Need Help?
Call or text
Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.
Threaded bases for two roller screws were ~ 80% broken off. Used a short (just barely extends past the end of the roller) sheet metal screw to secure the roller in the upper sliding section of the handle (handle in place first). The head was thick enough to fill the gap between the roller and the cover. Filling that gap accurately is important. Need to keep the roller pushed into the recessed area in the door. (Do a test fit with the parts before trying to install them on the door). Turn the... Read more
Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.
I found the condensing fan motor would not turn with power applied. I also found a drain tube cracked and breaking. I had to use a snub nose screwdriver to remove and replace condensing fan motor. The power wires were simply a snap on. The new drain tube just slipped on. Thanks for the speedy delivery! Stephanie Hobbs Read more
Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.
Refrigerator not cooling evenly or freezer too warm? A failed DC motor stops air circulation. This motor ensures proper airflow for consistent temps.
Watch youtube video to see how to replace fan motor. Ordered part from AppliancePartsPros.com and replaced it. Perfect match! Read more
Supports and guides sliding refrigerator drawers or shelves for smooth rolling. Replace if worn, cracked, or causing wobbling, sticking, or noise.
Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.
Took the door off by following an LG video which took about 10 minutes. I replaced the center hinge and put the door back on. Read more
Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.
I changed the compressor, dryer and upgraded the software. Read more
Refrigerator not cooling evenly or making loud noises? This evaporator fan motor circulates cold air across coils to maintain consistent temperatures.
This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.
Originally, replaced the door open/close motor thinking it was failing, but after a while ice chute door started to not fully open again. That left only two other failure modes - - signal pulse duration from control board, or the convoluted plastic link, lever, and cap assembly shaft binding/bending. Replaced them all. Since then operating correctly - - no further issues. It is possible the plastic levers and/or door cap shaft was binding, or bending, not allowing the cap to fully open. For... Read more
This dispenser lever holder is the mounting bracket behind the refrigerator's dispenser paddle. It supports and aligns the lever and switch so water or ice dispenses reliably when the paddle is pressed.
Refrigerator was easy. Simply replaced the activator switch that was sticking. The range hood was a little more difficult. I had replaced the switch years ago but it still didn’t work. So I took on the challenge of replacing the transformer. That was difficult to get to but once replaced and reassembled the lights work fine. Read more
Ice won't dispense but ice maker works? The ice bucket assembly stores and moves ice to the dispenser. Includes auger mount. DIY-friendly replacement.
Replaced with a new ice maker. Read more
Plastic fill tube that supplies water to the ice maker. Replaces cracked, broken, or detached tubes causing leaks in bottom-mount refrigerators.
Replaced one hose and union with clip. Read more
Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.
I opened the front cover (breaking the spear that holds it in place on the right hand side), easily removed the defective reservoir and replaced it with the new one. I also replaced the front cover with a new cover to make up for the broken spear. Took less than 10 minutes. Read more
If your refrigerator isn't cooling evenly or the freezer is warm, this evaporator fan assembly circulates cold air throughout both compartments for consistent temps.
Replaced condenser fan motor and both door gasket. It's working fine right now but still monitoring making sure air vents are not blocked. Im more impressed on the speed of delivery of parts I ordered. I used to order from Sears Parts direct where I have to wait for 2 excruciating weeks for parts to arrive. I will be using more of Appliance Parts Pros from now on. Thank you guys. Read more
Fix loud jackhammer sounds or weak water flow from your refrigerator dispenser. This filter head assembly houses the water filter inside the fridge.
This joint assembly is the connector that joins two refrigerator water tubes to form a tight, leak-resistant seal. Replace it to stop leaks at a line coupling and restore reliable dispenser and icemaker water flow.