Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fixes dual burner when inner ring stops heating or entire element fails. Common cooktop repair—disconnect power, lift top, replace element. Takes 30-60 minutes.
Replaced the entire burner. Four screws to remove front hinged pane lon front of stove One screw on each end of support bar for burners, Two clips holding burner on support bar. Two connections to burner. Four connections to thermostat.Remove all and replace in reverse order. New part requires one jumper wire on burner. Read more
White plastic handle that mounts to the front of your range oven door. Replace if your handle is cracked, broken, or screw holes are stripped out.
Replacing the trim takes a little bit of alignment and light force. The trim slides over the glass panel of the door, with the glass sliding into plastic tabs. We kept the door nearly vertical (almost closed), lined up the tabs on the trim with the glass door, and used mild force to slide the trim down onto the glass door. (Also, we found that the tabs on trim we ordered were much bigger than the tabs on our broken trim. This is probably due to slight variations in Frigidaire's design over... Read more
Screw that adjusts and secures the leveling leg to your range base or bracket. Replace if stripped, bent, or missing to restore stable footing and level your appliance.
I placed the burner cap on the burner and screwed in the leveling leg. Easy! Read more
Fix a burner stuck on high or not heating with this surface element switch. Controls power to your cooktop heating element. DIY-friendly repair.
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days... Read more
Burner not heating or burned out? This surface heating element restores your cooktop. DIY-friendly repair with online video guides available.
Replaced with a new element from AppliancePartsPros.com. Ordered online. Read more
Replacement motor that restores mechanical drive or airflow in select Frigidaire appliances. Installs in place of the original motor to help return normal rotation, tumbling or fan operation. What it does:
Replace door lock motor and switch assy Read more
Adapter assembly for oven vent system. Installs in back wall to align vent components. Replace if cracked, broken, or missing to restore proper fit.
Lightning Delivery - inserted and used a hammer and screwdriver to tighten unit...... Read more
Replace your range drawer body when cracked, warped, or difficult to slide. Includes integrated rollers for smooth gliding on tracks. Confirm fit with your model.
Ordered rollers for the rails and a new drawer with rollers. The drawer and its rollers came separately and not attached as shown in the picture. Once we got the rollers on the rails (had to remove rails from the stove in order to hammer the rollers for attaching) and the rollers on the drawer box we couldn't slide the drawer in past the rollers on the rails. Wound up taking the rollers off the drawer, pulling the stove out for access from the back. Reinserted the drawer and then reattached the... Read more
Size: 8 inch. 2200 watt. Radiant.
After watching the videos and reading the instructions on your website and the instructions which came with the new part, installation was easy. There was some simple rewiring involved with the included parts, but was simple. The replacement part actually arrived the day after it was ordered and I only paid for the standard shipping. Very fast. Read more
Burner won't adjust temperature or stays on one heat level? This dual infinite switch restores variable heat control for dual-ring surface elements.
Replacement machine screw used to secure appliance panels and internal components, restoring a stable fit and reducing rattling. Matches a 10-32 thread with a 17/32-inch length for original fastener locations. What it does:
I got online and researched what might be the possible cause of that problem with my Frigidaire countertop range. This model is probably 15 years old, but I was able to locate what appeared to be the cause of my problem, a broken switch. I found Appliance Parts Pros online and was able to identify the part that I needed. I was also helped by a conversation with a young lady who helped me identify the exact part for my model range. I ordered the part and it arrived in less than a week. I watched... Read more
Replacement mounting screw that secures panels, trim, and components in ranges and ovens. Needed when original screws are lost, stripped, or damaged.
Indicator light signals power and active burners on your cooktop control panel. Replace when dim, cracked, or failed. Verify fit with your model number.
Replaced light. Read more
Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.
Specs: 8 - 18 x 0.500
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.