The dishwasher not filling or filling slowly
- Error codes related to fill issues
- Improper water levels impacting wash results
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Flood switch was stuck in on position drain pump would not turn off. Rick V. • Burlington , IA • April 05, 2017
Replaced the defective float switch.
Read more
More
$7.69
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Bosch part
By: Bosch
Part Number: 00166635
Wax motor for detergent/rinse-aid dispenser.
Do-It-Yourself Stories from Customers like You
Soap dispenser door wouldn't open David H. • San Francisco , CA • May 15, 2015
Took door off, saw that dispenser linkage was ok, I could open and close by hand, so figured the wax motor or the wiring to it were most likely the problem. I took off the wax motor ( actuator) and ran 120 volts to it via jumper wires, and it did not move at all, so figured good chance that was the problem. Found part # on your site, received new one quickly from you, put it in and works great. Thanks.
Read more
More
$29.68
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Bosch part
By: Bosch
Part Number: 00499500
This pressure chamber is part of the water level sensing system in the dishwasher. It connects to the tub and the water level sensor, using air pressure changes to detect how much water has filled the machine so it knows when to stop filling. Replace this component if the dishwasher overfills, underfills, or displays water level error codes during a wash cycle.
Do-It-Yourself Stories from Customers like You
Internal water leak on a bosch shu5316 uc/06 dishwasher David B. • Aspinwall , PA • March 13, 2015
Using instructions I obtained over the internet, I first removed the DW's bottom cover panels so I could look inside the DW (with a flashlight) while it was running. I had to put their dishwasher through several wash cycles before I could pinpoint the location of the leak. (The water appeared to be coming from above on the left side of the DW, near the top, rear of the DW's blue "Pressure Chamber." Thinking that the problem likely lay in either a malfunctioning Pressure Chamber or in a...
Read more
More
$60.55
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Lg part
By: Lg
Part Number: AJU33450703
Fix a dishwasher that won't fill or overflows with this water inlet valve. Solves filling issues and stops leaks. Moderate DIY repair in 30-45 minutes.
This part fixes the following symptoms
-
Will not fill with water
-
overflowing
See more...
Do-It-Yourself Stories from Customers like You
Error code: EF in flow water valve would not close so water continued flowing in when power switch was turned on Mike G. • Jurupa Valley , CA • June 11, 2021
I replaced the valve.
Read more
More
$126.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WD15X10010
Dishwasher not filling with water or leaking? This water inlet valve controls water flow during the fill cycle. DIY-friendly replacement.
Do-It-Yourself Stories from Customers like You
No water in dishwasher Carroll F. • Newton , IA • March 17, 2017
Replaced water value, like a walk in the park.
Read more
More
$57.26
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10077871
Fix leaking dishwasher or water overflowing onto the floor. This float assembly rises with water level to prevent overfills. Easy 5-10 minute repair.
Do-It-Yourself Stories from Customers like You
Leaking under right side Glen G. • Laplata , MD • December 06, 2015
Removed front kick plate, found overflow valve assembly leaking . When parts arrived removed and replaced overflow valve. Took about 10 minutes
Read more
More
$51.62
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WD12X10048
Dishwasher overflowing or leaking? The float stem connects your tub float to the switch that stops water flow. Quick 15-minute DIY fix for most models.
Do-It-Yourself Stories from Customers like You
Flood switch defective flooded the floor Douglas B. • Portland , MI • January 09, 2017
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows.
Read more
More
$35.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WD12X334
Fix dishwasher overflows or underfilling with a new water level float. This part regulates filling by rising with water to signal the switch.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$12.49
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WD15X10009
Fix dishwasher water leaks or no water flow issues with this water inlet valve. Controls water fill during wash cycles. DIY-friendly replacement.
Do-It-Yourself Stories from Customers like You
No water, insufficient water Donald D. • St.Albans , VT • October 07, 2018
Replaced water valve. Using parts pro parts and you tube.
Read more
More
$74.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 154852501
This is the user control and display board located on the front panel of the dishwasher. It contains the buttons, display, and interface circuitry that allow you to select wash cycles, options, and monitor cycle status. Replace this board if the display is blank or flickering, buttons are unresponsive, or the dishwasher does not respond to cycle selections.
Do-It-Yourself Stories from Customers like You
Dishwasher electronics experiencing intermittent failures then complete failure i had power to the control board but no lights on panel etc Stephen H. • Fort Lauderdale , FL • July 12, 2016
I spoke with one of your sales people... ordered the control board and also the button board... ( for $50.00 , I'll replace it too while I'm in there ) .. The boards were here the next day, I installed them and the machine works better than ever ! Easy fix... outstanding sales lady, immediate delivery.
Read more
More
$113.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Samsung part
By: Samsung
Part Number: DD82-01588A
Not getting water in your dishwasher or water keeps running? The water inlet valve controls flow and prevents leaks. Common DIY repair fix.
More
$161.95
IN STOCK
Most orders arrive by Tuesday, November 24