Kenmore 91132359590 Parts
Genuine Ge part
By: Ge
Part Number: WB02X26088
Foam seal tape creates an airtight barrier between your cooktop and countertop, preventing spills from dripping into cabinets. Replace when worn or gaps appear.
Do-It-Yourself Stories from Customers like You
GE profile cooktop problems: dirty switch seals in glass top shorted infinite switch broken selector switch missing knob Hugh A. • Weaverville , CA • March 06, 2019
My cooktop repair was a total success from start to finish. I reviewed and later followed the APP repair video, which helped me decide if I wanted to tackle the repairs and guided me right before I started. The APP phone staff member was very helpful verifying the parts I had identified online using the model number of my older GE Profile cooktop to locate and view the correct online exploded view diagram. I told him it was a pleasure working with him. The parts arrived within 3 days of...
Read more
More
$45.61
- Compare At:
-
$54.28
- You Save:
-
$8.67
Genuine Ge part
By: Ge
Part Number: WB1X500D
These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.
This part fixes the following symptoms:
- Loose or wobbly parts or panels within the appliance's interior or exterior
- Panels or components falling out of place, creating gaps or exposing internal parts
- Unusual noises or rattling sounds during the appliance's operation
The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle.
https://www.youtube.com/watch?v=cQwLtRcHx9k
Read more
More
$9.48
- Compare At:
-
$10.43
- You Save:
-
$0.95
Genuine Ge part
By: Ge
Part Number: WB1X1293
Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.
Do-It-Yourself Stories from Customers like You
Failure to hold temperature after preheating. Michael D. • Wilmington , DE • January 07, 2023
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza!
Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days.
I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I...
Read more
More
$11.34
- Compare At:
-
$13.38
- You Save:
-
$2.04
Genuine Ge part
By: Ge
Part Number: WB13K18
Fix burners that won't light or click continuously. This igniter electrode sparks to light gas burners. Easy 5-10 minute repair with a screwdriver.
Do-It-Yourself Stories from Customers like You
Stovetop kept clicking but no flame Jeffrey W. • Kendall Park , NJ • June 12, 2014
Did some research to find out it was the electrode. Pulled out the old one to match what was on your site. It came in no time at all, and the replacement was a cinch.
Read more
More
$49.45
- Compare At:
-
$59.34
- You Save:
-
$9.89
Genuine Ge part
By: Ge
Part Number: WB24T10071
The Switch Gas Valve is an OEM part for GE ranges. It is responsible for controlling the flow of gas to the burners, allowing them to ignite and maintain a steady flame for cooking.
Causes of a bad switch gas valve can include wear and tear over time, buildup of debris or grease, or damage from repeated use or accidental impact. These issues can hinder the valve's ability to regulate gas flow effectively.
Symptoms of a bad switch gas valve include:
- Burners not igniting
- Irregular or weak flame
- Gas odor near the stove
- Inconsistent burner performance
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
One of my gas range's was not igniting Mark M. • Centennial , CO • June 23, 2014
Bought this switch gas valve for the non-functional burner, and it cleared right up.
Read more
More
$50.62
- Compare At:
-
$60.24
- You Save:
-
$9.62
Genuine Ge part
By: Ge
Part Number: WB19T10078
Gas pressure regulator for cooktops and ranges. Installs on the gas supply line to control flow to burners. Replace if cracked, leaking, or missing.
Do-It-Yourself Stories from Customers like You
There was no regulator Daniel N. • Bakersfield , CA • September 19, 2015
When I moved in to my new house I noticed there was no regulator, and the gas line was copper tubing. I ordered a regulator and ran 40 of trac pipe to make it up to code. Hooking up the regulator was easy.
Read more
More
$56.61
- Compare At:
-
$67.37
- You Save:
-
$10.76
Genuine Ge part
By: Ge
Part Number: WB31K5076
This is a large burner bowl replacement that can work with many models of stoves and ranges. Another term for these bowls is drip pan. The purpose of the drip pans is to protect the inner workings of the stove. They catch spills and drips when cooking. The stove shouldn't be used if the drip pans are damaged or missing.The main reason that the burner bowl might need to be replaced is that it has become dirty and can't be easily cleaned. Additionally, there is the chance that the burner bowls could eventually start to rust. This is a simple repair and should take only a few minutes. Be sure to unplug the stove or turn off the gas before starting a repair.The large burner bowl is for use with certain models of range from Whirlpool, General Electric, Kenmore, and Hotpoint. It is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.
Do-It-Yourself Stories from Customers like You
Drip bowl for my GE profile cook top natural gas burner (the large one) was rusting out at the rim Richard S. • Sterling , VA • March 20, 2018
I bought the replacement drip bowl - large and the rubber gasket which was delivered quickly.
Specific steps:
1)turn off electricity to cook top
2) remove burner grate, burner cap and collar
3) remove two Philips head screws near center hole
4)lift out drip bowl and reach under it to remove electric plug to igniter. Note how old gasket fits on drip bowl.
5)take out retaining clip on igniter and remove igniter
6)clean up surface where new drip bowl will contact cooktop
7)stretch new rubber...
Read more
More
$21.76
- Compare At:
-
$26.11
- You Save:
-
$4.35
Genuine Ge part
By: Ge
Part Number: WB1M1
ST10-16 X 7/16"
Do-It-Yourself Stories from Customers like You
Bottom heating element not working on a ge electric range David K. • Portsmouth , RI • December 21, 2014
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy.
Read more
More
$9.48
- Compare At:
-
$10.43
- You Save:
-
$0.95
Genuine Ge part
By: Ge
Part Number: WB31T10006
Replace your cracked, broken, or missing range burner grate. This cast iron grate supports cookware above the burner for stable cooking surface.
Do-It-Yourself Stories from Customers like You
The drip pans were beyond cleaning any longer. Kenneth P. • Fayetteville , TN • August 24, 2020
Replaced with new from Appliance Parts Pros.
Read more
More
$123.59
- Compare At:
-
$148.31
- You Save:
-
$24.72
Genuine Ge part
By: Ge
Part Number: WB31K5081
Small burner bowl sits beneath surface coil element to catch spills and shield internal components. Replace if cracked, chipped, stained, or worn.
Do-It-Yourself Stories from Customers like You
Drip pans on gas cooktop were dirty Frank V. • Hampton Bays , NY • March 09, 2016
After trying to clean the drip pans on my GE gas cooktop numerous times I went online and found AppliancePartsPros.com. The parts were very affordable and they had them in stock. They even had a help section that showed me how to install them. In two days they were delivered to my doorstep and it took less than an hour to install. Now my cooktop looks brand new.
Read more
More
$31.95
- Compare At:
-
$38.34
- You Save:
-
$6.39
Genuine Ge part
By: Ge
Part Number: WB31K5077
This is a medium burner bowl, also sometimes known as a drip pan, and it is made for ranges, stoves, and cooktops. This is a genuine replacement part made by General Electric. The burner bowl is situated underneath the heating element and is able to catch any food or debris that falls when cooking. The bowl or drop pan is there to catch any and all waste so that the user may easily clean up after the heat is turned off and the appliance is cooled down.A new medium burner bowl might be needed if the current one is damaged in any way including being broken or bent so that is it not fully secure under the burner. This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with ranges, stoves, or cooktops made by General Electric.
Do-It-Yourself Stories from Customers like You
Years of crusted on debris in burner bowls Calvin W. • Sunnyvale , CA • August 05, 2016
Repair was really simple. Removed power from stove to insure igniter would not fire. Removed parts to gain access to 2 screws securing burner bowls to stove top. Removed screws. Lifted up burner bowl and disconnected igniter wire from igniter and removed old burner bowl seal. Transferred igniter to new burner bowl and installed new burner bowl seal.Connected igniter wire and secured burner bowl assembly to stovetop with screws. Replaced parts removed earlier. Repeated process for each burner,...
Read more
More
$28.27
- Compare At:
-
$33.92
- You Save:
-
$5.65
Genuine Ge part
By: Ge
Part Number: WB2K5328
This hold-down bracket secures a designated component inside your appliance, keeping it firmly anchored during use. Replace a bent, broken, or missing bracket to stop movement and rattling and restore proper alignment and a stable, factory fit. What it does:
- Anchors the specified part to the appliance frame/cabinet to prevent shifting
- Reduces vibration and rattling noises during operation
- Helps maintain correct alignment and spacing for reliable performance
- Replace if the bracket is bent, cracked, corroded, or missing
What's included:
Install notes:
- Disconnect electrical power; for gas appliances, also shut off the gas supply
- Note the original orientation and screw locations before removal (a quick photo helps)
- Reuse existing mounting hardware unless your model specifies new fasteners
- Do not overtighten; verify the secured component is aligned and stable before restoring power
Do-It-Yourself Stories from Customers like You
Gas valve stuck in open position Timmy L P. • Dandridge , TN • September 26, 2020
Ordered new gas valve and new knobs replacing broken.
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB1K5062
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
Do-It-Yourself Stories from Customers like You
Cooktop needed aesthetic overhaul. Barbara B. • Wyncote , PA • March 26, 2020
I replaced damaged burner bowls (drip pans), now my cooktop looks like new!
Read more
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB1X1137
Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Ge part
By: Ge
Part Number: WB1X1261
Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB31T10007
Cast iron grate that sits over range burners to support cookware. Replace when chipped, cracked, or scratched from wear. Installs on cooktop surface.
Do-It-Yourself Stories from Customers like You
Many things need to be improved Jolene P. • Stevenson Ranch , CA • April 10, 2015
I was cleaning my cook top and had put the knobs in the water to clean them. I forgot to take one out. Turned on my garbage disposer and you know what happened to that knob. The cook top is 17 years old. Never thought I would find a match. Well, I went to Appliance Parts Pro and a nice guy helped me order. One of my cook top pans was getting scratched from all the cleaning. They had that too and also a new grate. Now my cook top looks like new and spent less than $150.00
I couldn't be...
Read more
More
$100.95
- Compare At:
-
$121.14
- You Save:
-
$20.19