We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Electronic Control Board is an OEM part for Whirlpool dishwashers. As the central processing unit, this board regulates all wash and rinse cycles according to preprogrammed instructions. It communicates timing and commands to other crucial components.
Symptoms of a faulty control board include:
Causes can involve water intrusion corroding circuits or individual component failure due to prolonged operation. Over time, environmental factors may inhibit board performance.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
It's very easy fix. If your unit flashing e2 f2. It's your relay board take screw if on door couple latched s on the gray relay box pull wires harness of slow. Re install the same way it came of Just remember to cut the power off first . Leave your door open when re powering unit. Read more
Fix a dishwasher detergent dispenser that won't open, is broken, or leaking rinse aid. Requires inner door panel removal for installation.
Replaced detergent dispenser. Read more
Drain hose connects dishwasher pump to exterior drain. Replace if cracked, leaking, chewed by rodents, or when check valve fails. Includes elbow connector.
I figured out that it was probably a plugged pump hose, since the pump would run, it somtimes it drained and sometimes it didn't. Your video helped with how to take the dishwasher out and replace the hose. I replaced the hose and everything is now working fine. It turned out to be a broken check valve in the old hose that caused the problem. It took 90 mins to do the repair. Read more
Connects the user interface to the main control board in your dishwasher. Replace if damaged, heat-stressed, or causing communication issues.
The dishwasher control panel was acting funny, not showing cycle times. So I pulled the plug and restarted it. Then it gave the E2/F2 code. Some googling turned up some ideas, beginning with checking the wires and voltages. I checked those, and found that the control panel was giving the proper voltage. The next step is to replace the user interface. I found the part on AppliancePartPros.com at a reasonable price. They sent it quickly. It was a fairly straightforward install, but you do... Read more
This small plastic clip secures the tine row guards or protective caps on the dishwasher's upper or lower dishrack. It keeps the vinyl guard strips in place so they can protect dishes from scratching and prevent the rack tines from rusting. Replace this clip if the guard strips are falling off, sliding out of position, or if the original clip has cracked or broken.
I searched the model on Appliancepartspros.com and ordered the items needed with overnight shipping. My order came the next day :) All parts were in stock and came clearly labeled and orderly packaged. Within 10 minutes my dishwasher was back in business and I was one happy camper. I would order from here again anytime and attempt to fixt the issue myself. Much cheaper that having somebody come out, only to tell you that they have to order the parts and come back at a later time to fix the... Read more
Replace a lost or damaged rinse aid dispenser cap that's causing leaks or evaporation. This cap seals the reservoir and makes refilling easy. Simple fix.
I ordered the plug and the plug you sent was the perfect part. Read more
Right-hand adjuster housing for dishwasher upper rack height adjustment. Replace broken, cracked, or missing housing with release lever mechanism.
Popped the piece apart and "popped" the replacement back in....Easy. A better illustration of how the parts "came apart" would have been helpful. Read more
This dispenser water tube routes water from the inlet to the refrigerator's in-door dispenser manifold, helping ensure a steady, leak-free flow to the dispenser.
Replaced spray arms and tube. Found all had debris in them and prohibited water pressure from reaching items. After replacement everything comes out sparkling. Don't understand how the spray arms getting plugged. Almost like waste water is recycled. Turns out to be a very easy project and if needed AppliancePartsPro has information and directions available at your finger tips.! Read more
This factory-spec screw secures panels and components in your appliance. Replacing a missing or stripped fastener restores a tight, rattle-free fit so parts stay aligned and operate as designed.
Replaced Wheel-Tub. Read more
Dishwasher overflowing or not filling properly? The water level switch controls fill amount. DIY-friendly repair, typically 20 minutes with video guide.
Replaced float switch and also replaced intake valve. Worked like a charm and the process was as easy as the YouTube video I followed made it seem. Read more
This is a small cap that covers and seals the rinse-aid reservoir on a dishwasher door. It keeps the rinse-aid liquid contained so it dispenses at the correct time during the wash cycle to prevent water spots on dishes. Replace this cap if it is cracked, warped, or no longer seals properly, which can cause rinse-aid to leak out prematurely or result in spotty dishes.
The part came by mail in a timely fashion and I seated the cap in the dispenser. It took all of 5 seconds. Thanks for your help in making sure I had the correct part APP.com. Read more
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines. Read more
Secures the flexible tine-row comb on your dishwasher rack. Replace this clip if it's cracked, broken, or missing to keep fold-down tines aligned.
Fixes broken heating element brackets causing sagging or rattling noises in your dishwasher. Simple snap-on replacement restores proper element alignment.
Fix dishwasher overflows and leaks with a new float assembly. Controls water level to prevent overfilling. Moderate DIY repair with video guide.
Removed bottom cover, located leak at float switch, removed and replaced float switch kit. The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the... Read more
If your dishwasher door drops, slams, or feels heavy, the door balance mount may be broken. This side-frame bracket anchors the spring system.
Replaced pump and motor. Read more