178986000000 Parts

This is an air filter base used with many types of lawn and garden equipment. The air filter base is made of durable plastic. It creates a mounting point for the air filter assembly on a carburetor. The air filter base can be damaged over time by impact during use or exposure to the elements. When this occurs, the part will need to be replaced so the air filter stays secure in the equipment.The tools needed to replace the air filter base will vary based on the model of the tool it is found in. In most cases, the fuel lines will need to be removed from the air filter base as part of the replacement process. Remove any bolts or screws from the base so it can come out. Install the new replacement part and reattached the fuel lines. Place the cover back on before using the tool.This air filter base is designed to be compatible with log splitters and snowblowers manufactured by Cub Cadet and MTD. It is sold as an individual component. This is a genuine OEM replacement component that is directly sourced from the manufacturer.

This is a quality choke knob used with many types of log splitters and snowblowers. The choke knob is made of durable plastic. This knob can be used to actuate the choke valve. This ensures that a rich blend of fuel and air will pass into the cylinder to assist in starting the engine. Through use or time, the choke knob can break, become cracked, or get lost and will need to be replaced. If the choke knob isn't replaced, the engine may not start. It may also have problems running continuously.The choke knob is found on the choke plate lever on the carburetor. To replace it, the screws that secure the top cover of the tool need to be removed. Remove the top cover and take out the air filter cover. Remove the ignition switch lever to get access to the choke knob. Take out the original component and replace it with a new part before reassembling the other parts.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as a single component. The choke knob is made for use with snowblowers and log splitters manufactured by MTD and Cub Cadet.

Engine flooding or won't start? This fuel shut off lever controls fuel flow and protects the float valve. Common fix for flooded engines. Simple repair.

This is a fuel shut off gasket that is often a component in snowblowers and log splitters. Rather than using a bowl and an O-ring, the fuel shut off gasket creates an airtight seal with the carburetor. The fuel shut off gasket helps to prevent fuel from leaking out of the equipment. The most common sign of a failing fuel shut off gasket is a gasoline leak. If the cover starts to leak, this component will need to be replaced.The first step to replacing the fuel shut off gasket is to remove the air filter assembly. Next, remove the carburetor. Hold the fuel line tight to prevent a spill and remove any linkages present. Take the screws out of the carburetor bottom and remove the old gasket. Clean off the surface before installing the new replacement fuel shut off gasket.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The fuel shut off gasket is designed for use with log splitters and snowblowers manufactured by MTD and Cub Cadet.

This secondary air valve gasket is an OEM replacement part that is sourced directly from the manufacturer for use on lawnmowers and other lawn and garden machines. The secondary valve is commonly known as the idle valve, and this gasket is used to protect the valve from contaminants and to keep the air and pressure at preset levels. If the gasket is worn or torn due to regular use, it will need to be replaced. If the idle on the engine is not functioning correctly, the engine dies when it should be idling, which is a good indicator of a secondary air valve gasket problem. If the engine idles too high, this could be another sign of problems with the gasket. Before replacing the secondary air valve gasket, drain the fuel from the machine and take the spark plug out to prevent accidental engine starting. Use the engine diagram to locate and remove the secondary valve gasket. Install the new gasket and reinstall the parts removed from the engine.This secondary air valve gasket is sold individually. It is compatible with lawnmowers, lawn tractors, and other small engines manufactured by Cub Cadet, MTD, Husky, Troy-Bilt, Yard-Man, and Yard Machines.

This is a genuine OEM replacement tether sourced directly from the manufacturer. It is used on many different fuel tanks on lawn and garden equipment. The tether attaches to the fuel cap and is part of the fuel cap originally. The fuel cap is vented to prevent heat from causing fuel tank expansion and possible explosion. The tether is designed to help hold the fuel cap in place during use. Everyday use may cause the tether to fall off. Without the tether, vibration from use or running into brush and trees can cause the fuel cap to come off. The cap is red to help it stand out on the engine. It has the image of a gas pump to show that it is where the fuel goes.If the tether breaks off and falls into the gas tank, use needle-nose pliers to fish it out. If that does not work, remove the fuel tank and empty the contents into a dish. The tether will fall out. The new gas cap and tether can be screwed in without tools.This tether is a plastic part that is individually sold. It is compatible with many fuel tanks manufactured by MTD, Yard Machines, Cub Cadet, and Troy-Bilt.

This is a genuine OEM replacement governor arm sourced directly from the manufacturer for use on various snowblower and snow thrower engines. It is part of the mechanical governor system that controls the carburetor throttle to maintain steady speed regardless of how much stress the engine is under. The governor arm is located on the governor cross shaft. One end is connected to the governor spring and the other is connected to the throttle linkage. The governor arm is pushed in one direction and pulled in another to increase and decrease the throttle speed. If the throttle will not rev or gets stuck in one position, the throttle arm may be the cause. This part could be damaged in impact, for example of the blower is dropped or tips over. If this occurs, the throttle arm will need replaced.Remove the spark plug and drain the fuel before working on the governor. Remove the governor spring and detach the governor arm from the linkage. Install the new governor arm and reattach the spring. Replace the blower parts. Fuel the blower and test. Adjust the governor as needed.The governor arm is a metal part that is sold as an individual unit. It is compatible with snow blowers and snow throwers manufactured by MTD, Yard Machines, Troy-Bilt, and Cub Cadet.

A fuel level indicator is an important piece of hardware that empowers the owner or operator of the machine to help the machine operate optimally. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as log splitters. It is compatible with products by brands such as Cub Cadet, MTD, and Troy-Bilt. This fuel level indicator is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. The fuel level indicator part is crucial, as it allows the owner or operator of the machine to know when the fuel is getting low and when it is time to refuel. Fuel level sensors consist of two main components: the sensing system, also called the sender, and the indicator or gauge, pictured here.The replacement or repair process of the fuel level indicator should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Rollover valves plan an important role in helping to keep machines safer in the event of a rollover accident. They are used in a range of small engines and prevent fuel from leaking from the tank if the equipment lists or rolls over.This valve is made from high-quality materials, but as with many parts, it can start to wear out over time. Owners may want to check the valve to ensure it is in good working order and replace it if it isn't. The piece is relatively small, which means it could be lost when working on the engine, as well. The machine shouldn't be used without the rollover valve in place.The rollover valve assemblies are sold individually and will work with a range of models from Cub Cadet, Troy-Bilt, and MTD. The assemblies are genuine OEM parts sourced from the manufacturer, and they are made from high-quality, durable materials.

This fuel hose clamp is used on the lines to help reduce the risk of fuel leaks. Damaged fuel hose clamps should be replaced right away to avoid a potential fire hazard.Fuel hose clamps are made from durable, quality metal, but they may need to be replaced on occasion. The clamps can become bent and damaged due to accidents, or they could become corroded. They could also be lost when working on the engine. The replacement is easy, but owners will want to beware of leaking fuel whenever they work on fuel lines.The fuel hose clamps are sold individually and will work for many models from Cub Cadet, Troy-Bilt, and MTD. The parts are made from quality material and are genuine OEM parts sourced from the manufacturer.

This primer hose is commonly used on various types of lawn and garden equipment. The purpose of the hose is to deliver fuel from the fuel tank to the carburetor. If it is not functioning properly or has been damaged, it will not transport the fuel and will make the machine difficult to start.Plastic primer hoses will start to wear out over time. They can crack and leak, which would waste fuel in addition to being a significant fire hazard. If there is damage of any sort to the primer hose, the owner will need to replace it right away. Replacement is easy, but owners will want to check to see if there is fuel in the old primer hose before removing it.This primer hose is compatible with many engines from popular manufacturers including MTD, Cub Cadet, and Troy-Bilt. Each primer hose is sold individually and is made from quality material. The hose is a genuine OEM replacement part sourced from the manufacturer.

The fuel tank holds the fuel used to power the machine. Without a working fuel tank, the engine will not be able to run. Leaking fuel tanks are especially dangerous. Not only is fuel lost, but there is a greatly increased risk of fire. Damage to the fuel tank could occur from an accident or simply due to the age of the tank.This fuel tank assembly contains the needed parts to replace the fuel tank on certain small engines from MTD, Cub Cadet, and Troy-Bilt. The assembly is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.

These rear mounting brackets are for use in machines with small engines, such as log splitters. The brackets are designed to ensure that the engine is properly and safely mounted. If there is a problem with the rear mounting brackets, the engine will not be not properly and safely attached. Owners will need to be sure the brackets are in good shape.The brackets are made from quality materials and should last for a long time without worry. However, there could be damage to the brackets for any number of reasons. Corrosion or breakage could occur and this is something owners will want to look for occasionally. If any damage is noticed, owners should make it a point to replace the brackets sooner rather than later.These brackets are for use with engines and log splitter models from Cub Cadet, MTD, and Troy-Bilt. The high-quality parts are sold individually. The brackets are genuine OEM replacement parts that have been sourced from the manufacturer.

The decorate cover of an engine is sometimes called an appearance cover. As the name suggests, it covers the engine and provides a more aesthetically pleasing appearance. These types of covers are used for many types of engines including those found on mowers. The covers on mowers are smaller than those found on vehicles.The covers are meant to be durable and long-lasting without the need for much maintenance. They do not serve a functional purpose, but they should still be kept on the engine. Over time, there could be damage to the cover, such as cracks or breaks. It may start to wear down and crack. In those cases, owners will want to get a replacement. Adding the new cover should be an easy replacement.This decorate cover is used for certain models from MTD, Cub Cadet, and Troy-Bilt. The cover is durable and made from quality materials. It is sold individually and is a genuine OEM replacement part from the manufacturer.