1106120 2011 Parts

The carburetor float is housed in the carburetor and is used to help control the fuel flow. It adjusts the needle valve and ensures that the appropriate amount of fuel reaches the carburetor bowl. This helps provide the right mixture of air and gasoline for the engine to operate at optimal performance. Over time, the float can become worn or detached, or the pin could come loose. When this happens, the flow is affected, and the engine will not operate correctly. If the float isn't working correctly on a lawnmower or another small engine, it might be time for a replacement. This replacement part is a genuine OEM product designed to be used with many Briggs & Stratton engines, including lawnmowers, pressure washers, generators, and other lawn and outdoor equipment engines. It is sold as a single unit with the metal cotter pin included. There are more than 150 compatible machines that this unit will work with. If your lawnmower isn’t working as it should or if the float has come loose and can't control the flow appropriately, this OEM replacement can get things back in working order.

The carburetor has a float valve to control the flow of fuel from the tank to the reservoir. A float valve has three main components - a float, seat, and a needle. When there is adequate fuel level in the carburetor, the float will rise, prompting the needle to close against its seat and prevent overflowing. If the float valve is malfunctioning, it may overflow the carburetor. In some cases, it doesn't provide ample fuel into the carburetor. If you suspect that the needle and seat are faulty, don't waste another moment. Over time, a defective needle and seat can lead to more expensive repairs like a leaking carburetor and even an engine misfiring. For a genuine OEM replacement, get this Midwest Engine 398188 Needle & Seat Kit. Please take note that the Midwest Engine 398188 Needle & Seat Kit only comes with the needle and seat. If you also need a genuine Midwest Engine float replacement, you will need to purchase it separately.

This filter is used for lawn and garden equipment. A dirty or clogged filter could cause the engine to run poorly.

This is a foam pre-filter that is used to help prevent dust, pollen, and other debris from clogging the air filters of small engines. One of the most common problems faced by small engines is an inadequate air supply caused by air filters that have become mired with airborne debris. Cleaning or replacing filters can become a tiresome and expensive proposition. If filters are not adequately cared for, they perform poorly, waste gasoline, pollute the air, and cause internal engine damage. A good way to help an air filter do its job is by adding a foam pre-filter in the air filter compartment. Pre-filters are exposed to all the things that clog air intakes, so periodically, they also must be replaced. Foam pre-filters are designed to fit snugly inside the housing of the air filter of virtually all small engine housings. To install a pre-filter, remove the air filter housing by taking off the one screw holding it in place. Remove the air filter from the housing and place the pre-filter inside against the exterior wall of the housing with the arrows pointing up. Reinstall the air filter. The paper of the filter should fit perfectly against the labeled side of the pre-filter. Now simply reattach the air filter housing. Genuine Midwest Engine makes this OEM replacement part, and it is sold separately.

A rewind starter, also called a recoil starter, is an assembly on many types of lawn and garden equipment used to trigger combustion in the engine. Set at the front or top of the engine, it cues the starting mechanism to turn the engine fast enough for a spark to ignite fuel in the cylinder when the handle is pulled. This part features a recoil spring connected to a pulley, and when the rope is yanked, it stretches a recoil spring. Letting go of the rope causes the spring to snap back, and the user will be able to continually pull the rope and get things moving faster and faster until there is combustion. The rope is part of the pulley system that will pull out and recoil quickly into the starter cover on top of the engine when the user pulls the starter rope’s handle. If there is no recoil or the rope gets stuck, it may need to be replaced. Without a functional starter assembly, the machine won’t work. A rewind starter kit can be used to address this issue. An authentic OEM part, it works with Briggs & Stratton and Husqvarna equipment. It contains a plastic shroud, starter pulley, starter spring, grip, the pull rope, and all hardware necessary to attach it to the machine.

This is an OEM replacement part for the recoil pulley and spring assembly, also called the rewind pulley and spring. The recoil starter, which is operated by a rope, will engage the drive cup on the flywheel, which will start the engine when it is pulled. These are commonly found on lawnmowers and similar outdoor equipment. If the rewind begins to bind when pulling the rope, or if it does not rewind easily, it could indicate that a replacement is needed. In addition, if the plastic on the old pulley is worn and cracked, it is a good idea to replace it before it fails entirely. This OEM assembly comes from the manufacturer and includes the pulley and the spring. The pulley is made from plastic, and the spring is metal. The part can be used for a range of machines and brands. The pulley and spring assembly are compatible with lawnmowers, tillers, and other small engines from brands like Craftsman, Briggs & Stratton, Snapper, Lawn-Boy, Toro, and Cub Cadet.

This genuine replacement crankcase gasket creates an airtight seal on the crankcase so that oil and air do not leak out of the engine when it is running. Over time, this gasket is exposed to extreme pressure and high heat and will naturally deteriorate. It could become faulty and create leaks or it could break entirely. In either case, a full replacement of the gasket is the only solution. This OEM part can provide an exact fit for compatible lawn and garden equipment engines. This genuine crankcase gasket is manufactured to strict standards by Briggs & Stratton and is compatible with select engines on lawn mowers and generators from Briggs & Stratton, Lawn Boy, and Toro. This gasket is made of durable composite material and it is sold as an individual unit. Other gaskets, hardware, or related parts are all sold separately. The repair can be done with just a wrench, but be sure to allow the engine to cool entirely before beginning any repairs. Always wear gloves and disengage the spark plug for safety when performing engine work.

The pawl friction plate on lawn and garden engines is an essential part of the starter assembly that is needed to crank start the machine. It provides power to the starter cup. If the engine on a machine will not start, it could be due to a broken or worn pawl friction plate. Replace the plate immediately to ensure your machine is working properly. This is genuine OEM part is compatible with a range of product types, including lawnmowers, snowblowers, tillers, pressure washers, generators, log splitters, wood chippers, leaf blowers, and chippers. Compatible brands include Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, Snapper, Simplicity, and Toro. The part is sold individually. Keep in mind that this only includes the pawl friction plate. It does not contain the screw or spring, and these will need to be purchased separately.

A carburetor on a lawn or garden appliance often has a float-feed chamber or bowl mounted on one side. This is a miniature fuel tank that takes a trickle feed from the main fuel supply. A carburetor is unable to use fuel that is under pressure, so the float chamber keeps everything at atmospheric pressure. When any sort of dirt or debris enters the fuel and air passages, it can cause an array of issues. The debris may enter due to shrinkage of O-rings and gaskets, and that is why a replacement gasket is essential. A carburetor screwdriver is essential when making this repair. Replacing it involves removing several pieces of the carburetor assembly, including a float assembly, inlet needle valve, and the old fuel bowl gasket itself. This authentic replacement carburetor bowl gasket will fit a small engine carburetor bowl on wood chippers, leaf blowers, pressure washers, tillers, snowblowers, lawnmowers, and small engines. It is compatible with Briggs & Stratton, Toro, Simplicity, Lawn-Boy, Cub Cadet, and Snapper, among others.

Fuel is a crucial component for any gas-powered lawn or garden machine. A full fuel tank replacement can be done relatively quickly with this authentic OEM small engine fuel tank. Made for lawnmowers, pressure washers, generators, wood chippers, and other small engine machines, it includes the full tank and a cap. Any issues with the fuel system will lead to problems with the use of the equipment, and this is true whether it is a cracked or leaking fuel line or a malfunctioning fuel tank. To replace it requires the existing fuel to be fully drained from the tank and fuel system. The spark plug wires must also be disconnected before the original tank is removed. Tools required will include pliers to disconnect lines, screwdrivers to remove the motor housing, and socket wrenches to remove the old tank. Replacing it is simple and means little more than handling the pull cord and reattaching the fuel line once it is replaced. This replacement fuel tank works with a variety of brands, including Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Craftsman, and Simplicity.

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This grip-starter rope is a genuine Midwest Engine replacement part for outdoor appliances with small pull start engines, such as lawn mowers, snowblowers, wood-chippers, leaf blowers, and chainsaws. The grip-starter rope is the piece that allows an appliance user to start the engine by pulling the rope; this mechanism can be referred to as a recoil starter, a starter rewind, or a rope start as well. Any damage to a grip-starter rope will be obvious to the naked eye; while the problems with the actual starting mechanism of a pull start-operated engine might be more difficult to assess and root out, the damage to the actual grip-starter rope itself will come in the form of tears, rips, and general time-worn erosion of the casing material of the rope. If there is significant tearing on the rope itself, this replacement grip-starter rope can serve as a replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This grip-starter rope is compatible with the following brands: Briggs and Stratton, Toro, Cub Cadet, and Simplicity.