464Dyq1 Parts

This replacement slide is a small guide piece that helps a movable component in your appliance travel smoothly and stay aligned, restoring easy, consistent operation when the original wears or breaks and causes sticking or rough movement.

• Guides a moving part along its track for smooth, stable travel
• Helps maintain alignment to reduce friction, binding, and uneven motion
• Worn slides can cause sticking, scraping, popping noises, or misalignment
• Visible wear, cracks, or deformation indicate the slide should be replaced

• Disconnect power and shut off gas/water supplies before servicing
• Note the original slide's orientation and mounting points for accurate reinstallation
• Reuse existing screws/clips if applicable; tighten securely without overtightening
• Cycle the component through its full travel to ensure smooth operation

This replacement fan blade restores airflow in hood and ventilation blowers by moving air through the fan assembly. Use it to replace cracked, bent, or worn blades and help reduce vibration and noisy operation. What it does:

• Spins on the blower motor to generate airflow for ventilation and exhaust.
• Replaces blades that are cracked, bent, or visibly damaged and causing reduced airflow.
• Can reduce unusual noise and vibration caused by an imbalanced or broken blade.
• Helps restore proper vent performance when airflow is weak or inconsistent.

• Disconnect power to the appliance before starting any service.
• Remove the blower housing or access panel to reach the blade; follow OEM instructions.
• Keep fasteners and spacers in order during disassembly; reassemble with original hardware unless replacements are specified.
• If vibration or noise persists after replacing the blade, inspect motor bearings, mountings, and blower housing for damage.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This OEM replacement push cap can be used in a variety of lawn and garden equipment. The push cap is secured to the end of a shaft, providing protection to the user from the sharp metal edge of the shaft. The push caps that are included with the machines may wear out over time or fall off in some cases, creating an injury risk involving sharp metal edges. These push caps are high-quality and made from durable plastic. They are easy to install. The OEM push cap is a genuine part made by the original manufacturer, to ensure quality and s proper fit. The push caps can be used on lawn tractors, chippers, shredders, log splitters, and other equipment. Some of the brands that this push cap is compatible with include MTD, Husky, Yard-Man, Bolens, Troy-Bilt, Ryobi, Yard Machines, and cub Cadet.

This socket is the lamp holder designed to secure and connect a light bulb to the appliance, restoring reliable illumination. It provides the physical and electrical connection needed for compatible appliance lamps. What it does:

• Holds the light bulb securely and provides the electrical contacts for operation
• Restores lighting when a damaged or worn socket causes flickering or no light
• Compatible with standard appliance lamp replacements that match the original socket type
• Helps maintain proper bulb alignment for reflectors and filters to work as intended

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Inspect wiring and connectors for damage; replace if frayed or corroded
• Reinstall bulb and any removed trim or housing panels securely before restoring power

This replacement tube routes water from the refrigerator's defrost area to the drain pan to help prevent leaks and pooling. A simple, direct-fit part for restoring proper drain flow and reducing water buildup. What it does

• Channels defrost and condensation water to the drain pan to prevent interior pooling.
• Helps maintain normal drainage to avoid ice buildup or water leaks.
• Restores a damaged, cracked or clogged original tube where flow is restricted.
• Works as a service part when inspecting drain path during defrost/drain issues.

• One replacement tube.

• Disconnect power to the appliance before starting any repair.
• Remove access panels as needed and route tube along the factory path; avoid sharp bends or kinks.
• Inspect drain openings and heater components while replacing the tube.

This spring-style hose clamp secures flexible appliance hoses and helps prevent leaks by holding hose ends tightly to fittings. Reliable, low-profile design for use on drain, water, or vent hoses where a strong, consistent grip is needed. What it does:

• Provides a spring-tensioned grip to keep hoses seated on fittings and reduce leaks
• Commonly used on flexible drain or water hoses and small vent lines
• Helps maintain proper connection under normal vibration and thermal cycling
• Replaces worn, stretched, or corroded clamps that no longer hold tension

• One spring hose clamp (exact quantity as sold)

• Use pliers to expand the clamp, slide into position, then release to seat on the fitting
• Inspect hose ends and fittings for wear; replace hose if damaged before installing clamp
• Wear eye protection when compressing the clamp; keep fingers clear of the clamp's edges
• Tighten only as needed—over-compressing can damage the hose

This is a genuine OEM replacement pin commonly found in chippers and shredders. This pin is part of a larger clevis pin and helps secure the larger pin into an engine. Clevis pins are inexpensive metal fasteners that connect parts without having to thread into the body of another part. They have a three-part construction consisting of the clevis, a pin, and a tang. This part is the pin that fasteners the clevis. The most likely reason why this pin would need replacing is if it fell out while the engine was running. Engines produce enough heat to cause parts to expand, and it is possible that a clevis could have expanded and the pin fell out. Should this happen, the clevis will no long fasten, and the pin will need to be replaced. Clevises are found in multiple places throughout an engine, so be sure to follow the user's manual to identify the right part. This pin is compatible with MTD, Huskee, Bolens, and Troy-Bilt clevises and comes sourced from the original manufacturer. This pin does not include a replacement clevis. It ships individually.

This genuine MTD shredder screen determines the size of the shreds that the wood chipper will produce. A shredder screen covers any number of shapes and sizes of screens through which the wood will be chipped.A shredder screen might have to be replaced in the event that it suffers damage over time or in the case that the wood chipper encounters wood that is too hard or too brittle, which can break the shredder screen. The bars of a shredder screen can be welded back into shape by hand, but it is easier and safer to order a replacement shredder screen if it is subject to breaking, piercing, puncturing, or erosion to the metal material. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shredder screen is compatible with the following brands: MTD, Cub Cadet, Yard Machines, Yard-Man, Craftsman, and Troy-Bilt. This part is sold individually.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

A blade is the part of chippers and shredders that cuts the grass. It spins rapidly and pulls the grass up before cutting it. The grass is sucked into the deck, where the clippings continue to get chopped into smaller pieces before getting expelled. With regular use of the blade, after accidental damage, or because of the age of the machine, the blade may cease to perform adequately. Running the lawn equipment over rocks or other solid obstacles may also cause the blade to break. In any case, the blade has to be removed, and a new blade should be installed. Wear gloves for protection and handle the blade with caution. Make sure the machine is cooled entirely before beginning the repair.This blade is a genuine OEM part sourced directly from the manufacturer. It is made of durable, high-quality metal. The blade is sold as an individual unit. The replacement part is compatible with MTD, Troy-Bilt, Yard Machines, and Huskee brand lawn and garden machines, including chippers and shredders.

This damper is the vent backdraft flap that opens to let exhaust out and closes to keep outside air and odors from coming back into the appliance. It restores proper airflow control for venting systems. What it does:

• Opens when the fan runs to allow exhaust to flow through the vent
• Closes when the fan is off to prevent cold air, smells, and pests from entering
• Stops rattling or restricted airflow caused by a stuck or damaged flap
• Works as the airflow control element inside the vent housing or duct

• One damper assembly

• Disconnect power to the appliance before starting any repair
• Access the vent or hood housing per the appliance service instructions; removal of grille or access panel may be required
• Remove the old damper and any mounting hardware; install the new damper in the same orientation
• Check that the damper moves freely after installation and that duct connections are secure

This compressor grommet is a rubber mounting isolator that cushions and secures the compressor to the appliance chassis, helping reduce vibration and noise while preventing metal-to-metal contact and premature wear. What it does:

• Cushions compressor movement to reduce vibration transmitted to the cabinet
• Dampens noise and rattling caused by compressor operation
• Prevents direct metal-to-metal contact that can wear mounting points
• Helps keep the compressor positioned and secured under load

• Disconnect power to the appliance before accessing the compressor or base pan
• Replace grommets while supporting the compressor to avoid strain on lines and connections
• Inspect remaining mounting grommets; replace all worn isolators for best performance