Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Ge Jb750sf2ss Parts

Best Seller
Oven Temperature Sensor Assembly
Genuine Ge part
By: Ge
Part Number: WB21X22134

Fix F2 error codes and inaccurate oven temperatures by replacing a faulty temperature sensor. Simple 15-minute DIY repair with basic tools.

This part fixes the following symptoms
  • Oven is too hot
  • Won't start
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Oven would not come to full temperature; unreliable heating; heating elements apparently ok.   Stewart W. • Silver Spring , MD • May 07, 2022

My mother's GE range was not coming up to full heat (very far from it), and I was hearing a lot of relay-clicking coming from the control board. The heating elements seemed good. I suspected the control board was faulty, but there was a chance that it might be the (*much* less expensive) temperature sensor, so I ordered both from AppliancePartsPros.com (which got the parts to me very fast) so I could try the T-sensor first. After removing the doors and the back panel of the oven, and taking out... Read more

More
$23.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Surface Burner Control Switch
Genuine Ge part
By: Ge
Part Number: WB24T10029

Burner won't adjust temperature or stuck on high? This surface burner control switch restores heat control. Quick 10-minute fix with basic tools.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Large dual burner   Frederick E. • Athens , AL • September 19, 2014

Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails. My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because... Read more

More
$41.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Triple Haliant Element
Genuine Ge part
By: Ge
Part Number: WB30T10155

The Triple Haliant Element is an OEM part for GE cooktops and ranges, designed to provide versatile and powerful heating options. This element features a triple-ring design that allows for three different sizes of cookware to be heated efficiently on the same burner. It's ideal for situations requiring precise temperature control and flexibility, such as when cooking with large pots or pans that need even heat distribution.  

Causes for a Triple Haliant Element to fail can include prolonged use leading to wear and tear, overheating that damages the internal components, or electrical issues such as short circuits. 

Symptoms of a bad Triple Haliant Element include:

  • The element does not heat up
  • Only parts of the element heat up
  • Unusual fluctuations in heat levels

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Do-It-Yourself Stories from Customers like You Inner most burner not working on GE triple haliant burner.   Ben M. • Chattanooga , TN • October 05, 2023

Did research to determine what might cause problem. Determined that it was either the infinity switch or the triple haliant burner. Watched several YouTube videos on testing the infinity switch, but none exactly replicated this switch. Chatted with AppliancePartsPros.com on a Saturday on how to test, but later determined I needed more information, so I posted a question on the APP page for the triple burner. Received a quick response from APP which isolated the problem as the burner, not the... Read more

More
$203.47

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Cooktop Radiant Surface Element
Genuine Ge part
By: Ge
Part Number: WB30T10132

Burner won't heat or work? This radiant surface element restores your cooktop. Easy DIY fix in about 20 minutes with basic tools. Fits many models.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Element radiant both were broken because of long time using   Roy R. • Raleigh , NC • December 23, 2014

I easily unplugged the oven and unscrewed the top and those burners and replaced with new one. I plugged it back and tested them. both are working perfectly now. it was very easy and i did not have to pay for technician and labor. Read more

More
$62.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electric Range Oven Door Gasket
Genuine Ge part
By: Ge
Part Number: WB04T10086

Seals oven cavity to prevent heat loss during baking and broiling. Replace if worn, cracked, or heat escapes around door. Verify fit by model number.

Do-It-Yourself Stories from Customers like You Some friends gave us their glass top stove when they purchased a new one the range had a broken handle and needed a new door gasket to prevent oven heat leakage plus a good cleaning   Charles M. • Marysville , OH • January 26, 2016

I removed the door, mostly so we could really clean the all the nooks and cranny's of the stove, and make the handle and gasket replacement easier. Attaching the new handle was not difficult, but did require some minor door dis-assembly. Removing the old gasket and putting on the new gasket was a breeze. The hardest part of the job was putting the door back onto the stove, but we got it done and the stove looks and works great. Read more

More
$49.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Surface Burner Infinite Switch
Genuine Ge part
By: Ge
Part Number: WB24T10146

Burner won't turn off or stays on when set to off? This surface burner infinite switch controls heat levels. Takes 10-15 minutes to replace.

Do-It-Yourself Stories from Customers like You Burner wouldn't turn off   Bryan S. • Saint Louis , MO • May 06, 2016

Replaced switch! Easy.... Read more

More
$39.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Cooktop 5.5 Inch Radiant Surface Element
Genuine Ge part
By: Ge
Part Number: WB30T10145

Burner not heating? This 5.5" radiant element fits beneath glass cooktops. Common fix for non-working burners. Moderate DIY, 20-30 minutes to replace.

Do-It-Yourself Stories from Customers like You Burned out element in ceramic top stove.   John N. • Apopka , FL • August 09, 2021

Raised ceramic top, removed old element, installed the new one. Read more

More
$110.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screws - 12 Pack
Genuine Ge part
By: Ge
Part Number: WB1X500D

These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.

This part fixes the following symptoms:

  • Loose or wobbly parts or panels within the appliance's interior or exterior
  • Panels or components falling out of place, creating gaps or exposing internal parts
  • Unusual noises or rattling sounds during the appliance's operation

The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You The control knob spun freely without engaging to select cycle   Polly H. • Glen Allen , VA • November 11, 2014

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

More
$9.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Handle And End Cap Asm
Genuine Ge part
By: Ge
Part Number: WB15X27280

The Handle and End Cap Assembly is an OEM part for GE ovens. This assembly comprises the handle used to open and close the oven door, along with the end caps that secure the handle firmly in place. The handle measures 27.5 inches long

Over time, the handle and end caps can become worn or damaged due to frequent use, exposure to high temperatures, or accidental impact. Such issues can make it challenging to operate the oven door properly and safely.

Symptoms of a bad Handle and End Cap Assembly include:

  • Difficulty in opening or closing the oven door
  • A loose or wobbly handle
  • Visible cracks or damage to the handle or end caps
  • The handle detaching from the oven door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Missing end cap on handle.   Jodi L. • Oshkosh , WI • December 11, 2023

The new handle fit perfectly. Read more

More
$62.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electric Range Terminal Block Assembly
Genuine Ge part
By: Ge
Part Number: WB17T10011

Range won't heat or burners stopped working? A burnt or melted terminal block may be the cause. This wiring connection hub routes power to elements. DIY repair in 10-20 minutes.

Do-It-Yourself Stories from Customers like You Small fire & smoke terminal block must have gotten to hot & melted causing short to back of stove   Jack M. • Zebulon , NC • May 31, 2015

Removed damage terminal block ordered new block on line. when I received new block installed it stove works fine easy to replace. If I had not been home at the time when this happen it may had cause a big house fire. Read more

More
$58.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Rear Door Support
Genuine Ge part
By: Ge
Part Number: WB02X33180

The Rear Door Support is an OEM replacement part for GE ranges. Located at the base of the range, this bracket provides weight-bearing support for the lower oven drawer. It facilitates smooth extension and retraction of the drawer.

Causes of faulty support can include cracks or fractures developing over extended use, worn joints unable to sustain drawer weight, or misalignment from repeated opening/closing stress.

Symptoms of a bad support include:

  • Loose or sagging lower oven drawer
  • Grinding or binding noises when operating the drawer
  • Difficulty fully extending or retracting the drawer
  • The drawer not sitting securely in a closed position

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges.

Do-It-Yourself Stories from Customers like You Rear supports missing from bottom stove storage drawer   Tim H. • West Boylston , MA • September 18, 2015

So, in the process of a kitchen remodel my GC managed to lose *both* of the rear plastic supports for my GE stove! The drawer was totally unsupported without the brackets. I managed to find them on your site and see that they were a new and better design (rear mount with screw vs side mount and no firm mounting). The install was a snap and the brackets work excellent. I wish I knew that there was a new design years ago or I would have bought them much sooner! Thanks!! Read more

More
$11.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Oven Door Glass - Inner
Genuine Ge part
By: Ge
Part Number: WB57K5230

Inner oven door glass installs inside the door cavity behind the outer panel. Replace if shattered, cracked, or broken to restore viewing window function.

Do-It-Yourself Stories from Customers like You Inner window on ge range shattered   Jim B. • Burien , WA • December 29, 2014

I ordered the part from APP, removed the door, removed the inside panel and replaced the glass. Hardest part was figuring out exactly which screws to remove to open the door. Read more

More
$161.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Hidden Bake Element Assembly
Genuine Ge part
By: Ge
Part Number: WB44X45499

Oven slow to heat or not heating at all? This hidden bake element delivers consistent bottom heat for proper baking. Moderate DIY, about 1 hour.

Do-It-Yourself Stories from Customers like You Oven slow to heat   Rictor G. • Peoria , AZ • February 23, 2015

I called GE and they sent a tech out. $89 service call. Had I REALLY inspected the oven the hidden element had blown and separated and part of it welded itself to the inside of it's compartment. GE wanted another $350 to come back and fix it. I bought the part here for around $55 and had it running again in about an hour! Read more

More
$50.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Hot Surface Indicator Light
Genuine Ge part
By: Ge
Part Number: WB27T10668

Indicator light illuminates when cooktop surface is hot. Replace if light stays on constantly, fails to light, or housing is cracked. Verify fit by model.

Do-It-Yourself Stories from Customers like You A burned out cooktop sensor life letting you know that there was still heat in the burner after it's been shut off   Henry B. • Chittenango , NY • December 13, 2019

Fixed it in less than 10 minutes easy peasy just plug and play. Took the part you guys sold me and took the old part out, and put the new part on and just put two screws back in to secure the cooktop all set can't thank you, folks, enough. Read more

More
$9.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electric Range Control Knob
Genuine Ge part
By: Ge
Part Number: WB03T10337

Replace a cracked, stripped, or missing control knob on your electric range. This knob assembly fits the control shaft to restore smooth temperature settings.

More
$35.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Oven Screw (10-32 Thread)
Genuine Ge part
By: Ge
Part Number: WB01T10008

10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.

Do-It-Yourself Stories from Customers like You Oven door wouldn't close tightly new hinges didn't fix the problem   Paul S. • East Wenatchee , WA • October 26, 2020

All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more

More
$11.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google