12-1019 Parts

Seals the two halves of your engine crankcase to prevent oil leaks. Replace when you notice leaking or during crankcase maintenance. Confirm fit.

Carburetor overhaul kit with gaskets and diaphragms for small engines. Replace when engine runs rough, won't start, or idles poorly. Confirm fit with your model.

Fuel tank cap seals your engine's fuel tank and maintains proper pressure for combustion. Replace if cracked, loose, or leaking. Verify fit with model number.

A carburetor float bowl is an essential part of every carburetor because it controls the flow of gasoline from the fuel tank to the motor. Whether because of gasoline impurities or lots of use, the interior pieces of small engines may fail and need to be rebuilt. For that purpose, the float bowl comes with the three required gaskets. Replacing the float bowl in a Briggs & Stratton carburetor is a simple process. First, detach the carburetor from the engine, then removing the screw from the top of the carburetor housing. Replace the large gasket with the new one, making sure that it fits properly and will seal. Then set the new float bowl down onto the gasket. Next, take the small gasket and place it atop the float bowl, screwing the bolt onto the float bowl. Then it’s time to reattach the carburetor to the Briggs & Stratton engine. This OEM assembly is a factory-built replacement for the original parts it replaces. It is individually packaged and sold separately. Mowers, chippers, generators, blowers, snowblowers, tillers, and other small engines using a Briggs & Stratton engine can use this replacement kit. Among compatible brands are Craftsman, Snapper, Simplicity, Toro, Cub Cadet, and Lawn boy.

This fuel tank is a genuine OEM replacement part for a wide range of snowblowers and blower vacuums. The fuel tank is located on the exterior of an appliance and allows the operator to top up their machine with more fuel. The fuel tank connects to the carburetor through a fuel line and feeds the engine gasoline to create power. This fuel tank holds roughly 2.8 liters, or 3 quarts, of fuel. Although fuel tanks are made of durable reinforced plastic, they can be knocked easily due to their position on the outside of an appliance. If punctured or dented, fuel will start to leak from the tank and present a potential fire hazard. For safety reasons, a damaged fuel tank should be replaced as soon as possible. Using a set of wrenches, unbolt the damaged tank and reassemble with this replacement part. As a high-quality replacement part, this fuel tank comes sourced from its original manufacturer. It is compatible with Briggs & Stratton and Toro appliances. This tank includes a fuel cap but does not include a fuel line or the hardware needed for assembly.

This authentic OEM replacement carburetor kit is designed to be used in a variety of small gas-powered lawn appliances. This kit includes a carburetor, gasket, and choke assembly. The carburetor is an essential part of an engine that is responsible for mixing fuel and air before passing the mixture on for combustion. This is a delicate balance that can cause the engine to perform poorly if the carburetor is damaged or faulty. Carburetors most commonly wear out overtime because of built-up engine sludge. After extended periods, the carburetor will begin to build a coating of exhaust and combustion products that prevent it from working as effectively. When this happens, the engine may begin to shake, idle, misfire, hard start, backfire or even put off black smoke. You will need a screwdriver and set of socket wrenches for this repair. This part is of the highest quality and comes sourced directly from the original manufacturer. It can be used with Toro, Simplicity, Cub Cadet, and Briggs & Stratton appliances. This part ships individually of additional hardware.

Secures hoses in your engine to prevent fuel and oil leaks. Replace when rusted or damaged to avoid engine malfunction. Verify fit with your model number.

Replacement fuel tank cap for small engines. Seals the fuel tank to prevent leaks and contamination. Order a new cap if yours is cracked, missing, or worn.

This carburetor kit is a genuine replacement part for select engines from Briggs & Stratton. The carburetor is responsible for taking in air and gas and mixing them before sending them into the engine. There are many inner parts and components to the carburetor assembly that are constantly exposed to pressure, high heat, and repetitive motion, which can cause them to wear down over time. If any part of the carburetor fails, the engine will not be able to perform. Replacing the carburetor will get the engine back to optimal operating capacity. This OEM part can provide an exact fit for compatible models. This replacement carburetor kit is designed for use in more than 150 engines in lawn equipment such as lawn mowers, tillers, load blowers, wood chippers, and other small engines from Briggs & Stratton, Cub Cadet, Snapper, and Simplicity. The carburetor kit includes the carburetor body, gaskets, screws, and choke assembly. Owners can test the carburetor by removing the air filter and pouring a teaspoon of fresh fuel directly into the carburetor. If the engine dies immediately after starting, the carburetor likely has gone bad. This repair requires draining the fuel system and the engine should always be cool before any work is done.

If your small engine won't start or has no spark, a faulty spark plug terminal may be the cause. This terminal connects the ignition coil to the plug.

Replacement mounting screw for lawn and garden engines. Secures engine components and brackets. Order when original is lost, stripped, or damaged.

Engine runs rough or valves aren't opening correctly? This metal valve tappet converts camshaft rotation to linear valve motion. Direct replacement part.

Control wire for lawn and garden engines. Connects controls to engine throttle or choke mechanisms. Replace if frayed, broken, kinked, or missing.

Replacement screw that secures the pawl friction plate in lawn and garden engines. Replaces lost, stripped, or damaged flange bolts on the recoil assembly.

This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.