Dishwasher Float Switch Float Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10322576
Converting your portable dishwasher to built-in? This conversion kit includes all mounting hardware and adapters needed for permanent installation.
More
$101.95
- Compare At:
-
$121.32
- You Save:
-
$19.37
Genuine Ge part
By: Ge
Part Number: WD21X24063
Dishwasher won't start or stops mid-cycle? This door latch microswitch signals the control when the door is securely closed. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Door latch on my dishwasher snapped into small pieces Gerratt B. • Nephi , UT • November 30, 2016
I had an appliance repair company come look at my GE dishwasher. It wasn't three years old but he told me the parts were discontinued. Afterwards I checked for myself and GE has discontinued them! AAARRRGGGHHH! Well AppliancePartsPros has them! Thank goodness. I even installed it myself!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 154887201
Fix a dishwasher that won't start, has no lights, or only runs certain cycles. This switch assembly restores proper signaling to the control board.
Do-It-Yourself Stories from Customers like You
The dishwasher made a pop noise and the lights went out. Roger D. • Clarkston , MI • November 27, 2023
I replaced both the control board and the switch board. I watched the video on how to replace the control board and it was spot on.
Read more
More
$67.95
- Compare At:
-
$81.54
- You Save:
-
$13.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4314961
Color: Black. Instruction sheet included.
Do-It-Yourself Stories from Customers like You
The dense pack rocker switch on our whirlpool compactor broke after 28 years Jane G. • Hubbardston , MA • August 21, 2016
Removed rocker switch,made up jumper so the compactor could be used while awaiting replacement switch. The part came 2 days later and was installed in less tha 5 minutes. Unit working like new again. Thanks for the great service!!
Read more
More
$53.21
- Compare At:
-
$63.32
- You Save:
-
$10.11
Genuine Frigidaire part
By: Frigidaire
Part Number: 154622001
This drain valve controls the flow of water out of the appliance to remove standing water and prevent overflow. Replacing a faulty valve restores normal draining and helps stop pooling or persistent drain error symptoms. What it does:
- Opens and closes to release water from the appliance drain path.
- Works with the pump/drain line to move water out during cycles.
- Common issues indicating failure: appliance won't drain, water pooling, or intermittent drain errors.
- Fits as the direct replacement component for the OEM valve in affected models.
What's included: One drain valve. Install notes:
- Disconnect power and turn off the water supply before starting work.
- Expect residual water in hoses; have towels and a pan ready to catch spills.
- Remove and replace using basic hand tools; keep clamps and seals secure to avoid leaks.
Do-It-Yourself Stories from Customers like You
Drain valve indicator on Stephen S. • Anniston , AL • July 27, 2014
Replaced the drain valve. duh. here's the kicker...original problem was circulation pump was broken. Paid $350 to have it "professionally" fixed, and when we turned it on, it wouldn't run, so "professional tech" said "it must be the control panel". So I say maybe, send him away, checked the indicator panel and sure enuf, drain valve light. So I ordered it here, replaced the valve, and it ran really funky with weird noises, Then water starts leaking under dw. So I figured I did something...
Read more
More
$126.37
- Compare At:
-
$149.12
- You Save:
-
$22.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 807445903
Fix I10, I20, or I30 error codes and slow water filling with this dishwasher water inlet valve. Stops mid-cycle failures and prevents leaks. DIY install.
Do-It-Yourself Stories from Customers like You
Frigidaire gallery series I10 I20 & I30 error codes Daniel T. • Dryden , NY • October 27, 2018
After reviewing a few blogs it was clear that Frigidaire is knows there is a problem. One of the blogs recommended AppliancePartsPros.com for a new pressure sensor switch and a water inlet valve. Ordered the part and it was shipped that day, as promised. Pulled the dishwasher out (which was the hardest part of the repair). The pressure sensor switch is a changed out with a small flat blade screw driver to release two snap clips. The inlet valve is changed out with three screws and on hose...
Read more
More
$100.95
- Compare At:
-
$119.18
- You Save:
-
$18.23
Genuine Ge part
By: Ge
Part Number: WB24K5085
Fixes F1 or F2 error codes and prevents overheating in ovens. This safety switch monitors temperature limits to protect components. Direct fit part.
Do-It-Yourself Stories from Customers like You
It would show a message of f2 after the oven had been on for about 15 20 minutes Elaine M K. • Pottstown , PA • November 09, 2015
We purchased a part called Limit Switch from you. It totally corrected the problem.
Read more
More
$55.36
- Compare At:
-
$65.32
- You Save:
-
$9.96
Genuine Ge part
By: Ge
Part Number: WD12X445
Fix dishwasher overfilling or not filling properly with a new float dome. Protects the float sensor for accurate water level control. Easy 15-minute repair.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$15.52
- Compare At:
-
$18.62
- You Save:
-
$3.10
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8274220
Replacement water inlet valve that controls water flow into the refrigerator's dispenser and ice maker, restoring proper filling and preventing overflows. Direct-fit design replaces the original valve on compatible Whirlpool refrigerators. What it does:
- Regulates water flow from the household supply to the refrigerator dispenser and ice maker.
- Opens when the dispenser or ice maker calls for water and closes to stop flow and prevent overfilling.
- Common symptoms: no water from the dispenser, slow/weak fill, ice maker not filling, or water leaking at the valve.
- Designed to match the original valve's function and plumbing connections for straightforward replacement.
What's included: One water inlet valve. Install notes:
- Disconnect power to the appliance and shut off the water supply before starting any work.
- Use basic hand tools to remove and reinstall mounting screws and water line fittings; support lines to avoid stress on fittings.
- Inspect and replace any damaged O-rings or supply tubing; tighten fittings securely but avoid overtightening.
- After installation, turn water on slowly, check all connections for leaks, then restore power and verify dispenser/ice maker operation.
Do-It-Yourself Stories from Customers like You
Dishwasher wash not filling with water Richard D. • Old Forge , PA • December 19, 2014
Changed inlet valve super easy on my whirlpool dishwasher took the front kick panel off turned off water and electricity the valve was right out front bottom left one small sheet metal screw held it on disconnected plug and 5/8 water line and hose with clamp for fill to tub just reverse for install of new valve
Read more
More
$114.95
- Compare At:
-
$138.59
- You Save:
-
$23.64
Genuine Bosch part
By: Bosch
Part Number: 00092188
Dishwasher not filling with water or soap not dissolving? The water inlet valve controls water flow into your dishwasher. Takes about 1 hour to replace.
This part fixes the following symptoms
-
overflowing
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher would not clean dishes soap compartment would open but soap still in compartment Rodney K. • Honolulu , HI • October 02, 2014
The indications made me think the dishwasher was not shooting water. I checked the water valve with a voltmeter and it was getting power to open. I disconnected the line to make sure the water line was not plugged. Then I bypassed the door switch and ran the dishwasher with the door open and did not see the water filling which pointed to the inlet valve. I ordered the valve which came quickly. Replaced the valve and now the dishes are clean!
Read more
More
$234.42
- Compare At:
-
$281.30
- You Save:
-
$46.88
Genuine Lg part
By: Lg
Part Number: 4975DD1001A
This guide assembly is the track that supports and directs a dishwasher rack as it slides in and out. Replace a worn or damaged guide to restore smooth rack movement, alignment, and reliable loading. What it does:
- Provides the sliding path that supports and guides the dishrack
- Maintains rack alignment to prevent derailment
- Helps the rack extend and retract smoothly without binding
- Common symptoms: rack hard to slide, tilts or falls off track, scraping/grinding noises, visible cracks or broken tabs on the guide
What's included:
Install notes:
- Disconnect power and shut off water before servicing the dishwasher
- Pull the rack out and remove any end caps or stops to access the guide
- Release locking tabs or screws, note orientation, and swap the old guide with the new one
- Reinstall stops/end caps and test rack travel for smooth operation
Do-It-Yourself Stories from Customers like You
Drain hose had a crack and the guide assembly looked bad Mike L. • Oxford , FL • March 07, 2018
I replaced both items. And it was easier than I thought.
Read more
More
$128.67
- Compare At:
-
$154.40
- You Save:
-
$25.73
Genuine Ge part
By: Ge
Part Number: WB24K5022
Oven light switch.
Do-It-Yourself Stories from Customers like You
Rocker switch failed in the "on" position had to get a ge part for a magic chef oven John B. • Seabrook , TX • January 25, 2016
Slid the oven out. Opened the control panel. Shut the power off. Replaced the switch. reversed the steps.
Read more
More
$38.95
- Compare At:
-
$45.96
- You Save:
-
$7.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4171000
Fix a dishwasher that won't fill or leaks water with a new inlet valve. Common repair for filling issues and water seepage. DIY-friendly replacement part.
Do-It-Yourself Stories from Customers like You
Dishwasher would not fill Kenneth M. • Clarkston , MI • November 14, 2015
Performed diagnostic continuity tests on fill valve and overflow switch as recommended. Fill valve continuity test failed. Ordered part Saturday, shipped the following Monday, in my hands by the following Wednesday, installed and operational by Thursday. Great service! Thanks.
Read more
More
$103.39
- Compare At:
-
$123.03
- You Save:
-
$19.64
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8519552
Fix dishwasher overflows or won't fill issues. This water level float detects proper fill levels. Replaces broken or stuck floats causing drainage problems.
More
$54.95
- Compare At:
-
$65.25
- You Save:
-
$10.30
Genuine Frigidaire part
By: Frigidaire
Part Number: 154246402
This small check ball helps control water flow inside the refrigerator's water/ice system to prevent backflow and ensure proper filling. It restores reliable water seating where valves or distributor ports use a ball-style check. What it does:
- Acts as a one-way seal to stop water from flowing backward into the supply line or valve bore
- Helps the ice maker and dispenser fill correctly by allowing water in but not back out
- Common symptom: intermittent or incomplete ice maker fills
- Common symptom: slow or continuous dripping from dispenser or valve area
What's included: One check ball. Install notes:
- Shut off water supply and unplug the appliance before starting
- Small part — handle carefully and note orientation/seat before removal
- Inspect valve bores and seals for debris; clean area before installing new check ball
Do-It-Yourself Stories from Customers like You
Dishwasher needed a refresh Darron T. • Sherman , NY • April 17, 2017
I ordered new racks, volute and check ball, and new spray arms. Replacing the volute and check ball were the hardest things to do and they were fairly easy to change. The toughest part for me was finding my T15 torxdriver. After replacing these parts the washer operates much better with much higher pressure than what we were experiencing recently.
Read more
More
$57.39
- Compare At:
-
$68.29
- You Save:
-
$10.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304475606
This push-button door switch detects when the appliance door opens and closes, enabling the interior light and informing the control system. Replacing a faulty switch restores normal door-sensing and light operation. What it does:
- Activates the interior light when the door opens and turns it off when closed
- Sends a door-open/closed signal to the appliance control so timed features behave correctly
- Commonly replaces a switch that causes the light to stay off or fail to turn off
- Helps eliminate intermittent lighting or door-sensing problems
What's included: One door switch (push-button) Install notes:
- Disconnect power before starting any repair to avoid shock or injury
- Access may require removing the light housing or door trim; keep fasteners for reassembly
- Verify the old switch matches this part number and connector style before installing
More
$79.31
- Compare At:
-
$94.38
- You Save:
-
$15.07