Range Hood Slow Clamp Snowblower Engine Foil Parts
Genuine Ge part
By: Ge
Part Number: WB02X11026
Secures the fan blade to the motor shaft, preventing vibration and noise. Replace if blade is loose or clip is missing to restore proper airflow.
Do-It-Yourself Stories from Customers like You
Plastic fan blade broke while being cleaned Margaret R. • Murrells Inlet , SC • April 30, 2017
Removed the brackets that sheltered the fan blade, removed the fan clip (was a little difficult but a needle nose plier was helpful), removed broken fan blade collar. Attached new fan blade and clip. Getting the new fan blade seated on the stem was difficult. I used a socket (so that the stem had room to move down onto the fan) and a rubber mallet on the socket to achieve a complete seating. Reattached brackets. Also ordered a charcoal filter to replace the standard filter. The charcoal...
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00414836
This is a genuine OEM replacement o-ring sourced directly from the manufacturer for use on range vent hood switches. The o-ring provides a tight seal for the switch and keeps smoke from escaping through the switch connection. If the o-ring becomes worn or damaged, the vent will not remove smoke during cooking and should be replaced. Heat and debris pulled through the vent may cause the o-ring to warp. O-rings are not designed to last forever and may need to be replaced during the life of the appliance to keep it functioning correctly.To start, disconnect the power to the vent hood and dismantle the vent in order to reach the switch. To start, disconnect the switch and locate the o-ring. Remove the old one and dispose of it. Place the new o-ring in the groove and press firmly to seal the part. Lubrication is not necessary for installing the new o-ring. Reassemble the switch and put the vent hood back in place. Connect the power and try the switch to make sure it works. This o-ring is made of heavy-duty black rubber is and sold individually. It is designed for use in range hoods manufactured by Thermidor.
Do-It-Yourself Stories from Customers like You
Broken downdraft switch James S. • Sunnyvale , CA • May 03, 2018
Found replacing the switch to be doable, but it was quite a delicate operation. This was for a Thermador range with a broken downdraft switch. It required the removal of 5 small screws which could easily be fumbled and dropped down where it would be difficult, if not impossible to retrieve. Two of the screws were facing the back, so it was a blind operation to remove and replace the screws. Required an offset screwdriver, as space was tight. So, be EXTREMELY careful to not drop the screws and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02K10073
Secures the thermostat sensing bulb to the oven cavity wall for accurate temperature control. Replace if missing or damaged to prevent sagging bulb.
More
Genuine Broan part
By: Broan
Part Number: S99420472
This is a plastic retainer clip that holds the grease or charcoal filter in place inside a range hood. It snaps into the hood housing and keeps the filter securely mounted during operation. Replace this part if your filter is loose, rattling, or falling out of position.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10386347
Secures your range hood filter housing to keep the filter seated and properly sealed. Replace if the latch is broken or worn. Confirm fit with your model.
More
Genuine Bosch part
By: Bosch
Part Number: 00411008
This is a cable strap used to secure and organize wiring within a range vent hood. It holds cables in place to prevent them from interfering with the fan motor or other internal components. Replace this strap if the original is broken, missing, or no longer holding cables securely in position.
More
Genuine Bosch part
By: Bosch
Part Number: 00414839
Silicone seal with adhesive for range hood installation. Replace when damaged, worn, or losing adhesion to maintain proper ventilation seal. Verify fit.
More
Genuine Bosch part
By: Bosch
Part Number: 00415298
Genuine Ge part
By: Ge
Part Number: WB02X10398
Genuine Ge part
By: Ge
Part Number: WB02X11042
Secures the grease filter inside your range hood. Replace if broken, loose, or missing to keep the filter properly positioned during operation.
Do-It-Yourself Stories from Customers like You
Light under the range hood stopped working. I determined that the light assembly was bad and decided to replace both. Edward B. • Mobile , AL • March 20, 2021
Unplugged broken lamp assemblies, and plugged in the new replacement parts.
Read more
More
$8.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00412296
This clip secures the upper dishwasher rack to its sliding assembly so the rack stays properly aligned and rides smoothly. A small but essential part for restoring stable upper-rack operation and preventing sideways wobble. What it does
- Holds the top/upper rack in place on the track or rail assembly
- Prevents the rack from shifting, sagging, or detaching when loading or pulling out the rack
- Restores correct rack alignment to help dishes load and wash evenly
- Simple replacement for common rack-tilt or rack-drop symptoms
What's included
- One replacement rack top clip
Install notes
- Basic hand tools may be required; inspect surrounding components for related wear
- Remove power to the appliance and follow manufacturer safety guidance before servicing
- If the clip is brittle or broken, replace matching clips on the same rack for even support
More
$10.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00414838
Replace your worn range hood silicone seal to restore a tight fit and prevent grease leaks. Adhesive-backed for easy installation. Verify fit with your model.
More
$81.30
Out Of Stock
Usually ships within 4 - 14 days
Genuine Broan part
By: Broan
Part Number: SV03686
Secure mounting clip for range hood installation. Replace if loose, damaged, or missing to ensure proper hood stability. Verify fit with your model number.
More
$40.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB2K36
Secures your range power cord at cabinet entry to prevent wire damage and disconnection. Replace if cord is loose or clamp is cracked. Confirm fit with your model number.
More
$4.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR01X10300
$6.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Broan part
By: Broan
Part Number: S99100441
$38.88
Out Of Stock
Usually ships within 4 - 14 days