Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

4174802701 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Clip Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 134408700

This clip is a genuine General Electric part, sold individually. It can be used as a replacement part for a dryer or a washer/dryer combination appliance. This clip affixes the toe panel to the front panel of the dryer.This clip could become damaged within the standard lifespan of a dryer; this damage could take the form of nicks, scrapes, tears, punctures, or erosion to the plastic material that reduces its functionality for a dryer. If the toe panel is coming loose from the front panel of the dryer, the clip should be visually inspected and assessed for signs of damage. If the clip is damaged, it should be removed and replaced with this genuine OEM replacement part. The replacement process is simple and will require no special tools.This is an OEM part sourced directly from the manufacturer. It is sold individually. This clip is compatible with the following appliance brands: Frigidaire, Kenmore, Electrolux, Westinghouse, and Crosley.

Do-It-Yourself Stories from Customers like You The dryer not heating up.   Anthony C. • Pleasant Valley , NY • August 07, 2021

Replaced heating element, thermostat, control thermistor, and belt, ordered grease and greased bearing, so far so good. Read more

More
Dispenser Assy
Genuine Frigidaire part
By: Frigidaire
Part Number: 134409350

 

More
Light Pipe
Genuine Frigidaire part
By: Frigidaire
Part Number: 134429100

 

More
Bracket
Genuine Frigidaire part
By: Frigidaire
Part Number: 134440700

 

More
Panel
Genuine Frigidaire part
By: Frigidaire
Part Number: 134496200

 

More
Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 134522100

 

Do-It-Yourself Stories from Customers like You The door on my 10 year old Frigidaire washer rusted and warped such that we couldn't close the door   Deborah R. • Madera , CA • September 22, 2017

I was willing to buy a new washing machine but, t found that I could not find an undercounter model that would fit in the space without major remodeling. I was able to find the exact hinges, screws, handle that I needed to repair the washer. At Appliance Parts Pros, I believe I can find all the parts needed to keep this old Frigidaire running like new indefinitely. Read more

More
Hose
Genuine Frigidaire part
By: Frigidaire
Part Number: 134586500

 

Do-It-Yourself Stories from Customers like You Odor and mold   Joel S. • Derry , NH • January 26, 2016

Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible... Read more

More
Wiring Harness
Genuine Frigidaire part
By: Frigidaire
Part Number: 134606800

 

More
Hose (Replacement)
Genuine Frigidaire part
By: Frigidaire
Part Number: 134679000

This replacement hose restores proper water flow for the appliance, helping stop leaks and restore normal filling or draining behavior. It's a direct-fit service part when the original hose is damaged or worn. What it does

  • Carries water between appliance components to enable filling, draining, or circulation
  • Replaces cracked, split, or brittle hose that can cause leaks or reduced flow
  • Helps resolve symptoms like visible leaks, water pooling under the appliance, or interrupted fill/drain cycles
  • Compatible as a like-for-like service hose when matched to the correct part number
What's included One replacement hose Install notes
  • Always disconnect power and shut off the water supply before starting work
  • Confirm orientation and routing match the original hose to prevent kinks and ensure proper drain/fill
  • Use new clamps or fasteners if the originals are corroded; tighten clamps securely but avoid over-tightening

More
Clip
Genuine Frigidaire part
By: Frigidaire
Part Number: 134781400

 

More
Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134844501

 

More
Panel
Genuine Frigidaire part
By: Frigidaire
Part Number: 134913103

 

Do-It-Yourself Stories from Customers like You Bottom of door on frigidare fron load washer was rusted   Peter D. • Hampshire , IL • January 30, 2015

I removed the door (naturally the screws were also rusted) and replaced the outer door skin with the replacement I ordered from you. It was a piece of cake once the screws were loosened with penetrating oil and help from a friends impact screwderver. Read more

More
Panel
Genuine Frigidaire part
By: Frigidaire
Part Number: 134913160

 

More
Front Panel
Genuine Frigidaire part
By: Frigidaire
Part Number: 137021510

 

More
Spring
Genuine Frigidaire part
By: Frigidaire
Part Number: 137099300

 

Do-It-Yourself Stories from Customers like You A suspension spring broke.   Donald R. • Levittown , PA • October 31, 2020

I believe the shock absorbers were bad and caused too much stress on the spring, breaking it. I replaced the spring, spring protector, and shock absorbers. I got lucky; when I got the drum back up where it belonged I saw that the door boot seal straightened itself back out and wasn’t damaged so I didn’t have to replace it. The whole job took about three hours and the washing machine runs more smoothly now than it did when it was new! Read more

More
Drum
Genuine Frigidaire part
By: Frigidaire
Part Number: 137105900

 

Do-It-Yourself Stories from Customers like You Spider supporting drum was broken   James S. • Passumpsic , VT • August 03, 2015

Follow instructions on internet. The only issue was the flat head allen drive screw securing the belt pulley to the shaft. Rounded the allen drive and wrench. Drilled two holes on opposite sides of allen drive hole. Elongated to make a long slot. Used impact driver to remove screw. Read more

More
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store
​