00487542 Parts

Right-side oven rack support mounts to the interior wall to hold and guide oven racks at proper heights. Replace if cracked, broken, or missing.

Replaces a damaged, cracked, or missing bottom drawer on your range. Restores smooth slide action and a flush, finished look to the storage compartment.

Replaces cracked or broken oven door glass on electric ranges. Covers the inner cavity and allows viewing without opening the door. Essential when damaged.

Microwave won't start or runs with door open? This door switch detects when the door is closed for safe operation. Common wear part. DIY repair.

This factory screw secures panels, brackets, and other components in your cooking appliance. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and keep parts properly aligned during use.

• Fastens components to maintain proper alignment and stability
• Helps prevent vibration, rattling, and loose parts during operation
• Replace if threads are stripped, the head is damaged, or the screw is missing
• Commonly used to mount internal or exterior parts in ranges and wall ovens

• Disconnect power and allow the appliance to cool; shut off gas supply if applicable
• Use the correct driver bit to avoid stripping the screw head
• Install in the original location and do not overtighten
• If the receiving threads are damaged, repair or replace the mating part before installation

This replacement switch restores reliable on/off control to the circuit it serves. When the original wears out or overheats, installing a new switch can resolve non-responsive controls and intermittent operation so your appliance functions as intended.

• Opens and closes an electrical circuit when actuated by the appliance's lever, button, or mechanism
• A failed switch can cause no response, intermittent operation, or components that won't turn off
• Common signs include a stuck/loose actuator or burned/broken terminals
• Continuity testing with a multimeter can switch failure

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Note/photograph wire locations and transfer one lead at a time to matching terminals
• Use needle-nose pliers to remove spade connectors—do not pull on the wires
• Verify continuity and test operation before reassembly

Protective vent grill cover for microwave hoods. Covers and protects the ventilation opening. Replace if cracked, discolored, damaged, or missing.

This replacement part is a black element mounting clip used in ranges or wall ovens. This clip is used for surface elements on electric ranges and ovens. The clip itself connects the surface of the element to the support bracket which allows the stove to heat up. The user might need a new clip or clips if the heating element on the stove is loose, if the heating element is completely detached, or if the clip itself is bent or broken. This clip is black and made of sturdy metal that can withstand heat as well as strain on the clip itself. Installation of this clip is very simple as it just requires replacing the old one with a new one and making sure it is secure. Pliers might be required if the old clip is bent or stuck near or on the heating element. There are no special tools needed for this repair. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from Frigidaire and other brands like Electrolux, Gibson, Kelvinator, Crosley, Westinghouse, and more.

Secures dishwasher thermostat to base for accurate temperature sensing. Replace if loose or broken to prevent overheating. Verify fit by model number.

The Mounting Kit is an OEM part for Frigidaire microwaves. It provides the necessary hardware to mount a built-in microwave securely above a cooktop or range. The mounting kit contains mounting brackets, and screws to facilitate a safe and sturdy installation. This kit does not include the installation instructions.

Causes of a bad mounting kit can include deterioration of mounting brackets or screws over time and repeated use, or if the original kit was missing components needed for a secure installation.

Symptoms of a bad or missing mounting kit include:

• The microwave become loose or detached from the wall
• Screws fall out or strips during installation
• Brackets bend or break over time
• Microwave is not level after installation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Size: 8-32t x 0.500 inch. Color: Black.

Connects the motor to the glass turntable tray in your microwave. Replace if cracked, broken, or worn to restore smooth tray rotation and proper cooking.

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

If your dishwasher won't start, cycles won't advance, or buttons don't respond, the control board may have failed. This board regulates all functions.

Replace a broken, cracked, or missing control knob on your electric cooktop. Installs on the control panel to adjust burner settings and temperature.

Secures the dishwasher door latch assembly to the cabinet. Replace if screw is stripped, missing, or damaged to restore secure latch installation.