2202Ad Parts

This oil pickup elbow is a genuine Husqvarna part, sold individually. This oil pickup elbow can be used as a replacement part for chainsaws. The function of the oil pickup elbow for a chainsaw is to fasten around the fuel line and prevent the fuel line from being yanked from the fuel tank by force during inspections or while operating the chainsaw. An oil pickup elbow might have to be replaced if it no longer effectively keeps the fuel line in place and attached to the fuel tank. If the chainsaw user can pull the fuel line out of the machinery, the oil pickup elbow needs to be replaced with this genuine OEM replacement part. This could be as a result of damage to the oil pickup elbow in the form of general wear and tear or loosening over time. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This oil pickup elbow is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

Seals the carburetor adapter to prevent dirt and debris from entering your chainsaw engine. Replace if cracked, brittle, or leaking. Confirm fit by model.

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.

Fix a broken or missing pull start handle that prevents engine starting. This chainsaw starter handle works with the recoil assembly for reliable starts.

This is a small filter screen that sits in the oil supply line of a chainsaw, filtering debris from the bar and chain oil before it reaches the oiler mechanism. It ensures clean oil flows to the bar and chain for proper lubrication. Replace this filter if the chain is not receiving adequate oil, the bar is overheating, or the filter screen is visibly clogged or damaged.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

This authentic OEM replacement on/off switch is a safety measure that manufacturers install to prevent the chainsaw or trimmer from starting before the operator is ready. It also allows the operator to stop their appliance at a moment's notice if they lose control of it. The on/off switch is located in or near the handle of the appliance and must be in the on position for the appliance to start. If hit to the off position, the appliance will immediately stop running. Switches can slowly wear out over time due to repeated use. When it wears out, the switch will no longer give the same amount of resistance and may be tripped more easily. This can be frustrating as it means that the operator would have to continually restart their appliance. To replace the switch, use a screwdriver to access the handle interior and detach the wiring from the old switch. Install the new part and reassemble. This switch is a high-quality replacement part for Craftsman chainsaws and trimmers, and as such, it comes sourced directly from the original manufacturer. This part ships individually.

Complete engine gasket kit for chainsaws. Provides tight seals between connected parts to improve performance and prevent carburetor leaks. Confirm fit by model.

If your chainsaw won't start, runs rough, or stalls frequently, this carburetor repair kit restores proper fuel-air mixture. Includes all components needed.

This kit includes replacement diaphragms and gaskets for the carburetor on a gas-powered chainsaw or other small engine outdoor equipment. These components create proper seals within the carburetor to regulate fuel flow and air-fuel mixture. Replace this kit if the engine is hard to start, runs rough, stalls frequently, or leaks fuel from the carburetor area.

Chain overheating or not staying oiled? This oil pump kit delivers consistent lubrication to prevent chain damage and ensure safe operation. DIY fix.

Fix engine misfiring, stalling, or intermittent running with this chainsaw carburetor kit. Ensures correct air-fuel mixture for smooth operation.

Vibration-dampening spring assembly that installs between the engine and handle. Replace if springs are broken, worn, or missing to restore proper isolation.

This is a replacement carburetor for a gas-powered chainsaw, responsible for mixing the correct ratio of air and fuel before delivering it to the engine. It controls engine speed at idle, partial throttle, and full throttle through internal jets and adjustment screws. Replace this carburetor if the chainsaw is difficult to start, stalls frequently, runs rough, surges at idle, or bogs down under load and cleaning or rebuilding the existing carburetor has not resolved the issue.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Hex screw for lawn mowers and outdoor power equipment. Secures components and panels. Replace if stripped, rusted, or missing for proper assembly.