Washer Dryer Combo I Insert Plate Parts
Genuine Lg part
By: Lg
Part Number: 4434ER0002H
Central hub that connects the inner tub to the drive shaft in washers. Replace if corroded, cracked, or arms have broken off causing wobble or imbalance.
Do-It-Yourself Stories from Customers like You
Burnt rubber smell at end of cycle from 11 yr old lg wm2277hw front load washer i hand spun inner drum it was rotating in an oblong manner so thought shaft was bent Kirk E. • Eagan , MN • October 22, 2015
Looked online at several websites to see if I could figure out the problem Came across AppliancePartsPros video on replacing bearings. Watched it a couple of times and determined (well, guessed) it was the bearings and/or spider. Followed the video (great job by the way) and disassembled the washer. The spider was cracked on one arm so ordered a new one from this site. I also ordered two new bearings and the bearing seal b/c learned from the web and local appliance store that they go bad in 7+...
Read more
More
$229.27
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 285868
Seals filter housing to prevent leaks and maintain proper water flow in your washer. Replace if missing, cracked, or causing leaks. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Whirlpool lsr7233eq0 washing machine was leaking out the bottom Jerald F. • Laud Lakes , FL • April 05, 2015
I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the...
Read more
More
$29.48
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE03X27679
The bearing mechanism located at the top of the dryer drum that supports the drum's rotation and reduces friction during operation. Replace when you hear grinding or squealing noises, the drum wobbles, or clothes don't tumble properly.
Do-It-Yourself Stories from Customers like You
Screeching ge profile dryer Larry S. • Savoy , IL • January 16, 2015
Initially I replaced the rear drum bearing assembly. I searched all over for a good how-to video and came across the Appliance Pros tutorial on YouTube. It was by far the easiest to understand with the added bonus that AP had the parts I needed.
I had never done this before, but using the video as my guide I was able to replace the rear bearing assembly in about an hour and a half. It would've taken a little less time if I hadn't had to run to the hardware store for a T25 bit. I also could...
Read more
More
$39.49
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WH16X10147
Mounts in the washer's drive mechanism to support the shift fork. Replace if the assembly is cracked, broken, or worn to restore proper gear shifting.
More
$87.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 137107000
Secures the washer's inner basket to the drive hub, keeping the tub centered and stable during spin. Replace if cracked, corroded, or bolts are damaged.
Do-It-Yourself Stories from Customers like You
Leaking washer tub Hugh S. • Miami , FL • June 25, 2016
The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off...
Read more
More
$22.42
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 137576600
This plug covers an unused opening on the appliance cabinet or panel to restore a clean, finished look. Replacing a missing or damaged plug helps keep dust and lint out of the cabinet and can reduce vibration-related rattles. What it does:
- Covers an open hole on the cabinet or panel after service or manufacturing access
- Helps block dust and lint from entering the cabinet
- Restores appearance and can eliminate small buzzes/rattles from open gaps
- Replaces a lost, cracked, or loose plug
What's included:
Install notes:
- Disconnect power to the appliance; for washers, also turn off the water supply
- Align the plug with the opening and press or snap it in until fully seated and flush
- Before restoring power and use, ensure the plug is secure
Do-It-Yourself Stories from Customers like You
Missing light plug from previous owner Stephanie S. • Hudson , WI • October 13, 2014
Align plug and snap into place.
Read more
More
$12.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WH16X10146
This transmission and support assembly drives and stabilizes the wash basket. It converts motor power into agitation and spin while supporting the tub, helping resolve no-agitate/no-spin complaints and loud operation for reliable cleaning performance.
- Transfers motor power to the drive system for agitation and spin
- Supports the basket and helps maintain alignment during operation
- Helps correct no agitate, no spin, or weak/intermittent spin
- Can address grinding/rumbling noises or oil traces from the center
Includes: 1 transmission and support assembly
- Disconnect power and water before servicing; wear gloves and eye protection
- Appliance and assembly are heavy—use assistance and protect flooring
- Removal typically requires accessing from top and bottom to remove agitator/basket and drive hardware
- After installation, run a test cycle to ensure smooth agitation, proper spin, and no leaks
Do-It-Yourself Stories from Customers like You
Loud whirring noise on spin cycle Kenneth S. • Lindenhurst , IL • March 08, 2017
Replaced transmission and support assembly. Hub nut corrode on support, spanner wrench would not loosen. Had to use 1 11/16 deep socket and impact wrench to remove, basket would not com off support even after cleaning out and soaking with penetrant and using automotive air hammer to push out. I had to cut support plate in half with die grinder, cut bearing from shaft and punch out agitator shaft then use die grinder with carbide burr to cut basket shaft in two before basket would come off...
Read more
More
$320.66
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10863713
Mounting bracket that secures and stabilizes internal washer components. Replace if broken, cracked, or damaged to restore proper panel alignment.
Do-It-Yourself Stories from Customers like You
The support bracket broke Gregory Y. • Homer , AK • March 26, 2017
REPLACED IT WITH NEW ONE
Read more
More
$257.36
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WH16X10145
Support assembly stabilizes the washer drum and inner tub components. Replace if cracked, worn, or causing misalignment during operation.
Do-It-Yourself Stories from Customers like You
Stack washer was leaking from the seal. Owen P. • Geneva , OH • April 06, 2022
I got a new seal, Then dissembled the washer and took it to my shop where after two days of soaking wd penetrating oil. With an 8lb sledgehammer, I beat the transmission from the housing in many pieces. Not breaking the tub. Removing the agitator---I managed to get grease all over. Then I tried ordering the part from a local parts dealer. Him not ordering the part because he couldn't find a supplier! I found you on the internet ordered the part. It was to arrive on Friday. Not. then Saturday....
Read more
More
$288.41
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 8066086
This drum hole plug seals an unused or service access hole in the dryer drum to help prevent clothing snags and reduce interior airflow leaks. Simple replacement restores the drum surface and helps keep items from catching. What it does:
- Covers a drum access/service hole to provide a smooth interior surface
- Prevents fabric from catching or tearing on open drum holes
- Reduces unwanted air leakage through the drum
- Helps maintain normal drum rotation contact points by keeping openings closed
What's included:
Install notes:
- Disconnect power to the appliance before starting any repairs
- Inspect the drum area and remove any debris before installing the plug
- Press or snap the plug into the hole until fully seated; replace if damaged or deformed
More
$11.34
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 692790
White plastic plug insert for dryer side panels. Fills mounting holes for a clean finish. Replace if cracked, broken, or missing from installation.
More
$47.41
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE1X1262
This is an electrical plug connector used in the dryer's wiring system. It provides a secure connection point for internal wiring to ensure proper electrical flow to dryer components. Replace this plug if it is burned, melted, cracked, or if you are experiencing intermittent power issues with the dryer.
More
$22.32
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10404617
Seals unused vent openings in your dryer to prevent unwanted airflow, drafts, and debris entry. Replace if cracked, missing, or no longer sealing properly.
More
$49.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 134264800
$38.11
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE19M1696
Mounting bracket that secures the control assembly in your laundry center. Replace if cracked, broken, or worn to restore proper panel alignment.
More
$25.23
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131689100
Secures plastic trim and interior panels to your washer dryer combo chassis. Replace this fastener if cracked, broken, or missing to restore fit.
More
$13.95
Out Of Stock
Usually ships within 4 - 14 days