Refrigerator Drum Support Roller Parts
Genuine Ge part
By: Ge
Part Number: WR2X7877
Leveling leg threads into the refrigerator base to support and stabilize the cabinet. Replace if cracked, broken, or worn to keep your unit level.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316272900
This factory screw secures panels, brackets, and other components in your cooking appliance. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and keep parts properly aligned during use.
- Fastens components to maintain proper alignment and stability
- Helps prevent vibration, rattling, and loose parts during operation
- Replace if threads are stripped, the head is damaged, or the screw is missing
- Commonly used to mount internal or exterior parts in ranges and wall ovens
Includes: 1 screw Installation notes:
- Disconnect power and allow the appliance to cool; shut off gas supply if applicable
- Use the correct driver bit to avoid stripping the screw head
- Install in the original location and do not overtighten
- If the receiving threads are damaged, repair or replace the mating part before installation
Do-It-Yourself Stories from Customers like You
Foot broken Joel K. • Hollidaysburg , PA • February 20, 2018
Bolt replaced.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304528813
The Freezer Leveling Leg is an OEM part for Frigidaire upright freezers. It stabilizes and balances the appliance on uneven surfaces.
Causes relate to typical bearing wear from years of weight support. Rust forms without protective finish. Cracks develop from impact damage.
Symptoms of compromised leveling legs include:
- Excessive vibrations, noise or shaking during compressor operation
- Doors that no longer close or seal properly
- Ice maker malfunctions on frost-free models
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304528815
Adjustable leveling foot for refrigerators and freezers. Installs at the base to stabilize and level the appliance. Replace if cracked or broken.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11177593
Adjustable leveling foot that supports and stabilizes your refrigerator. Replace if worn, broken, or missing to eliminate wobbling and vibration.
Do-It-Yourself Stories from Customers like You
Leg leveler William G. • Caledonia , MI • July 31, 2026
The bracket that held the leveler was stripped. Replaced it and while I was at it, replaced the leveler, too.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10138054
This replacement roller fits the front or rear position of a slide mechanism, restoring smooth, even movement and reducing noise when a wheel is worn or broken. It helps racks or drawers glide properly and stay aligned. What it does:
- Provides low-friction rolling support for the slide track
- Helps slide-out assemblies move freely without binding or scraping
- Worn or damaged rollers can cause sticking, squeaking, or uneven travel
- Restores proper alignment and smooth operation when replaced
What's included:
Install notes:
- Disconnect power and allow the appliance to cool before servicing
- Remove the slide-out assembly; note roller orientation and hardware
- Transfer/reuse existing screws, clips, or retainers as required
- Do not lubricate unless the manufacturer specifies a lubricant
Do-It-Yourself Stories from Customers like You
12 year old 48" Kitchenaid refrig with flat/broken wheels Winston E. • Vista , CA • May 17, 2019
Ordered, wheels, pivoted it up to either side, pried out existing broken front wheels, tapped in new wheels. Fit great. Ordering 2 more for the back wheels as they are getting brittle too.
You do need 1 to 2 guys to hold the refrig while you're changing wheels.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11545335
Leveling foot that supports and stabilizes your refrigerator at the base. Replace if cracked, broken, or worn to keep the unit level and reduce vibration.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 67006434
Replacement roller axle support shaft for refrigerators. Installs to support rotating assemblies. Replace when worn, damaged, or causing wobble.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3-82710-001
Adjustable leveler leg that stabilizes and levels compatible Whirlpool appliances. Replacing a worn or damaged leveler restores proper balance, reduces rocking, and helps doors and drawers align and seal correctly. What it does
- Raises or lowers the appliance to achieve a level position on uneven floors.
- Stops rocking or wobbling that can cause noise or uneven wear.
- Helps doors and drawers close and seal properly by correcting tilt.
- Replace when threads are stripped, the foot is broken, or the leg no longer holds height.
What's included One adjustable leveler leg. Install notes
- Disconnect power (and water supply for appliances with hookups) before working beneath or behind the unit.
- Support the appliance securely (use blocks or have a helper) before removing or adjusting levelers.
- Most levelers screw in/out—turn to raise or lower, then test stability and door alignment.
Do-It-Yourself Stories from Customers like You
Leveler broke while moving freezer. William L. • Hammond , LA • January 22, 2018
Replaced leveler with new one from AppliancePartsPros.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10340017
Threads into the refrigerator base to level and stabilize the cabinet on uneven floors. Replace if broken, stripped, or missing to ensure proper alignment.
Do-It-Yourself Stories from Customers like You
My refrigerator didn't have the leveler so I ordered it. I was so happy to receive it on time. They provided my part in the time they said Evelyn O. • Corona , CA • June 06, 2020
I just put the part under my refrigerator and fixed it, perfect.
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DA66-10104C
Roller assembly installs on the base of your refrigerator to allow smooth movement. Replace if cracked, broken, or worn to restore mobility and stability.
More
Genuine Lg part
By: Lg
Part Number: 4470JA2007A
This small plastic gear is part of the freezer drawer slide mechanism, allowing the drawer to open and close smoothly on its track. It meshes with the rail system to provide controlled, even movement of the drawer. Replace this gear if the freezer drawer is difficult to open, feels jerky or uneven when sliding, or if the original gear teeth are worn or broken.
Do-It-Yourself Stories from Customers like You
Lower freezer door would not stay shut turns out a shaft with gears was missing from initial install Bruce M. • New River , AZ • August 08, 2016
Ordered the parts, which was a pair of ice gears and the bar that connects them. Had to refer to upper freezer drawer to figure out how the gears fit into the rails. Turns out they snap into a plastic hub that is riveted on the rail. Took some effort to finally get them to snap on. At first it seemed like they would not fit. Really had to apply force to get them to go on. Then added bar, which seems to me to be slightly short in length. It works, but I think if any tension is put on it,...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11395919
Mounting bracket that secures and stabilizes internal components in your refrigerator. Replace if cracked, broken, or missing to restore proper alignment.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131841600
This is a threaded leveling leg assembly that screws into the base of a washing machine. It allows you to adjust the height at each corner to keep the appliance stable and level on the floor. Replace this part if the leg is stripped, broken, or if your washer vibrates excessively or walks across the floor during the spin cycle.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241889002
Fixed rollers with leveling screw for the left hand side. For right side, order part 241889001.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10860229
This Support (mounting bracket) secures internal components and stabilizes the appliance's assembly to help prevent sagging, misalignment and excess vibration. It's a small replacement that restores proper fit and reduces rattling. What it does:
- Provides a stable mounting point for panels or internal assemblies
- Keeps components aligned to prevent binding or wear
- Reduces noise caused by loose or sagging parts
- Helps stop intermittent contact or rubbing that can cause rattles
What's included: One support bracket Install notes:
- Disconnect power (and water, if applicable) before servicing
- Access may require removing outer panels or trim; keep track of fasteners
- Support the assembly while replacing the bracket to avoid strain
More