Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This tub-bearing split ring is an OEM replacement part designed for GE washing machines. This part measures 2 inches in diameter. It is positioned between the inner and outer tubs to hold the tub bearing inside the outer tub. The Tub Bearing Split Ring not only supports the tub/hub assembly but also ensures smooth operation.
Symptoms of a bad Tub Bearing Split Ring include:
Causes can be extended use over time which leads to wear and fatigue of the split ring material. Cracks or breaks can develop, reducing its stability and load-bearing capacity.
This genuine GE replacement part is also compatible with Hotpoint, RCA and some Kenmore front-load models.
NOTE: For the washer outer tub seal order WH02X10383.
I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all... Read more
The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.
Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.
Symptoms of a bad Knob Clip include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more
The Timer is an OEM replacement part for GE washers. The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences. Causes may involve minor power surges exposing delicate components to uncontrolled fluctuations overtime. General wear from years of activating various thermal, agitation and spin functions can degrade sensitive electronics as well. Symptoms of a bad timer include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore model washing machines.
Replaced the knob and timer, the lugs were stripped out on the knob and damaged on the timer Read more
The Washer Top is an OEM part for GE washers. It is the upper panel that covers the internal components of the washing machine and provides a flat surface for loading and unloading laundry.
Causes of a bad Washer Top can include physical impact, warping due to prolonged exposure to heat or moisture, or general wear and tear over time.
Symptoms of a bad Washer Top include:
I bought and replaced the top and the lid for the washer. The washer now looks like a brand new washer even though it’s 12 years old. Total repair took less than an hour. Read more
Snapped in place Read more
The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system.
Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.
Symptoms of a bad Drain Hose include:
I did it Read more
Very simple fix. Part was fairly priced. Shipping and handling was a bit much. Fast ship. Only needed a nut driver, pliers, and a torx 20. The repair was super easy thanks to their little help video posted with the part Read more
I removed and inspected the lid magnet. It had a 1/8" layer of corrosion. I removed the layer of corrosion and reinstalled the part. the symptom improved. That was a stop-gap repair until the new lid magnet arrived. The broken rubber isolators were discovered when I removed the top of the washing machine. Read more
I ordered the motor, and followed the instructions. Splicing the included wire and taking out the fuse. Washer works fine now. I didn't have the installation tool, but I used a socket that fit over the bottom of the motor shaft and put the belt on. Read more
Harness to corset & shifter
New lid switch from Appliance Parts Pros Read more