27430P Parts

A flat washer is used in conjunction with threaded screws or bolts. Before inserting and fastening a bolt into the surface, the fastener is inserted through its end. This is a typical application of washers because they distribute the fastener's load. It also helps with heat and friction reduction as the fastener is tightened. In some implementations, a flat washer also works as a spacer, as well as additional electrical insulation. A flat washer is made from metal. However, it can break down. One of the warning signs of a bad washer is that it doesn't have its distinct circular shape, appearing bent or cut in half. Replacing a flat washer is easy, however, and only requires a screwdriver or socket wrench (depending on the type of fastener). Loosen and remove the fastener. Then, take the broken fastener out. Insert the new flat washer into the fastener. Then, screw the fastener back. This flat washer is an original Husqvarna product. It is made for lawnmower models manufactured by Craftsman, Murray, Husqvarna, Ariens, Poulan, and Weed Eater. It is made of metal and is sold individually. Fasteners are not included.

This tire is a genuine Husqvarna part, sold individually. This tire can be used as a replacement part for a lawn mower. The purpose of a tire is to facilitate the steering of the appliance so an operator can navigate the appliance over a variety of surfaces in order to mow and clip the greenery.The tire of a lawn mower might have to be replaced at some point within the standard lifespan of the appliance if the tread or the internal structure is punctured, torn, ripped, scraped, or eroded beyond repair. If this occurs, the tire should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. It is a simple repair process that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This tire is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.

This part is a replacement steering shaft extension. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current steering shaft extension is defective or broken, this part can be used as a replacement. It is intended for use with a variety of lawn tractor models.The steering shaft extension is essential for equipment functionality as it connects the steering wheel to the steering shaft. If this part is bent, dented, snapped, or otherwise ineffective, the user may have trouble properly maneuvering the lawn tractor. Thus, this part should be replaced. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this steering shaft extension, the appropriate owner's manual and equipment diagrams should be referred to. This steering shaft extension is suitable for use on a variety of lawn tractor models manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is a genuine OEM replacement that is designed for use with riding lawn mowers. This idler pulley helps drive the engine of the Lawn Mower. This part experiences a lot of constant motion, which can cause it to wear over time. It can also become damaged due to an impact or in the course of other repairs, which would require a replacement. This genuine OEM part features a 3/8-inch mounting hole and 3.5-inch exterior diameter, and includes a one-year warranty and can provide a replacement for compatible engines. This OEM idler pulley is manufactured by Husqvarna and designed to be compatible with select machines from the brand, as well as brands like Poulan, Weed Eater, and Jonsered. It is made of durable plastic with a metal bushing and fitting and will provide an exact replacement fit for hundreds of compatible engines. This part is sold individually and does not include any necessary hardware. Ensure that the engine is cool and gloves are worn for hand protection when replacing this part.

This left-hand engine belt keeper is designed to be a replacement for riding mowers and lawn tractors. The purpose of the belt keeper is to stabilize the belt. This will help to reduce the amount of friction on the belt. If this part is damaged or missing, it could cause problems with the belt including premature wear and tear. In some cases, the mower will not function properly.The part is made from durable metal, but there is still a chance that it could break or become worn and corroded over time. If the owner notices any signs of damage, the belt keeper should be replaced right away to ensure the mower continues to function properly.The engine belt keeper can be used for many models of machines from Husqvarna, Poulan, Weed Eater, and Jonsered. The high-quality metal replacement piece is sold individually. It is a genuine OEM part that has been sourced directly from the manufacturer.

This part is a belt keeper. The belt keeper guides the path of a tractor belt that is between pulleys. The belt that these belt keepers hold is what transfers power to another pulley in the system, making the equipment run. A new belt keeper may be needed if the belt keeper is physically broken or damaged. If the belt routinely comes off of the belt keepers, this could be a sign that the belt keepers need to be replaced. Use caution when working with these parts. The operator should only perform care and maintenance on the machine when it is powered off. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer. It is sold individually. This belt keeper is compatible with lawn tractors manufactured by Husqvarna and Craftsman.

This is a genuine replacement shield browning for lawn mowers and garden tractors. The shield is used to protect the grass against heat from the muffler. The lawn mower shield browning can become damaged or worn over time, necessitating replacement. It is important to replace a worn shield browning to avoid damaging the lawn.A lawn mower shield replacement is a simple process. A socket set is needed for this project. The shield is located at the bottom of the lawn mower. Depending on the model, it is typically attached to a lower bracket near the lawn mower blade. The lawn mower shield is held on by two bolts, attached at its sides. To replace the part, remove bolts from the previous mower shield, and replace the bolts with the new mower shield browning. It is possible that the bolts attaching the mower shield browning have worn, in this case, find replacement bolts and dispose of any worn ones. This is a genuine Husqvarna replacement part. This part is compatible with Husqvarna, Poulan, and Craftsman lawn mowers. This part is sold separately.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This replacement part is a spring. Springs create torque and ensure that components remain secure during equipment use.Due to the amount of pressure they experience during use, springs can snap over time. If a spring has become loose and no longer holds enough tension, it should be replaced.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This is a replacement steering link. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective steering link on a variety of different lawn tractor models. This steering link allows the lawn tractor to be properly maneuvered. Wear and tear can cause this part to become damaged, and if the steering link is broken or faulty, it should be replaced immediately. Proper tools are needed to install this part. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this steering link, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this steering link is suitable for use on several different models of lawn tractors manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a replacement deck drive belt that has been sourced from the manufacturer. This belt is made specifically for use with garden tractors and riding mowers. The purpose of the belt is to rotate the blade on the mower. It is located on the mower's deck. Belts such as these tend to wear out over time. They can become stretched and loosen, and they can even start to crack and break. If this happens with the deck drive belt, the mower blades will no longer rotate properly, which means the user cannot cut the grass. Owners should check the belts on their mowers regularly and replace them as needed. This helps to ensure they do not start mowing with a bad belt and have it break partway through the lawn. This is a genuine OEM replacement deck drive belt for use with riding mowers and tractors. The belt is made from durable rubber and is sold individually. The belt works with more than 100 models of machine. Compatible brands include Craftsman, Husqvarna, and Poulan.

This replacement part is a flange nut. This is a genuine replacement part made by Husqvarna. This part is small but important in many types of machinery and appliances. Flange nuts work with other small parts to keep things secure and in place during use. A new flange nut might be needed if the current one is missing or damaged in any way. It is possible that the nut becomes stripped or worn down over time and should be replaced. Be sure the engine is completely powered down before replacing any part. This should be a simple repair and only require common household tools such as a screwdriver or pliers. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure a proper fit and long-lasting use.