Microwave I Insert Plate Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11025649
Wall mounting plate that secures and stabilizes your over-the-range microwave. Replace if cracked, bent, or missing for safe, proper installation.
Do-It-Yourself Stories from Customers like You
Bought a display model and it did not have the mounting bracket or any other hardware Aj H. • San Antonio , TX • September 03, 2014
Ordered mounting bracket but was surprised to find that the bracket model number had changed many times from the manufacter date of the microwave vent unit. Was hesitant if I was ordering the right part but I trusted the cross referencing of appliance parts pro and I got the exact bracket that I needed
Read more
More
$23.61
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 8184109
The Motor Spacer is an OEM part for Whirlpool microwaves. It is designed to support and position the turntable motor, ensuring it stays aligned and functions correctly. This spacer helps maintain the stability of the turntable, allowing even and consistent heating of food.
Causes of a bad motor spacer can include wear and tear over time, physical damage from heavy use, or misalignment due to accidental impacts. Regular inspection and maintenance can help identify issues before they lead to motor malfunction.
Symptoms of a bad motor spacer include:
- The turntable not rotating properly
- Unusual noises coming from the turntable area
- Inconsistent heating or cooking of food
- The turntable being unsteady or wobbling
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The turntable in the microwave stopped going around. David J. • Happy Valley , OR • November 20, 2017
Very easy fix. Unplugged microwave, then lowered bottom panel, removed the two leads to the turntable motor, removed two screws attached to motor, removed old motor, put new spacer on motor stem, installed motor with same two screws, reattached the two wires, reattached panel ( after cleaning all the grease that built up over the last 6 years), plugged microwave in and good as new! Took me twenty minutes. Note: the two screws holding the motor were not Phillips like those holding the panel. So...
Read more
More
$5.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB56X35363
The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.
Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.
Symptoms of a bad Mounting Plate include:
-
Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.
-
Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.
-
Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
More
$18.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Samsung part
By: Samsung
Part Number: DE70-00561A
The Microwave Plate Mounting Bracket is designed to securely hold the turntable plate in your microwave, ensuring smooth and consistent rotation during use. This genuine OEM part guarantees a perfect fit and reliable performance, maintaining the stability and functionality of your Samsung microwave. Crafted from durable materials, the mounting bracket withstands daily use and prevents wear and tear, extending the life of your appliance. Installation is straightforward, allowing you to quickly replace a damaged or broken bracket without the need for professional assistance. By choosing this authentic part, you ensure that your microwave operates efficiently and safely, providing a seamless cooking experience. Whether your original mounting bracket is cracked, missing, or no longer functioning properly, the Microwave Plate Mounting Bracket is the ideal solution to restore your microwave's performance and keep your kitchen running smoothly.
Do-It-Yourself Stories from Customers like You
I was missing the mounting bracket George W. • Franklin , NC • April 12, 2016
I ordered the part and it was there in three days. I was so happy to get it and make the wife happy.
Read more
More
$47.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509438
Support ring installs beneath the microwave turntable to provide stable, balanced rotation. Replace if cracked, broken, or missing for proper use.
Do-It-Yourself Stories from Customers like You
Microwave had no plate to turn Stanley W. • Murfreesboro , TN • March 04, 2017
I ordered a plate and support roller from you and it came within two days, unbelievable. My wife was very happy that now she could use her microwave again. The original plate broke. When it arrived I could not believe how well it was packed. You could have dropped it from the empire state bldg. in N Y and would not have broken. The gentleman I spoke with, Nathan I believe, is an excellent representative of your company. Very professional and personable. Thank You so much. You can be sure I will...
Read more
More
$56.41
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB01X45506
This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:
- Secures panels, brackets, or component mounts to restore proper alignment and support
- Stops rattling, vibration, or loose hardware caused by damaged or missing rivets
- Provides a durable mechanical fastener where original rivets have sheared or loosened
- Helps maintain safe operation by keeping parts properly retained
What's included: One rivet assembly Install notes:
- Disconnect power (and gas/water if applicable) before attempting any repairs
- Removal may require drilling out the old rivet; installation typically needs a rivet gun or equivalent tool
- Keep hardware orientation the same as the original; replace any damaged surrounding parts
Do-It-Yourself Stories from Customers like You
Ge microwave: sparking melted hole in stirrer fan cover and it would not run without sparking Henry H. • Swanton , OH • September 10, 2016
I replaced the stirrer fan cover and fan, which had some carbon and slight burn marks on it. It was difficult to remove the fan cover as it did not rotate. I had to pry it off with a flat blade screwdriver, breaking the plastic tabs on the cover (which was being discarded anyway). I then cleaned any visible carbon deposits and replaced the cover and fan, using the old stirrer fan holder as it appeared OK. However, I was unable to rotate the cover into the locked position so I could not insert...
Read more
More
$9.79
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB56X10446
Rear wall mounting plate bracket that supports over-the-range microwaves during installation. Replace if bent, broken, or missing for secure wall mount.
Do-It-Yourself Stories from Customers like You
Bought a used ge profile microwave without a wall plate and it was missing a nut holder Michael M. • Lansdale , PA • October 31, 2014
Bought these two pieces through Appliance Parts Pro - they matched exactly at half the cost. Shipped same day.
Read more
More
$98.23
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: 3300W0A030A
Metal mounting plate that secures the microwave chassis to the wall or cabinet. Replace if bracket is bent, cracked, or missing during installation.
Do-It-Yourself Stories from Customers like You
Missing mounting bracket and hardware. Stephen H. • Fort Myers , FL • January 01, 2021
Ordered it from you.
Read more
More
$148.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509642
This is a small support bracket that holds the cooking rack or shelf in place inside the microwave. It mounts to the interior cavity wall and keeps the shelf level during use. Replace this part if your microwave shelf is wobbly, tilting, or no longer stays in position.
Do-It-Yourself Stories from Customers like You
No display didn't do anything. Craig B. • Brooksville , FL • December 21, 2017
Looked at schematic on AppliancePartsPros.com. Checked power, power filter, next component in line was the thermostat, found thermostat with signs of overheating, thermostat was open, replaced the thermostat, micro works perfect. Took longer to get it out than diagnose it.
Read more
More
$23.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304520948
Replacement wall mounting plate for over-the-range microwaves. Secures microwave to wall studs. Order if original plate is damaged, bent, or missing.
Do-It-Yourself Stories from Customers like You
I am a contractor remodeling a kitchen fire. The bracket for the microwave was damaged during demo. Harold L. • Tallahassee , FL • December 01, 2020
We ordered the bracket and were able to save the client money by not having to buy
Read more
More
$78.65
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11684510
Replacement mounting bracket that secures internal microwave components. Restores proper alignment and stability. Ideal when original is cracked or broken.
More
$9.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 8206525
Plastic spacer that positions and secures the microwave door frame assembly. Replace if cracked, broken, or missing to restore proper door alignment.
Do-It-Yourself Stories from Customers like You
Microwave door handle broke. Linda R. • Lakeville , MN • January 06, 2019
Bought a replacement door handle and 3 new spacers.
Read more
More
$5.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB06X10797
Replacement support plate for microwaves. Restores secure mounting and fit when original is bent, cracked, or missing. Stops rattles and misalignment.
More
$13.39
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 8206385
Molded wire clip that secures wiring and harnesses to the microwave cabinet. Replace if broken, cracked, or missing to prevent wire rubbing and chafing.
More
$25.52
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Samsung part
By: Samsung
Part Number: DE66-20095B
Button locking mechanism secures control panel buttons in your microwave. Replace if broken, loose, or missing to restore proper button alignment and feel.
Do-It-Yourself Stories from Customers like You
Stirrer cover partially melted. Mark R. • Allen , TX • July 27, 2020
Once I figured out what this was, I saw a video on replacing it. Was super easy and I found the parts on Appliance Parts Pros. Ordered it and got it in a few days. Popped it in and it was good to go. After my wife accidentally melted the cover, I thought I was going to have to trash it and get a new one. Saved myself hundreds of dollars by doing a little research. I’ve used Appliance Parts Pros many times and everything from them has been great!
Read more
More
$11.59
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB01X10105
Teflon cushion for microwaves. Installs as a protective buffer between moving parts. Replace if worn, cracked, or missing to prevent friction damage.
More
$3.71
IN STOCK
Most orders arrive by Wednesday, November 25