We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Refrigerator won't cool or compressor won't start? This run capacitor provides the electrical boost needed for smooth compressor operation. DIY repair.
Unplugged frig to check connections, everything was ok. When I plugged it back in, nothing worked and the display and ice maker were flickering and clicking. Unplugged the display connector on the main board and could hear clicking from the main board itself. Replacing the main board and capacitor fixed it. I only replaced the capacitor as a precaution. it may not have been bad, but I did it for good measure. Everything is working great now and I don't have to buy a new refrigerator. Read more
Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.
Threaded bases for two roller screws were ~ 80% broken off. Used a short (just barely extends past the end of the roller) sheet metal screw to secure the roller in the upper sliding section of the handle (handle in place first). The head was thick enough to fill the gap between the roller and the cover. Filling that gap accurately is important. Need to keep the roller pushed into the recessed area in the door. (Do a test fit with the parts before trying to install them on the door). Turn the... Read more
Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.
Replace a cracked, broken, or missing refrigerator door basket. This bin mounts to the inner door to organize and hold bottles, condiments, and small items.
Fix loose or inconsistent mechanism action in your refrigerator with this tension spring. Restores smooth operation when worn spring causes parts to move improperly.
Refrigerator was easy. Simply replaced the activator switch that was sticking. The range hood was a little more difficult. I had replaced the switch years ago but it still didn’t work. So I took on the challenge of replacing the transformer. That was difficult to get to but once replaced and reassembled the lights work fine. Read more
The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.
Symptoms that you might need to adjust the door hinges and potentially need this wrench include:
This spanner wrench is also compatible with some Sears/Kenmore refrigerators.
This wrench is perfect for getting into a tight space. Read more
This dispenser lever holder is the mounting bracket behind the refrigerator's dispenser paddle. It supports and aligns the lever and switch so water or ice dispenses reliably when the paddle is pressed.
Replacement door bin for refrigerators. Mounts inside the door to hold bottles, jars, and condiments. Replace if cracked, broken, or missing.
I followed the video on AppliancePartsPros.com. But this is not easy as the person says. It took me some painful and careful prying with a plastic putty knife (I did not want to damage anything with a metal putty knife) and some struggle before I was able to remove the dispenser cover. Once this was opened it was not difficult to transfer everything from the old dispenser cover to the new one. I also replaced Water and Ice buttons with new ones. I planned to replace the Dispenser Touchpad.... Read more
Plastic fill tube that supplies water to the ice maker. Replaces cracked, broken, or detached tubes causing leaks in bottom-mount refrigerators.
Replaced one hose and union with clip. Read more
Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.
Replacing the door hinge and stopper assembly was very easy, once I figured out you had to disconnect the water supply on the back of the fridge before removing the door. Read more
Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.
Lift refrigerator up on side to replace it. Read more
This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.
Originally, replaced the door open/close motor thinking it was failing, but after a while ice chute door started to not fully open again. That left only two other failure modes - - signal pulse duration from control board, or the convoluted plastic link, lever, and cap assembly shaft binding/bending. Replaced them all. Since then operating correctly - - no further issues. It is possible the plastic levers and/or door cap shaft was binding, or bending, not allowing the cap to fully open. For... Read more
This funnel frame assembly mounts inside the refrigerator door dispenser area and directs crushed or cubed ice from the dispenser mechanism into your glass. It serves as the chute through which ice travels after being released from the ice bucket. Replace this part if ice is scattering, jamming, or not dispensing cleanly through the door dispenser opening.
Very easy fix. Chute/funnel snapped back into place. Read more
Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.
I changed the compressor, dryer and upgraded the software. Read more
The Magnet Switch is an OEM part for LG refrigerators. It plays an important role in monitoring the position of the refrigerator door.
The magnet switch works together with a magnet installed in the door gasket to detect when the door is opened or closed. It communicates this information to the control board which uses it to manage temperatures and fan speeds accordingly.
Causes of a bad magnet switch can include wear and tear over time, physical damage, or failure of internal components.
Symptoms of a bad magnet switch include:
This genuine OEM LG magnet switch restores the door monitoring functions of your refrigerator. It is also compatible with Sears/Kenmore refrigerator models.
The Door Gasket is an OEM part for LG refrigerators. It serves as a thermally-insulating boundary around the freezer door helping maintain intended sub-freezing temperatures.
Causes of a bad freezer door gasket can involve hardening of the rubber from prolonged exposure to freezer climate conditions. Mineral accumulation aggravates inflexibility over time as well.
Symptoms of a bad freezer door gasket include:
This OEM LG part is also compatible with some Kenmore models.
New seals Read more