Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

11026242692 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Connector (3 - Circuit)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3360056

Used for the pressure switch.

Do-It-Yourself Stories from Customers like You Broken lid switch   Ari G. • State College , PA • June 01, 2015

Watched on line Video. Only problem was in disconnecting wire "bus" connector from switch. I was unable to remove connector without damaging it. I "jumped" connector to prove switch was faulty. This also allowed my wife to continue to do laundry while part arrived. I ordered a 3 circuit connector, but this was not the correct part. I ended up removing 3 wires from old broken connector and attaching them to new switch without a connector. Electrical tape did the trick. Not perfect... Read more

More
Hinge
Genuine Whirlpool part
By: Whirlpool
Part Number: WP387402

Used for control panel.

Do-It-Yourself Stories from Customers like You Kenmore washer would not spin and made a grinding noise   Gregory B. • Wappingers Falls , NY • January 17, 2015

Replaced direct drive washer motor coupling. Instructional video was right on and easy to follow. Was able to save a 15 year old machine for a few bucks. The shipping was super fast (within 2 days) and the customer service is fabulous. I would definitely recommend to everyone. Read more

More
Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3951166

 

Do-It-Yourself Stories from Customers like You Getting stuck in cycles   Jeffrey S. • Willowbrook , IL • September 15, 2019

Excellent and the help of the videos was most helpful. The part was new highly recommend site Read more

More
Washer Tub Support With Spin Tube
Genuine Whirlpool part
By: Whirlpool
Part Number: 280184

This tub support assembly holds the washing machine drum in place and includes the spin tube for water drainage. It replaces worn supports that cause excessive vibration, loud noises, or drum movement during operation. Install when your washer shakes violently, makes grinding sounds, or the drum feels loose.

Do-It-Yourself Stories from Customers like You A bunch of things. Leaking, clutch was slipping and not spinning very well, and the brake was not engaging..   Alan V. • Melrose Park , IL • November 11, 2022

I installed all the necessary parts that I received from you and it works great, now. I received the parts in good time without overnighting them. I had the whole washing machine apart and went through it all before ordering parts. Tear down and assembly was easy. I just took my time. The washer is 17 years old and was well built. It was worth it compared to what is on the market today, and cheaper. Read more

More
Link
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63466

Used for leveling mechanism. Includes a quantity of one. Order as needed

More
Actuator
Genuine Whirlpool part
By: Whirlpool
Part Number: 350733

 

This part fixes the following symptoms
  • Will not drain
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Would not go into agitate mode or drain   Mike J. • Red Bank , NJ • April 29, 2018

I found the parts on your website and watched the video and it was fixed in no time. This parts site is always the one I go to first. I've done a number of projects and have never been disappointed. Read more

More
Lubricant
Genuine Whirlpool part
By: Whirlpool
Part Number: 285208

Use only in brake shoe assembly on roller & pin. Color: White/Grey.

More
Base Frame Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: 285771

Used for direct drive washing machines. Complete assembly includes 2 level mechanism links, 1 level mechanism spring, 1 knurled pin, 2 rear feet, 1 pad plate, 1 suspension plate, 1 base pad, and 1 suspension spring retainer.

Do-It-Yourself Stories from Customers like You Base supports and legs were rusted and broken   Matthew D. • West Middlesex , PA • January 14, 2019

I ordered a Base frame assembly and front leveling feet along with locking nuts. I removed the broken parts by putting the washer on its' side and I removed the bolts on the bottom of the back panel and removed the motor and the transmission. I installed the new feet onto the new base frame and i slid the new frame into place and then I reattached everything. Read more

More
Washer Power Cord Strain Relief
Genuine Whirlpool part
By: Whirlpool
Part Number: 285777

This protective component secures the power cord where it enters the washer cabinet, preventing wire damage from movement or strain. Replace if the power cord pulls loose, shows signs of damage at the entry point, or the washer intermittently loses power.

More
Drain Protector
Genuine Whirlpool part
By: Whirlpool
Part Number: 367031

Catches lint, threads, and strings.

More
Basket
Genuine Whirlpool part
By: Whirlpool
Part Number: 3956207

 

More
Outer Tub
Genuine Whirlpool part
By: Whirlpool
Part Number: 63125

This genuine OEM part is an outer tub for washers. The outer tub is the main tub where clothes are set to wash. If the tub is no longer spinning properly or is making a loud noise as it rubs against the washer, it will need to be replaced. Thankfully, replacing this part is a relatively simple process.To replace the outer tub, start by making sure the washer is unplugged. After that, remove the front panel of the washer. Once removed, lift up the top panel so that it is no longer covering the outer tub. Next, locate the mounting bolts that secure the tub and unthread them using a socket wrench. Once removed, lift the tub out from the washer. Replace with the new tub and secure the mounting bolts. Reinstall the front panel and plug the washer back in. This replacement part is sold individually and is compatible with Whirlpools, Maytag, Kitchenaid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand washers.

More
Washer Agitator Auger
Genuine Whirlpool part
By: Whirlpool
Part Number: 63901

Fix a washer that won't agitate or clean clothes properly. This agitator auger connects the agitator to the drive system. Moderate DIY repair.

More
Suds Shield
Genuine Whirlpool part
By: Whirlpool
Part Number: 8539874

 

More
Ring-Tub
Genuine Whirlpool part
By: Whirlpool
Part Number: W10821664

 

Do-It-Yourself Stories from Customers like You We washed a bath rug and it snagged on the tub ring tearing the rug and roughening the surface of the tub ring   Joshua T. • Pullman , WA • July 04, 2014

Replacement of the tub ring using a part from Appliance Parts Pros and a video from the same on YouTube! Went easy peasy. Read more

More
Lid Hinge Bumper
Genuine Whirlpool part
By: Whirlpool
Part Number: WP19119

 

Do-It-Yourself Stories from Customers like You Washer was "dead" with a partially washed load and would not do anything   Jimmy M. • Hopewell , VA • September 19, 2014

Researched this kenmore washer on-line and found the problem to be the lid switch. Saw a diagram on how to jump this switch by connecting a wire to both outside wires on the harness and voila! It worked! This is not a fix but it allowed me to finish the load of unwashed clothes and told me which part was bad (do not run washer jumped like this.......fire hazard!) Ordered the lid switch and it was an easy repair. A $14.00 switch was a lot cheaper than a $450.00 washer. Thanks appliance parts... Read more

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google