721 62622200 Parts

This replacement part is a carburetor assembly. This is a genuine replacement part made by MTD. This part typically works with the engine in many machines and ensures the correct amount of fuel and air mixture is used when operating the engine itself. A new carburetor assembly might be needed if the user is unable to start the engine properly. If the machine is slow to start or is making unusual sounds, it might be due to a faulty carburetor assembly. Be sure the engine is shut down and cooled off before attempting to replace this part. Work gloves are always recommended when working near or around the engine. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a starter housing assembly that is intended for use with string trimmers. The starter housing assembly allows the string trimmer operator to start the machine by pulling the starter rope. This starter housing assembly includes the plastic housing, a starter pulley, starter spring, grip, and the pull rope with the screws to secure it. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.A new starter housing assembly may be needed if any component of this part is physically cracked, broken, or damaged in any way. Additional signs that the starter housing assembly is bad are if the string trimmer is not engaging when the pull rope has been pulled, if the pull rope has lost its tension, or if the recoil and starter are making odd noises.This starter housing assembly is a genuine OEM MTD part. It is sold individually. This particular part is compatible with string trimmers that are manufactured by MTD, Troy-Bilt, and Yard Machines.

Outdoor machines such as tillers and trimmers use gas-powered engines to run. These systems will have to idle without also allowing the machine to move or function. This is done through the use of a clutch that rotates the drum when the throttle on the machine is triggered or increased. When the operator needs the engine to remain idle without also cueing the drive shaft, it is the role of the clutch to keep things safe and functional. If a clutch begins to fail, the drive shaft may turn and the machine may not operate in a safe manner. This replacement clutch is made to work in a long list of yard and garden machines made by Craftsman, Yard Machines, Yard Man, Bolens, MTD, and Troy Bilt. This is an OEM replacement part that is made of durable materials and includes a single washer. It is shipped individually. The tools needed for this repair include a socket and wrench set.

This is a screw that is used for many pieces of lawn and garden equipment in a host of different ways. Screws such as this one are used to hold two components together. If the screw is not affixed properly or if there is an issue with the screw itself, it could affect the stability of the machine. If it is missing or not tight, it might also result in added noise when the machine is in use.Screws are made from metal and can last for a long time. However, if the threads are stripped or if the head of a screw wears down, it should be replaced. There is also the chance of corrosion or of losing the screw when working on the machine.This part is sold individually, and it can work well for a range of different machines from MTD, Craftsman, Bolens, and Yard Machines. This is a genuine OEM replacement part that is from the manufacturer.

This is a simple set of lawnmower ignition keys. They’re also used for an array of riding mowers, lawn tractors, and even snowblowers. To simplify repair and replacement procedures, most manufacturers use standardized keys for all their machines in a given class. As a result, a single key can be used for dozens of machines. The keys are manufactured from stainless steel, with an INDAK logo stamped into the center. Regardless of whether the machine is a walk-behind mower or a full-sized lawn tractor, a keyed ignition is easier to operate than a recoil cord. Similarly, replacing a key is generally straightforward. The exception is if the old key has snapped off in the ignition. In this case, a set of needle-nosed pliers can sometimes be used to extract the key. A powerful magnet can also be helpful if the broken key is being stubborn. In the worst-case scenario, the ignition may need to be replaced. This is an OEM part sourced directly from MTD, and it is sold as a set of two.

This part is a replacement push nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or detached push nut in snow blowers.Push nuts are a special type of fastener that secures together different equipment components. Push nuts will need to be replaced if worn, broken, lost, or otherwise ineffective. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this push nut, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This push nut can be used with different models of snow blowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This power cord extension is a genuine MTD part, sold individually. This power cord extension can be used as a replacement part for a snowblower. This power cord extension lengthens the reach of the power cord so that the appliance can be used from a greater distance from its direct power source while it is plugged in. The power cord extension might have to be replaced at some point if the cord suffers damage that renders it beyond functionality. This could occur if the cord is frayed, if it gets wet, or if it is punctured, torn, scratched, or eroded to the point that it does not power on the snowblower when properly plugged in. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This power cord extension is compatible with the following outdoor appliance brands: MTD, Toro, Cub Cadet, Ryobi, Tecumseh, Lawn Boy, Huskee, Montgomery Wards, Bolens, Yard Man, Troy-Bilt, and Yard Machines.

This is a clutch cable with a special design to ensure it fits a variety of snowblowers from different manufacturers. The clutch cable is the component on the blower that connects the control level with the clutch in the drive system so the snowblower can operate properly. Clutch cables can be damaged in various ways but the most common is for them to entirely break. If this occurs, the wheels on the snowblower will not move across the lawn. The clutch cable will need to be replaced to continue using the tool.Replacing the clutch cable on the snowblower will require the use of a 7/16 inch socket and a 3/8 inch socket. The first step is to disconnect the spark plug wire and ensure the equipment is in the off position. Next, the cover can be removed from the snowblower to easily access the clutch cable. Remove the old one and replace it with a new part.It is an authentic OEM replacement component that is sourced directly from the manufacturer and sold individually. The clutch cable is designed to be used in snowblowers manufactured by Yard-Man, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Yard Machines, and MTD.

The drive V-belt, manufactured by Craftsman, is used in one- and two-stage snow blowers as well as tillers. This is a drive belt that connects the engine to the auger of the tiller or snowblower via a pulley at either end. This turns the blades of the tiller or the auger blades of the blower to expel snow. As a flexible, hardened rubber part connecting other moving parts, a V-belt is considered “replaceable,” meaning that users should expect to have to replace this part during normal use of the equipment. Signs that a drive V-belt may be going bad are a squealing sound when the blower's auger or the tiller's blades are first engaged, or if the auger is slow to engage and loses power during use. To replace the V-belt, the equipment must be secured and the spark plug caps removed. Tilt the device to reveal the location of the belt. It must detached from the engine pulley and the transmission pulley. When replacing the V-belt, before tightening the pulley, make sure all moving parts are properly aligned. This genuine OEM part is compatible with machines sold by MTD, Yard Man, Craftsman, and Yard Machine.