26922503 Parts

A small replacement closure shim that helps align and secure a closure/trim piece on select appliances, restoring proper fit and reducing rattles, rubbing, or gaps for quieter, more reliable operation. What it does:

• Positions and supports the closure/trim so panels and doors close evenly.
• Helps stop rubbing, misalignment, or minor gaps that can cause noise or poor sealing.
• Serves as a non-electrical spacer/aligner where the original shim has worn or broken.
• Useful when cosmetic trimming or closure pieces feel loose or shift during use.

• Disconnect power to the appliance before starting any repair or accessing panels.
• Access location may require removing the related trim, panel, or door—refer to the appliance diagram or service manual.
• Handle small plastic parts carefully; align the shim before fastening to avoid breakage.

This 4-terminal thermal overload protects the dryer motor by interrupting power if the motor overheats or draws excessive current. It helps prevent motor damage and stops operation when the motor is stressed. What it does:

• Senses motor over-temperature or excessive current and opens the circuit to stop the motor
• Commonly used when a dryer won't start, shuts off during a cycle, or the motor overheats
• Helps prevent further damage to the motor and related electrical components
• Works as part of the motor protection and safety circuit

• 1 overload (4-terminal thermal protector)

• Disconnect power to the appliance before servicing to avoid shock or injury
• Replace only with the exact part number or verified equivalent; confirm terminal locations when reinstalling
• Inspect surrounding wiring and motor for damage; replace any damaged components

This evaporator fan blade is the rotating plastic impeller that moves cold air from the evaporator across the freezer and refrigerator compartments, restoring proper airflow for even cooling. What it does:

• Circulates air over the evaporator coil so cooled air is distributed through the appliance
• Helps maintain even temperatures throughout the fridge and freezer sections
• Worn or damaged blades can cause reduced airflow, weak cooling, or abnormal fan noise
• Replacing the blade can restore normal airflow when the motor and housing are otherwise functional

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access typically requires removing the evaporator cover in the freezer compartment
• Inspect the motor shaft and blade hub for damage and ensure the blade seats securely on the motor
• If fan noise or continued airflow problems persist after installation, verify the evaporator fan motor and mounting components

This replacement part is a pivot tube. This is a genuine replacement part made by Husqvarna. This part is able to allow fluid and other necessary items to flow through the engine and turn when needed. The tube is an important part of any machine.A new pivot tube might be needed if the current one is damaged in any way or clogged. If the current pivot tube is not allowing for items to be passed through it, it is recommended that it be replaced as soon as possible. Be sure that the engine is shut down before replacing this part to prevent injury. The user should refer to the appropriate user guide for more information on how to replace this part. This pivot tube is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

This extension tube is used on blowers to extend the airflow further out and allow users to get closer to the ground when blowing leaves and grass clippings. The extension tube can also be used to clean gutters and areas overhead that would normally require a ladder. The extension tube does not need tools to remove and install. The tube is an accessory that is not required for the blower to operate correctly. The extension tube is made of plastic that may become cracked and brittle from the elements. If the tube is cracked, it should not be used with the blower, and a new one should be purchased. A cracked extension tube allows air to escape and reduces the efficiency of the blower. The extension tube should be stored out of the elements when not in use to extend the usable life of the tube. This is a black, molded plastic part that is individually sold. It is an authentic OEM replacement part sourced directly from the manufacturer. It is designed for use on blowers manufactured by Craftsman, Jonsered, McCulloch, Poulan, Poulan Pro, RedMax, Sears, and Weed Eater.

This part is a vacuum tube set that is used on outdoor power equipment blowers and vacuums. The vacuum tube is the component that directs the leaves and debris into the vacuum bag. The vacuum tubes are manufactured out of a hard plastic material.A new vacuum tube set will be needed if they are cracked, broken, or damaged in any way. This damage could be a result of direct impact with a hard object. The vacuum tube set may be needed to replace parts worn due to normal wear and tear over time. No tools are required to install the vacuum tubes. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This vacuum tube set is a genuine Husqvarna part. It is sold individually. This particular vacuum tube set is compatible with outdoor power equipment blowers and vacuums that are manufactured by Husqvarna and Craftsman.

This is a replacement bag that is used on leaf blowers from a variety of brands. The grass catching bag is used to catch grass and clippings, making it possible to reduce the amount of raking and cleaning up that needs to be done after using the blower when it is vacuum mode. Once the bag is full, unzip it and pour the contents into your container for garden waste or use it for mulch. While blowers will typically come with a bag, they may wear out over time or become damaged. Eventually, it will need to be replaced with a high quality, OEM replacement bag. This part is sourced from Husqvarna, which helps to ensure it will fit properly and will be high-quality. This Bag Blr Vac'n' sac will work with a range of different brands of blowers, including Husqvarna, Paramount, and Weed Eater.

This OEM replacement part is an inlet restrictor tube for leaf blowers. The inlet restrictor fits into the air inlet and is used to improve blower function. If the leaf blower is no longer functioning like it used to and is struggling to maintain its power, it might be time for a new inlet restricor tube. While this might seem like a difficult repair, replacing this part is actually a very simple process.To replace the inlet restrictor tube, make sure the engine is cool and the on off switch is in the off position. Remove the main tube from the leaf blower. Then locate the inlet restrictor tube at the base of the leaf blower. Using a flathead screwdriver, pry off the old inlet restricor tube and set it to the side. Slide the new tube into place and reinstall the main tube. This genuine OEM part is compatible with Husqvarna leaf blowers.

This left-side freezer glide helps the freezer drawer slide smoothly and stay aligned, restoring proper drawer movement and preventing binding or sagging. Fits the freezer drawer track and supports normal opening and closing. What it does:

• Guides and supports the freezer drawer on the left side for smooth travel
• Keeps the drawer aligned to prevent scraping, sticking, or uneven movement
• Reduces chatter and wear on the drawer and track from improper seating
• Common symptom: drawer sticks, drags, or drops on one side when opening

• One left-side freezer glide

• Disconnect power before working on the appliance and remove food from the drawer area
• Remove the freezer drawer per the manual to access and replace the glide
• Use basic hand tools as required; avoid forcing parts to prevent breakage

This replacement screw fastens internal components and panels so parts stay secure and quiet. It's a direct-fit fastener used where the original mounting screw is missing or damaged to restore proper assembly. What it does:

• Secures panels, brackets or components to prevent movement and vibration
• Restores proper alignment for covers and access panels
• Stops rattling or loose-fitting parts caused by a missing or stripped screw
• Works as the factory-specified fastener for the original mounting point

• The screw location and type before installing; use the original hole and thread
• Power off and disconnect the appliance before accessing internal components
• Start the screw by hand to avoid cross-threading, then snug with the appropriate screwdriver
• Do not overtighten — stop once the part is secure to avoid stripping or cracking