6651317 Parts

This inner tail ribbon cable transmits signals between the control/display assembly and the main harness, restoring reliable communication for user inputs and display functions. It's a direct replacement designed to match the original connector fit. What it does:

• Carries low-voltage data/signals from the control panel to the main board
• Restores unresponsive or intermittent control panel behavior
• Helps resolve blank or flickering display and erratic touchpad responses
• Maintains proper connector alignment and secure electrical contact

What's included: One inner tail ribbon cable Install notes:

• Disconnect power before beginning any repair to avoid shock or damage
• Handle the cable by the reinforced ends; avoid bending, kinking, or touching exposed contacts
• Ensure connectors are fully seated and retained with original clips or fasteners

The Latch Switch Kit, an OEM Replacement Part is designed to ensure the safe operation of your Whirlpool dishwasher. The kit includes two microswitches and a wiring harness. It prevents the appliance from running when the door is open. If defective, the door switch may prevent the dishwasher from operating even when the door is closed.

Causes of a bad door switch can include wear and tear, exposure to moisture, or a broken actuator.

Symptoms of a bad door switch include:

• Dishwasher not starting
• Dishwasher stopping mid-cycle
• Error codes related to door issues
• Dishwasher running with the door open

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Whirlpool push on retainer nut is an OEM replacement part responsible for securing the heating element in the dishwasher. It is located in the base of the dishwasher's tub to hold the heating element firmly in place. The push-on retainer nut keeps the heating element securely connected to the dishwasher's electrical system while allowing for easy removal and replacement when necessary.

Over time, push on retainer nuts can become loose, worn out, or damaged due to regular use, vibrations, or accidental mishandling. If a retainer nut fails, it can lead to parts becoming unstable or disconnected.

Symptoms of a bad push on retainer nut include:

• Loose or unstable dishwasher components
• Parts falling off or becoming misaligned
• Unusual noises during the wash cycle
• Difficulty in securing components within the dishwasher

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models

This is a durable pump and motor assembly for dishwashers. The purpose of the pump and motor is to pump water that goes through the spray arms when the dishwasher moves through a cycle. If the pump and motor assembly isn't working correctly, it could lead to dishes that are dirty after a cycle is complete. Other signs of a bad pump and motor include pooling water after a cycle and whining noises.If the pump and motor assembly need to be replaced, make sure the dishwasher is unplugged. Use a pair of work gloves to protect the hands throughout the process. Close the water supply valve and disconnect the drain line. Replacing the pump and motor assembly may require tilting the dishwasher on its side to disassemble the components that are in the way of the replacement. Once the pump and motor have been removed, install the new parts and reassemble the dishwasher before use.Created for use with dishwashers by KitchenAid, Kenmore, and Whirlpool, this pump and motor assembly is a genuine OEM replacement part. It is sold as a single part. This component is directly sourced from the manufacturer.

Color: gray. Measures about 3 inches wide by 8 inches high by 5 inches deep.

Roller assembly for dishwasher lower rack. Snaps onto rack to provide smooth rolling support. Replace if wheels are broken, cracked, melted, or worn.

This is a manifold assembly that connects the water supply to the spray arms inside the dishwasher. It directs pressurized water from the pump to the spray arms for proper dish cleaning coverage. Replace this part if you notice reduced water pressure in the spray arms, leaking beneath the dishwasher tub, or dishes coming out poorly cleaned due to inadequate water distribution.

Support bracket mount that secures internal dishwasher components. Replaces broken or worn brackets to restore proper alignment and stability.

This part is a pump and motor assembly. This component is made for use on dishwashers and is responsible for pumping water through the spray arms during the washing cycle. This part is essential for the operation of the appliance. If there is no water circulation during the dishwashing cycle, then the pump and motor assembly will need to be replaced. The spray arms spin during the washing process and this assembly causes the arms to spin, so if they are not spinning, this will be the correct replacement part. It is advised that the person performing the repair unplug the dishwasher from the electrical outlet or turn off the house circuit breaker for the dishwasher before attempting to replace this part. This particular pump and motor assembly is compatible with dishwashers that are manufactured by the Whirlpool, Kenmore, and Jenn-Air brands. It is sourced directly from the manufacturer and is sold individually.

Color: Biscuit. Size: 1 qt. can uncut. Enamel paint.

Mounting bracket that secures the thermostat assembly in your dishwasher. Replace this bracket if it's cracked, broken, or missing to restore stability.