Frigidaire 807445903 Water Inlet Valve (Ice/Water Dispenser) OEM Part

After reviewing a few blogs it was clear that Frigidaire is knows there is a problem. One of the blogs recommended AppliancePartsPros.com for a new pressure sensor switch and a water inlet valve. Ordered the part and it was shipped that day, as promised. Pulled the dishwasher out (which was the hardest part of the repair). The pressure sensor switch is a changed out with a small flat blade screw driver to release two snap clips. The inlet valve is changed out with three screws and on hose clamp. Once the parts were in place the dishwasher is working as it should.

Checked existing inlet valve ohms, the meter didn't work correctly making me think my valve was bad. upon receipt of a new one ordered from APP, re-checked ohms found meter bad, and determined must be an issue other than my inlet valve. I then read the service bulletin about issues with pressure switch and the need for an additional 'cover' when replacing. so I just cleaned the hole to the pressure switch from the sump area with 3-4 q-tips, flushed with some extra water (turkey baster), and voila, the dishwasher has been working great (like new), no error codes, full cycles, dishes even cleaner -- for over 1 month. so moral is for Frigidaire and related dishwashers have an issue with the pressure switch, so before replacing anything, just clean the sump hole to the pressure switch (left front-most 3/16" hole in the sump on our model). Nonetheless, APP was great and super-quick on shipping will absolutely use them again.