22722101 Parts

Known as the primer bulb, this replacement part makes it easy for the engine to start. Responsible for circulating fuel through the carburetor, the purge bulb removes air out of the lines and allows the carb to have a new fuel charge before a start. The bulb may harden and crack over time, so it needs to be replaced to prevent an air leak. This is a genuine OEM part that works on different models of gas chainsaws from AYP, Craftsman, Poulan, and Husqvarna. This component is sold individually and comes with two screws.

This replacement refrigerator door gasket creates an airtight seal on the door to help maintain correct cooling and reduce frost buildup. Restores sealing performance to keep food colder and prevent moisture intrusion. What it does:

• Seals the door edge to maintain a cold interior and efficient operation
• Helps prevent warm air leaks that can cause temperature fluctuation
• Reduces frost and ice buildup in the fresh-food or freezer compartment
• Can improve cooling consistency and help avoid compressor overwork

• Disconnect power to the appliance before starting any repair.
• Remove food and any door-mounted items; support the door during gasket removal/installation.
• Replace the gasket by loosening/removing the door inner panel or pulling out the old gasket per OEM instructions; avoid sharp tools that might damage the door finish.
• After installation, check for even seating and close the door repeatedly to help the gasket form a proper seal; some gaskets may require gentle heating or a short break-in period per OEM guidance.

An air filter keeps out contaminants like grass clippings, pollen, dust, and more from many components of an engine. Air filters can suffer from a buildup on their surface over time that causes them to become less efficient. If your air filter is clogged, the right amount of air might not reach the carburetor, causing inefficiency in mixing the air with gas to create combustible fuel for your engine. If the engine will not start or runs rough, check the air filter of the carburetor and any other air filters on the machine. This repair may require a nut driver, a pair of pliers, screwdrivers, and a socket set to complete. This replacement should be easy and only take a short time. This air filter will fit a variety of different products, which means that repair steps will vary according to the machinery you intend to repair. This simple fix could save you from spending much more on a professional repair or total replacement of your equipment. This air filter is compatible with Craftsman, Husqvarna, and Poulan brand engines. It is a genuine OEM part.

A single replacement screw used to secure appliance components and restore proper fit. This OEM-design fastener replaces a missing or damaged screw so panels, brackets, or small assemblies stay properly attached. What it does

• Fastens panels, brackets, or small assemblies to maintain component alignment and stability.
• Replaces stripped, corroded, or lost screws that cause rattling or loose parts.
• Restores secure connections that can prevent vibration noise or component movement.

• One screw.

• Disconnect power and unplug the appliance before starting any work.
• Match screw head type and length to the original before installation; use the correct driver to avoid stripping.
• Tighten snugly but avoid over-torquing, which can damage threads or parts.

The clutch is designed to use centrifugal force to connect the shafts, while a drive shaft is nested inside. The clutch is made of durable metal and is sold as an individual assembly. These clutches are durable, but they also have the ability to function well beyond when they should be replaced. Therefore, even if the clutch hasn’t failed, it is important to pay attention to the performance of the engine. The repair is relatively simple and requires only a screwdriver and pliers to complete. Always wear gloves and disconnect the spark plug before performing any repairs on engine components like this clutch assembly. This OEM clutch assembly is manufactured to exact standards and is compatible with select models of gas chainsaws and other outdoor power equipment. It fits units from Poulan, Weed Eater, Husqvarna, and Jonsered.

This is a bar bolt used with several types of lawn and garden equipment. It is used to secure the bar to the housing of the unit. The metal bolt is made with durable components but corrosion, damage, or wear and tear can necessitate replacement. The bar bolt can also become stripped or fall apart and create issues with other components staying together.If the bar bolt appears to be damaged, has been lost, or is broken, it needs to be replaced. The replacement process will require a wrench since the bolt is designed with a hex head. Before making the replacement, make sure the equipment has been turned off and placed on a stable surface. Wearing work gloves, remove the old bar bolt before placing the new replacement component.This is a genuine OEM replacement part that has been sourced directly from the manufacturer. It is sold as an individual bolt. The bar bolt is designed to be used with string trimmers, pole prunes, and chainsaws manufactured by Poulan, Poulan Pro, Husqvarna, and Craftsman.

This engine gasket kit features several types and sizes of gaskets, which are typically used to help provide a tighter seal between connected parts. The tight seal helps to provide better performance for the chainsaw. It can also protect against leakage from the carburetor. The gaskets on a chainsaw will wear out or crack over time. Bad gaskets might cause the carburetor on the chainsaw to leak. Applying new gaskets will often take care of this problem. The authentic and genuine OEM parts are designed for use with chainsaws from Craftsman, Poulan, Poulan Pro, and Husqvarna. The engine gasket kit can help to get the chainsaw back in proper working order.

Nickel

Here is an authentic clutch friction washer that is sourced from the manufacturer. It is for use with several types of handheld outdoor power equipment. Other names for the part include clutch friction disk and clutch washer. The washer works as a friction disk that will help create the proper fit between components in the machine, which helps to engage the clutch. It is made from durable metal. The clutch friction washer that comes with the machine tends to be durable, but it may still need to be replaced at some point. The washer could become corroded, or it could break. It could also become lost when the owner is performing other maintenance on the machine. A wrench and screwdriver will typically be needed to conduct the replacement. Owners should check their manuals to ensure the correct location for installing the washer. The genuine OEM clutch friction washer is sold individually. It can work with more than 150 models of chainsaws, hedge trimmers, and string trimmers. Brands that have models compatible with the part include Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This piston pin retainer is an authentic OEM replacement part sourced directly from the manufacturer for use on gas-powered chain saws. This retainer holds the pin that connects the connecting rod and piston. This is a small metal ring that has an opening on one side. It should be replaced anytime the piston is accessed. When it is taken off during repairs, it loses its compression and should be replaced.Take the spark plug out to make sure the saw cannot be started. Refer to the chainsaw's model diagram for the exact location of the piston ring. Remove the side cover, bar, and chain from the saw. Take the top cover off and set the screws aside. Next, remove the starter assembly and top handle, then the clutch drum and clutch with a clutch removal tool. Continue to disassemble the saw until the piston is visible. Use needle-nose pliers to remove the piston pin retainer and install the new one. Reverse the steps to reassemble the chain saw. Reinstall the spark plug and check the chainsaw for proper operation.This piston pin retainer is a quality metal part that is sold individually. It is designed for use in chainsaws manufactured by Poulan, Husqvarna, and Jonsered.

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.

This adjustable pin bar is used on chainsaws and other lawn and garden equipment to ensure a blade is adjusted to the appropriate rate of tension. When the chainsaw blade is properly adjusted, it will cut faster and better. The pin bar is made out of a durable metal but can become damaged over time. If the pin bar is not working correctly or has broken, it will need to be replaced.If a chainsaw or pole pruner is no longer performing as well as it used to, the adjustable pin bar may need to be replaced. To replace this pin, the cover of the chainsaw will need to be removed. Take the gear that has the screw and pin bar on it out of the machine. Next, remove the broken adjustable pin bar and replace it with a new part. Reassemble the tool for it to be ready to use.This adjustable pin bar is designed for use on Craftsman, Poulan, Poulan Pro, and Husqvarna chainsaws, pole pruners, and string trimmers. It is a genuine OEM replacement component that is directly sourced from the manufacturer. The part is sold individually.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This is a replacement screw that is sourced from the manufacturer. The screw can be used for a range of applications on many types of lawn and garden equipment. One of the most common uses of this type of screw is to affix the housings, such as the starter cover, to the machine. Owners should refer to their equipment diagrams to ensure they are using the screws in the proper locations on their equipment. The screws could need to be replaced for any number of reasons. In some cases, they might become damaged or corroded and will need to have a replacement. Other times, the screws could become lost. When removing the housing from the equipment, the owner might misplace some of the screws and they will need to be replaced. Replacing the screws is simple and will only require a screwdriver. This is a genuine OEM screw that is sold individually. The screws can be used with more than 150 various models of chainsaws, string trimmers, and leaf blowers. Compatible brands include Poulan Weed Eater, Husqvarna, Jonsered, Poulan, and Poulan Pro.

The thrust screw is made of durable metal and will sit in between a stationary part and a rotating surface within many types of chainsaws. The purpose of the thrust washer is to support the load or motion on a shaft while preventing motion on the shaft. The thrust washer is used to create a surface that supports a bearing where there are moving parts. If the thrust washer becomes damaged or worn, it cannot support the bearings and it may also become damaged. When this occurs, it may cause a rattling or squealing noises. When removing the thrust washer for a replacement, the reel and line assembly needs to be removed. A small screwdriver of a pick can be used to disengage the C-clip so the user can remove the plunger, spring, and thrust washer. Replace the part with a new thrust washer and reassemble the other components.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as an individual part. The thrust washer is made for use with chainsaws manufactured by Poulan, Poulan Pro, Craftsman, and Husqvarna.