Washer Bath Fan Heating Element Parts

Electric heating element assembly that generates heat during drying cycles. Replace when the original element burns out, breaks, or fails to heat properly.

Replacement heater assembly for washers. Installs in the wash tub housing. Replace if cracked, leaking, or damaged. Includes integrated thermistor sensor.

This heater assembly warms the wash water inside the tub so the control can reach and maintain the selected temperature. Replacing a failed element restores proper heating performance and helps return cycle times to normal. What it does:

• Heats the water in the washer's tub during applicable cycles
• Helps the control reach and hold target temperatures for better cleaning
• Failure symptoms can include cold wash water, extended cycle times, and reduced cleaning performance
• Visual damage or an open circuit on the element indicates replacement is needed

• 1 heater assembly

• Disconnect power and turn off water before servicing
• The heater mounts at the bottom of the outer tub; remove front or rear panels as required by your model to access it
• Note wire locations; loosen the center nut, press the stud to release the old seal, and carefully withdraw the element
• Seat the new gasket evenly, tighten the nut to compress the seal, then run a test cycle to check for leaks and proper heating

Washer water heater element raises water temperature during wash cycles. Replace if cracked, corroded, or no longer heating properly in your machine.

Heater assembly for washer dryer combos. Installs in the drying system to generate heat. Replace if cracked, corroded, or damaged to restore proper drying.

Electric heating element that warms water in your washer. Replace this component when cracked, burned out, or fails to heat, restoring proper wash temperature.

Replaces the tub heating element in your washer. Installs inside the wash tub to heat water. Needed when the original element is cracked or burned out.

This is a heating element housed within a metal assembly that mounts inside the washer's tub or sump area. It heats the wash water to the selected temperature during wash and rinse cycles, particularly for steam or sanitize settings. Replace this assembly if your washer fails to heat the water, displays a heating error code, or clothes are not coming out clean due to cold wash temperatures.

Heater assembly that maintains water temperature during wash cycles. Replace if leaking, cracked, or gasket is damaged. Mounts inside washer cabinet.

Heater kit for washer tub assembly, installs under door boot at front of tub. Replace if heater element or integrated thermistor is broken or damaged.